Salente SmartDust 3.1 Stick Vacuum Cleaner Instruction Manual

June 9, 2024
Salente

Salente SmartDust 3.1 Stick Vacuum Cleaner

Salente SmartDust 3.1 Stick Vacuum Cleaner

Vacuum cleaner components

Vacuum cleaner components

  1. Main unit
  2. Battery
  3. Extension tube
  4. Motorized floor brush
  5. Wall mount
  6. Long crevice nozzle
  7. Sofa brush nozzle
  8. Dusting brush nozzle
  9. Charger
  10. Carpet roller
  11. Hard-floor roller
  12. Water tank + mop

Charging methods

Note: Be sure to turn off the vacuum cleaner before charging it!
The display will automatically recognize when the appliance is charging!
To protect the battery, the appliance will automatically stop charging once fully charged. This means the charger can be connected to the power without damaging the battery

Charging methods
Charging methods

Using the vacuum cleaner

How to assemble the appliance

Using the vacuum cleaner

Which nozzle should I choose?

| | Which nozzle should I choose?
---|---|---
dusting brush| furniture nozzle| crevice nozzle
curtains, cornices, ventilation outlets, etc.| beds, sofas, bolsters, etc.| crevices, doorjambs, window frames, etc.

Vacuuming the floor – starting the cleaner

Charging methods

  1. Step on the floor brush and tilt back the vacuum cleaner to start cleaning.
  2. Squeeze the switch and press the upper button to lock the switch if necessary.
Smart display system

Charging methods

How to clean the dust cup

Emptying the dust cup

Switch off the vacuum cleaner before cleaning. Push the release button and empty the dust into a suitable waste bin. The vacuum cleaner can only be used after the dust cup has been re-closed.

How to clean the dust cup

Cleaning the filter system

How to clean the dust cup

  1. Switch off the vacuum cleaner before cleaning.
  2. Gently scrub with water or a neutral detergent. Wring out the cleaning cloth before scrubbing. Do not allow water to penetrate into the interior of the vacuum cleaner’s electrical component.
  3. After cleaning, take care not to place the cleaner in the sun or in a damp place.
  4. Pull the release ring and remove the dust cup. Rotate and remove the filters. They can now be cleaned.

Symbol

Important! The filter element and screen cannot be washed in a washing machine or dried using a hair dryer.
Attention! Do not use a brush while washing the filter element.
Scrub gently to avoid damaging the filter element. The filter element should be rinsed after washing.
Make sure it is dry before loading it back into the vacuum cleaner.

How to clean the floor brush

Dismantling the floor brush
  1. Make sure the vacuum cleaner is turned off.
  2. Dismantle the floor brush according to steps in the manual.
  3. Take off the brush cover from the top of the floor brush. Remove the roller to clean it.
    How to clean the floor brush
Putting back the floor-brush roller

Attention! When re-installing the roller in the floor brush, take care to ensure it is properly installed. Otherwise, the roller will not be able to move.

How to clean the floor brush

Troubleshooting

Attention! If you find that the vacuum cleaner is not working properly, ensure the vacuum cleaner is disconnected from the power supply before performing an inspection.

Trouble Cause Corrective action
The product does not work. Discharged battery Charge up the battery.
Aging battery Buy a new battery and replace the old one.
Motor failure Return the product to the retailer or aftersales for repair.
Vacuum cleaner cannot suck, or has low suction power. Blocked filter Wash

the filter. Dry before use to prevent bacteria from breeding.
Full dust cup| Empty the dust cup.
Incorrectly installed dust cup| Install the dust cup correctly.
Blocked floor-brush roller| Clean the floor-brush roller.
Filter used too long| Buy new filter and replace old one every six months.
Floor-brush roller stops working during vacuuming.| Blocked floor-brush roller| Clean the floor-brush roller.
Battery cannot be charged.|  |
 | Poor contact of the charging contacts on the charging base| Reposition the charging contact by hand.
The charging indicator does not light up.| The circuit inside the charging base is damaged.| Return the product to the retailer or aftersales for repair.
 | Charging base is not plugged into the socket.| Check the adaptor power cord whether it is plugged into the socket.
Odor comes from the air outlet of the vacuum cleaner.| Filter is dirty.| Wash the filter. Dry before use to prevent bacteria from breeding.
 |  | Buy a new filter.
Vacuum cleaner has a plastic smell| New product| The plastic smell will fade after using the product for a while.

Warnings and precautions

Please read all safety instructions below and follow all general safety measures before use. Any non-compliant operation may cause damage to the product.

