ASRock 4X4 BOX-7000/D5 Series mini PC Based User Guide

ASRock 4X4 BOX-7000/D5 Series mini PC Based

Package Contents

The barebone system does not include memory, a hard drive, and M.2 SSD .

The pictures shown in this quick installation guide are examples only, the actual look may be different slightly.

Product Overview

SO-DIMM Slots

How to Install the Memory Modules (DDR5)

1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
2. Push down until the modules snap into place.

Note:

• The 4X4 BOX-7000/D5 Series requires DDR5 SO-DIMM.
• For dual channel configuration, you always need to install identical (the same brand, speed, size, and chip type) DDR5 SO-DIMM pairs.

WiFi Module

How to Install the WiFi Module (Optional)

1. Locate the WiFi Module slot on the motherboard.
2. Carefully insert the WiFi Module into the slot.
3. Tighten the screw to secure the WiFi Module to the motherboard.

Bracket

How to Remove the M.2 SSD (Type 2280) and the Bracket

1. Release the screw and carefully remove the M.2 it into place. SSD (Type 2280).
2. Release the screw and remove the bracket from the motherboard.

M.2 SSD

How to Install the M.2 SSD (Type 2260)

1. Locate the M.2 slot on the motherboard. Install the standoff.
2. Carefully insert the M.2 SSD into the slot.
3. Tighten the screw to secure the M.2 SSD to the motherboard.

2.5-inch Hard Drive

How to Install the Hard Drive

VIDEO TUTORIAL
Scan the QR code to watch the step-by-step video tutorial on how to install the hard disk drive on the 4X4 BOX-7000/D5 Series.

1. Remove the four screws on the bottom case. Then lift up and remove the bottom panel.
2. Attach the HDD to the hard drive mounting bracket and secure it using the four screws. Then connect the SATA Data and Power Cable to the HDD.
3. Attach the HDD assembly to the bottom panel and secure it using the four screws.
4. Connect the SATA Cable to the connector.
5. Then reinstall the bottom panel.

How to Install the VESA Bracket

1. Attach the two screws to the base of the 4X4 BOX-7000/D5 Series.
2. Attach the VESA Bracket to the rear of a compatible display using the four screws.
   • Choose mounting holes depending on the mounting hole pattern of your LCD screen (75 mm × 75 mm or 100 mm × 100 mm).
3. Mount the 4X4 BOX-7000/D5 Series by sliding it into place.

Positions of the 4X4 BOX-7000/D5 Series

The 4X4 BOX-7000/D5 Series can be placed in a vertical or horizontal position .

Please note that keeping the 4X4 BOX-7000/D5 Series in a vertical position will ensure better cooling performance.

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Warranty Term

• Warranty of host of 4X4 BOX-7000/D5 Series super m microcomputer (casing excluded): 1 year
• Warranty of transformer (including the plug) and wireless module: 1 year
• Our warranty does not cover the casing of the product, the CD drive, the metal frame, fastenings and screws, or packaging accessories.
• Data stored in the product may be lost as a result of the repair work or re-formatting of the hard drive disk. We do not provide data recovery services or data storage. Please back up your data regularly to protect the data and avoid loss. For details of our warranty terms, please refer to the individual warranty statement applicable to the district where your product was bought.

Safety & Regulatory Information

• Failure to use the included Power Adapter may violate regulatory compliance and may expose the user to safety hazards.
• Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used Batteries must be in accordance with local environmental regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>