Aura Full Body Analysis Scale User Manual

Aura Full Body Analysis Scale

Please read this manual before using the scale and keep it for future reference.

1. Download the Fitdays App from the Apple Store or Google Play.
2. Remove the plastic sheet from the battery cover.
3. Place the scale on a hard flat surface.
4. Measure with bare feet and make full contact with the sensors.
5. Turn on the smart app and connect to the scale before measuring.
6. Follow the instructions below and make sure your posture is correct before measuring.

THANK YOU FOR YOUR PURCHASE!
Aura Full Body Analysis Scale uses bio-electrical impedance analysis (BIA) technology to help you conveniently measure body weight, body balance, body fat rate, visceral fat, body water, skeletal muscle rate, muscle mass, bone mass, protein, BMR, body age and more.

WARNING

• DO NOT use with medical implants such as pacemakers.
• DO NOT stand on the edge of the scale or jump on it.
• DO NOT overload the scale (Max.180kg/440lb/28st).
• DO NOT drop the scale or drop objects on it as this may damage the sensors.
• DO NOT immerse the scale in water or use chemical cleaning agents. Clean the scale with a slightly damp cloth.
• Not recommended for pregnant women, infants, toddlers or children under 10 years of age.
• Any measurement obtained using this device is for reference only and should not be considered as a medical opinion.
• DO NOT use to diagnose or treat any medical condition. You should consult your primary care physician before making changes to your diet, exercise plan or physical activities.
• Always place the scale on a hard, dry and flat surface before measurement. Make sure your feet are dry before stepping on the scale.
• Connect the batteries in accordance with the correct polarities indicated. Remove batteries if the scale will not be used for a lengthy period of time.
• DO NOT use the device if damaged. The continuous use of a damaged unit may cause injury or improper results.
• Please check the device before each use.
• Ensure that the batteries installed are functional.
• Be careful when using on the wet and slippery surface.

PRODUCT SPECIFICATIONS

INDICATION SYMBOLS

• Lo
  The batteries in the scales are exhausted.
  Insert new batteries (see the “Replacing the Batteries” chapter).

• Err
  The scale is overloaded.
  More than 180kg are on the scales.

• C
  An error has occurred during the reading. Step off the scale, wait 5 seconds and then step on again to restart the process.

PRODUCT OVERVIEW

INSTALL THE FITDAYS APP

1. Scan the QR Code or download the Fitdays app from the Apple Store or Google Play.
2. Download and install the Fitdays app on your device.
3. The App icon will appear on your phone or tablet after the installation is completed.

INSTRUCTIONS FOR USE

1. Open the Fitdays app on your device.
2. Register your account by email or login with social media account.
3. Add your personal data and confirm.
4. Make sure Bluetooth is on. Make sure Bluetooth Authorization, GPS and Localisation are allowed on your device.
5. In the back of scale, pull out the insulation sheet, then place the scale on a hard flat surface. Step onto the scale with a single foot to activate it. Wait until the display shows “0.0lb”.
6. Pair the scale through Bluetooth. Make sure the scale is on when pairing. Leave the app on its main screen, it will connect automatically.

TROUBLESHOOTING BLUETOOTH ISSUES

If the regular connection to Bluetooth failed, please try the below steps:

• Reset the scale by taking out one battery for 5 seconds and putting it back in.
• Reset the Bluetooth connection. Ensure Bluetooth and GPS (Android only) are enabled on your device.
• Under the “Account” section, select the “Device”. Slide it left to delete the current device. Tap “+” on the top right to enter pairing mode. Step onthe scale with single foot to activate it. After a few seconds of loading, the scale name will appear, tap and confirm it. Step on the scale again to complete the pairing.

BLUETOOTH FAILS TO CONNECT

• Make sure the scale, Bluetooth and GPS (Android only) on your phone are on. Check the system version of your smart phone, it must be iOS 8.0 or  higher/Android 6.0 higher.
• When bluetooth is succesfully connected the bluetooth icon will display on the scale and the word “Connected” will display on the app.
• If fail to connect via Bluetooth, please click Account > Device to find the scale ID: Aura Curve.

BODY FAT DATA NOT DISPLAYING

• Step onto the scale with bare feet.
• Make sure your feet and the scale are both dry.
• A full scale reading take about 20 -30 seconds. Please remain on the scale until the scale reads out all the data.
• Bluetooth might not be turned on.
• Bluetooth might be paired with a difference scale.

INCORRECT WEIGHT DATA

• Check whether the scale is on a hard, flat surface.
• Check each sensor foot on the back of the scale to make sure that nothing is stuck to the bottom of it.

INCORRECT MUSCLE – FAT RATIO

• The body parameter settings are incorrect, check to make sure you entered the correct gender, height, and age.
• Check if Athlete Mode is activated.

HOW TO RESET THE SCALE

• Step on the scale to turn it on. Let it automatically drop to 0.0kg to calibrate.

THE SCALE DOESN’T TURN ON

• Check if the insulation sheet has been pulled out.
• Check if the batteries have run out and change them if necessary.

FREQUENTLY ASKED QUESTIONS

How to get the most accurate result?

• Stand completely still on the scale.
• Weigh in at the same time each day to ensure the most accurate results. Ensure that the scale is placed on a hard flat surface.
• Check your profile information (gender, age, height) and make sure all the data is accurate.
• Ensure the scale legs are balanced
• Scale should display “0.0lb” prior to reading.
• Weigh in barefoot and make sure each foot is perfectly aligned with the scale electrode sensors.

How do I restart my scale?

• Remove the batteries.
• Reinsert the batteries and wait for 5 seconds.
• Your scale is now recalibrated and ready to use.

How do I change language?

• Fitdays APP > Account > Settings > Language

How do I change the measure units?

• Fitdays APP > Account > Settings > Switch unit
• For more information, please check FQA from Fitdays APP.
  Account > Settings > FAQ

Place the scale far away from children in case of falling or crashing.

Do not expose the scale to heat or fire, it can cause an explosion.

Waste electrical products should not be disposed of with household waste. Please recycle appropriately. Check with your local authority or retailer for recycling advice.

THANK YOU FOR PURCHASING THE AURA FULL BODY ANALYSIS SCALE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>