LUXPRO LP1100V3 High-Output Universal Large Flashlight User Manual
- June 6, 2024
- LUXPRO
Table of Contents
LUXPRO LP1100V3 High-Output Universal Large Flashlight
High-Output Universal Large Flashlight
Features
- Constructed with aircraft-grade aluminum
- Long range LPE optics
- Patented TackGrip molded rubber grip
- Ergonomic side button
- IPX4 waterproof rating
- Batteries included (2 D)
ANSI/PLATO FL1 STANDARD
Operation Instructions
On/Off: Press and release the button on the side of the light to turn on and off.
Cycle Modes:
First turn the light on by pressing down the button on the side of the light completely and releasing. Half-press the button to cycle through modes (High/Low/Strobe). Turning the flashlight on and off, quickly and repeatedly will also cycle the light through the three modes.
Battery Replacement
The LP1100V3 uses 2 D batteries.
To replace the batteries, turn the tail cap counterclockwise to remove it. Tip
the light downward to slide out the old batteries. Insert new batteries (+)
side facing down. For best results, we recommend using brand new alkaline
batteries that are the same voltage and brand. Re-attach the tail cap by
pressing down lightly and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.
Product Warranty
The LP1100V3 has a Limited Lifetime Warranty Against Manufacturer’s Defects
from time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>