  • Do not use the appliance to pick up high-temperature dirt (matches, cigarette ends, hot ashes, or any hot objects), micro dust (lime, cement, fine sawdust, plaster, ashes, carbon dust), large sharp objects (broken glass, nails, pins), dangerous objects, chemical substances, or flammable liquids.
  • Please keep the air outlet of appliance away from hair, loose clothing, fingers or other parts of the body. Do not point the suction tube, extension tube, or other nozzle at the eyes and ears, or put it in the mouth.
  • If large pieces of paper, paper balls, plastic sheets or sharp objects are lying on the surface to be cleaned, or there is anything thicker than a drinking straw, please remove such objects in advance to prevent the suction tube from becoming blocked and affecting the use of the product.
  • During use, if there is any electrical discharge, high motor temperature, or abnormal sounds, e.g. a component seems excessively hot, there is a strange sound and smell, or weak suction, stop using the appliance at once.
  • Check the dust cup regularly. If the dust cup is full, please empty it in time. Keep the air outlet unblocked to avoid loss of suction power and motor heating – this may lead to the reduction of vacuum cleaner service life.
  • Regularly check to ensure the extension tube is unblocked. If there is a blockage, please remove in time to avoid any reduction in suction and performance.
  • When cleaning the appliance, do not use lubricants, abrasives, or polish to clean any part. Please call our customer service department for help if the appliance malfunctions. Do not repair by yourself.
  • Check the dust cup regularly. If the dust cup is full, please empty it in time. Keep the air outlet unblocked to avoid loss of suction power and motor heating – this may lead to the reduction of vacuum cleaner service life.
  • Regularly check to ensure the extension tube is unblocked. If there is a blockage, please remove in time to avoid any reduction in suction and performance.
  • When cleaning the appliance, do not use lubricants, abrasives, or polish to clean any part. Please call our customer service department for help if the appliance malfunctions. Do not repair by yourself.

The plug must be removed from the socket before cleaning or maintaining the appliance.
The appliance must only be used with the power supply unit provided with the appliance.

The battery must be removed from the appliance before the appliance is scrapped. The appliance must be disconnected from the mains when removing the battery. Take out the battery pack by holding the vacuum cleaner handle with the right hand and pressing the battery pack release button with the left. Pull out the battery pack. The battery must be disposed of safely.

Disposal: If the product literature, packaging, or labelling contains the symbol of a crossed-out wheelie bin, this means that – in the European Union – all electrical and electronic products, batteries, and accumulators so marked must be placed into separate waste containers at the end of their working life. Do not throw away these products into unsorted municipal waste.

Power supply information
Information Value Unit Notes
Manufacturer’s name or trade mark, commercial registration number and address

Changzhou Taiyu Electric Co., Ltd 320404000021771 10 Fulin Road, Zhonglou District, Changzhou, China| –| –
Model identifier| TYGSDC4200500| –| –
Input voltage| 100–240 V| V| Specified by the manufacturer. Shall be a value or a range.
Input AC frequency| 50/60 Hz| Hz| Specified by the manufacturer. Shall be a value or a range.
Output voltage| 42 V| V| Nameplate output voltage. Shall indicate whether it is AC or DC.
In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage – Output current – Output power shall be published.
Output current| 0.5 A| A| Nameplate output current.
In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage – Output current – Outpt power shall be published.
Output power| 21 W| W| Nameplate output power.
In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage – Output current – Output power shall be published.
Average active efficiency| 88.14%| %| Declared by the manufacturer based on the value calculated as the arithmetical mean of efficiency at load conditions 1–4.
In cases where multiple average active efficiencies are declared for multiple output voltages available at load condition 1, the value published shall be the average active efficiency declared for the lowest output voltage.
Efficiency at low load (10%)| 77.86%| %| Declared by the manufacturer based on the value calculated at load condition 5.
External power supplies with a nameplate output power of 10 W or less shall be exempted from this requirement.
In cases where multiple average active efficiencies are declared for multiple output voltages available at load condition 1, the value published shall be the value declared for the lowest output voltage.
No-load power consumption| 0.074 W| W| Declared by the manufacturer based on the value measured for load condition 6.

DECLARATION OF CONFORMITY

The company Abacus Electric, s.r.o. declares that the SALENTE SmartDust 3.1 is in compliance with the requirements of the standards and regulations relevant for the given type of device. Find the complete text of the Declaration of Conformity at ftp://ftp.salente.cz/ce

Importer

Abacus Electric, s.r.o.
Planá 2, 370 01, Czech Republic

Manufacturer

Naxya Limited
No.5, 17/F, Strand 50, 50 Bonham Strand, Sheung Wan, Hong Kong
Made in China
Copyright © Abacus Electric, s.r.o.
www.salente.eu
All rights reserved.
The design and specifications may be changed without prior notice.Salente
Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals