Salente ProVacs Industrial Multi Purpose Vacuum Instructions

Salento ProVacs Industrial Multi-Purpose Vacuum

Product Information

Specifications:

• Model: ProVacs
• Version/Date: 1 / 24.6.2024
• Languages: CZ, SK, EN, HU, RO, DE, IT, SI
• Noise Emission: 72 dB(A)
• Electric Shock Protection: Class II

Product Usage Instructions

Introduction
Welcome to the Salento family! To ensure the appliance’s safety during transport, please follow the instructions provided in this manual.

Safety Warnings and Instructions

• Store the appliance safely to protect it.
• Never tamper with any component that might switch the appliance on automatically.
• Avoid using damaged accessories.
• Repairs should only be done by authorized service centers.
• Keep the appliance away from children under 8 years old.

Description of Individual Parts

A:

• 1. Flexible vacuum hose
• 2. Handle
• 3. Cable holder

B:

• 1. Lid latch
• 2. Filter cage

Before First Use

1. Remove any protective stickers or films on the appliance.
2. Inspect the appliance for any damage before connecting it to the mains.

Vacuum Cleaner Assembly

1. Ensure the vacuum cleaner is not connected to the mains before assembly.
2. Follow the steps to assemble components like the lid latch, top cover, handle, etc., as per the manual.

Dry Draining

Warning: Always use dry vacuum filters when dry vacuuming to prevent engine damage.

1. Place a paper dust bag over the container opening.
2. Attach the textile filter bag to the filter cage.

INTRODUCTION

WELCOME TO THE SALENTE FAMILY

• Before putting this product into operation, please read this entire user manual carefully through to the end, even if you are familiar with the use of a similar type of product in the past.
• Keep this user manual for future reference – it is an integral part of the product and may contain important instructions on commissioning, operation, and care of the product.
• Make sure that other people who will be using this appliance read this user manual.
• If you give, donate, or sell this appliance to others, please give them this user manual together with this product and remind them to read it.
• During the warranty period, we recommend keeping the original packaging of the product -this will protect the appliance in the best possible way during transport.

THE MOST UP-TO-DATE VERSION OF THE USER MANUAL
Due to Salente’s ongoing product innovations and changes in legislation, you can always find the most up-to-date version of this user manual on the website www.salente.eu or by simply scanning the QR code shown below with your mobile phone:

SAFETY WARNINGS AND INSTRUCTIONS

General notices:

• Use the appliance only as specified in this user manual.
• This appliance may be used by children aged 8 years or older and persons with reduced physical, sensory, or mental abilities or lack of experience and knowledge, provided they are supervised or have been instructed in the safe use of the appliance and understand the potential hazards.
• Unpack the appliance carefully, taking care not to throw away any of the packaging material before you have found all the components of the product.
• Remove all packaging and marketing materials from the product before first use.
• If the appliance is to be used around children, please take extra care. Always place the appliance out of their reach. Children should be supervised to ensure that they do not play with the product.
• Do not allow the appliance to be used as a toy.
• Do not shake the product and make sure it does not fall to the ground.
• Do not touch the appliance wwetdamp hands. This is especially true when connected to a power outlet. Do not attempt to remove the outer casing of the appliance.
• The manufacturer is not liable for any damage caused by improper use of the appliance and its accessories.
• It is forbidden to modify the surface of the appliance in any way, e.g. by using self-adhesive film, spraying its surface, painting it with paint, etc.

Appliance location:

• Always install the appliance in a horizontal, hard, smooth, dry, and stable place.
• Never place the appliance on inclined surfaces.
• Use and store the appliance away from explosive gases, flammable, combustible, and volatile substances (solvents, varnishes, adhesives, etc.).
• Do not expose the appliance to extreme temperatures, direct sunlight, excessive humidity (e.g. bathroom, sauna, swimming pool, etc.), or place it in excessively dusty environments.
• Do not place the appliance near heaters, open flames or other appliances or equipment that are sources of heat.
• Do not use the appliance within the range of a strong electromagnetic field (e.g. microwave oven).
• Do not place the appliance or its accessories on or near an electric or gas cooker or on the edge of a table or kitchen worktop.
• Do not expose the appliance to dripping or splashing water. Do not sprayor rinse it with water or any other liquid. Do not immerse it in water or any other liquid, even partially.
• Do not use the appliance to store objects and ensure that no other objects are placed on the appliance when storing it.

Purpose of the appliance:

• The appliance is designed for use in homes, offices, and similar areas. Do not use it for commercial, medical, or other purposes.
• Do not use the appliance for purposes other than those for which it is intended.
• The appliance is not designed for continuous operation.
• The appliance is designed for indoor use, do not use it outdoors.
• Do not use this appliance with a programmer, timer, remote control system, or any other component that would automatically switch the appliance on.

Accessories:

• Never use accessories that are not supplied with or intended for this product.
• Before each use, make sure that the selected accessory is not damaged. Never use the appliance with damaged accessories.

Damage and repair of the appliance:
Any repairs may only be carried out by an authorised service centre.

• Never repair the appliance yourself and do not make any adjustments to it! Entrust all repairs and adjustments to this product to a professional company/service. Tampering with the product while the warranty is in effect puts you at risk of losing warranty benefits.
• Never use the appliance if it is not working properly, if it has fallen on the ground and become damaged, or if it has fallen into the water. In this case, have it repaired by a professional company/service.
• If the appliance falls into water, do not use it under any circumstances and hand it over to an aauthorizedservice ccenterfor inspection.

Appliance maintenance and cleaning:

• Keep the appliance clean. When cleaning, follow the instructions in the Cleaning and Maintenance chapter.
• Cleaning and maintenance by the user must not be carried out by children unless they are at least 8 years old and supervised. Children under 8 years of age must stay away from the product.

Power supply:

• Before connecting the appliance to the main socket, make sure that the voltage on the rating plate matches the voltage at your main socket.
• Do not connect the appliance to the main socket unless it is properly assembled.
• The main mainsocket must be freely accessible so that the mains cable can be quickly disconnected from the power source if necessary.
• Fully unwind the power cord before using the product.
• Do not wrap the power cord around the product.
• Do not connect or disconnect the power cord of the appliance from the power outlet with wet hands.
• Make sure that neither the power cord fork nor the power cord comes into contact with moisture, water, or other liquids. If this still happens, dry the fork carefully before using it again.
• Keep the power cord dry.
• Do not pull or carry the appliance by the power cord.
• Do not disconnect the appliance from the main socket by pulling the power cord. The power cord or power outlet could be damaged. Disconnect the power cord from the main socket by pulling the plug.
• Do not place heavy objects on the power cord.
• Make sure that the power cord does not hang over the edge of the table or touch hot surfaces or sharp objects.
• Do not cover the mainscable with the carpet. Do not place carpets, skirting boards, or other coverings on the main cable. Do not place the main cable under furniture or appliances. Place the mains cable where it cannot be run over or tripped over. If this happens, unplug the appliance immediately.
• Always clean the power cable with a dry cloth only, never wash it with water.
• Always switch off and unplug the appliance when not in use, when left unattended, and before cleaning, maintenance, or storage.
• Only connect the appliance to a properly earthed mains socket.
• Do not plug the appliance into an extension cord.
• Do not adjustthee length ofthe powerr cable.
• If the power cable is damaged, have it replaced by a qualified service center to avoid a dangerous situation.?It is forbidden to use the appliance with a damaged power cord.
• In the event of a storm, the appliance must be switched off and its power cord unplugged from the main socket to prevent damage in the event of a lightning strike.
• Switch off the appliance and disconnect the power cord from the main socket if it makes a strange noise or ifitemitsan an odour or smoke.
• The appliance is equipped with castors. Take extra care when handling it, e.g. to prevent it from falling down stairs or sliding off a sloping surface.

NOISE: The declared noise emission value of this appliance is 72 dB(A), which is the A sound power level relative to a reference sound power of 1 pW.

PACKAGING CONTENT

• Vacuum cleaner
• Flexible vacuum hose
• Plastic vacuum tubes (3 pcs)
• Floor nozzle
• Štěrbinová hubice
• Paper dust bag
• Textile filter bag
• Foam filter
• HEPA filter
• Handle
• HEPA filter flap
• Rolling castors (4 pcs)
• Mounting screws (6 pcs)
• Operating Instructions

SPECIFICATIONS

• Rated power input: 1000 W
• Rated voltage: AC 220-240 V
• Rated frequency: 50/60 Hz

DEGREE OF PROTECTION AGAINST ELECTRIC SHOCK: Class II – Protection against electric shock is provided by double or reinforced insulation.

DESCRIPTION OF INDIVIDUAL PARTS

1. Flexible vacuum hose

2. Handle

3. Cable holder

4. Main switch

5. Top cover with motor

6. Flexible hose connection inlet

7. Dust and water container

8. Running wheels with caps

9. Air outlet for blower

10. Vacuum tube (3x)

11. Lid latches (on both sides of the vacuum cleaner)

12. Floor nozzle

13. HEPA filtr

14. Paper dust bag

15. Foam filter

16. Textile filter bag

17. Štěrbinová hubice

18. HEPA filter flap

19. Lid latch

20. Filter cage

BEFORE FIRST USE

1. Check the product for protective stickers, films or other materials intended only for transport to the customer to protect the appliance from scratches or other damage. Remove such before use.
2. Before connecting to the mains, ensure by visual inspection that the appliance is intact and no damage has occurred during transportation.

VACUUM CLEANER ASSEMBLY

1. Before starting to assemble the vacuum cleaner, make sure that the vacuum cleaner is not connected to the mains.
2. On both sides of the A11 lid latch by flipping them out.
3. Lift the top cover with the A5 engine and remove the contents of all accessories from inside the tank.
4. Turn the tank upside down and slide the castors and their A8 caps into their four positions in the base and screw them in with the supplied Phillips head screws.
5. Screw the A2 handle onto the tank using the two screws provided with a Phillips screwdriver.

**DRY DRAINING

**

WARNING : When dry vacuuming, it is always necessary to fit at least one of the supplied dry vacuum filters (see below).

Three filters for dry vacuuming are included:

• paper dust bag A14
• textile filter bag A16
• HEPA filter A13

Cautions and tips for proper use and vacuuming:

• For indoor vacuuming or for vacuuming fine dust, it is advisable to fit an A14 paper dust bag and an A13 HEPA filter.
• For vacuuming coarser dirt or for example for work in the workshop or outdoors, it is advisable to fit the A16 textile dust bag.
• The dust bags or HEPA filter must be completely dry when vacuuming dry dust, as a wet or damp bag will quickly become clogged and fail to perform its function.
• Check the filter bags and the HEPA filter carefully and regularly to make sure they are not punctured. Never use them with holes or cracks as this can cause engine damage and void the warranty.

1. Place an A14 paper dust bag (see Figure 1) over the opening on the inside of the container.
2. The textile filter bag A16 is put on the filter cage B2. Pull the bag up to the top of the filter cage (see Figure 2) and make sure there is no gap for dust to enter the engine.
3. HEPA filter A13 is mounted on the filter cage B2. Slide the filter up to the top of the filter cage (see Fig. 3). The filter must be fixed with the locking lid A18 by turning it according to the arrows marked on the lid.
4. Place the top cover with motor A5 back on the container A7 and secure with the locks A11 against the latches B1.
5. Connect the suction hose A1 to the suction inlet A6 on the front of the tank and fold and fit the three parts of the suction tube A10 to the end of the hose.
6. Put on any of the required accessories according to the type of vacuuming:
   • Floor nozzle A12
   • Gravel nozzle A17
7. When you have finished vacuuming, switch switch A3 to position “0” and disconnect the power cord from the socket.

BLUE BROADCASTING

WARNING :

• Do not vacuum solvents, explosives, flammable and/or hazardous liquids such as gasoline, oil, spirits, paints, thinners, acids, etc. Using the wrong filter will void the warranty.
• The tank is not designed for liquid storage. Always empty the vacuum cleaner of liquid after use.
• Before wet vacuuming it is necessary to remove the filters for dry vacuuming, including the HEPA filter, and fit the A15 foam filter for wet vacuuming. Using the wrong filter will void the warranty.

For wet vacuuming, the A15 foam filter must be used :

1. Before using the foam filter, first remove any fitted paper dust bag A14, cloth filter bag A16 and HEPA filter A13.
2. Make sure the foam filter is clean and dry.
3. Slide the foam filter onto the filter cage B2. Slide the filter up to the top of the filter cage (see Figure 4) and make sure there is no gap for dust to enter the engine.

If you want to suck a large amount of liquid from a sink or tank etc., do not immerse the nozzle completely in the liquid. Leave a gap at the top of the nozzle opening to allow air to enter. The vacuum cleaner is equipped with a float valve that blocks the suction action when the tank reaches its maximum capacity. The user will notice an increase in engine noise. When this happens, turn off the vacuum cleaner, disconnect it from the power supply, remove the top from the tank and empty the liquid into a suitable container or drain. To continue vacuuming, reattach the head and continue.

FUNCTIONS OF FUKAR

The vacuum cleaner can also be used as a blower for blowing dust, leaves, air filters, etc. By connecting the vacuum hose A1 to the air outlet A9 at the rear of the vacuum cleaner, the air is blown outwards from the vacuum cleaner. By connecting the A17 slotted nozzle, you can better direct the airflow.

CLEANING AND MAINTENANCE

WARNING : Never immerse the appliance in water, clean it under running water or put it in the dishwasher.

• Use a soft cloth dampened with lukewarm water to clean the outside of the appliance. Do not use harsh cleaning agents, thinners or solvents, otherwise the surface of the appliance may be damaged.
• Take special care when cleaning the plastic parts of the appliance, which are more susceptible to scratches.
• Always switch off and unplug the appliance and allow it to cool for at least 30 minutes before any cleaning.

Never rinse the appliance or its power cord under water or immerse it in water.

Disposal: If the information leaflet, packaging or product label contains a crossed-out bin symbol, this means that in the European Union all electrical and electronic products, batteries and accumulators marked in this way must be placed in separate waste containers at the end of their life. Do not dispose of these products in unsorted municipal waste.

DECLARATION OF CONFORMITY
Abacus Electric, s.r.o. hereby declares that the SALENTE ProVacs product meets the requirements of the standards and regulations applicable to this type of equipment. The full text of the Declaration of Conformity can be found at http://ftp.salente.cz/ce.

Importer / Manufacturer
Abacus Electric, s.r.o. Planá 2, 370 01, Czech Republic  Made in P.R.C., Copyright © Abacus Electric, s.r.o., www.salente.eu All rights reserved. Design and appearance are subject to change without notice.

FAQ

Q: Where can I find the most up-to-date version of the user manual?
A: You can find the latest version of the user manual on the website www.salente.eu or by scanning the QR code with your mobile phone.

Q: What should I do if the appliance is damaged?
A: If the appliance is damaged, do not use it. Contact an authorized service center for repairs.

References

• Index of /ce
• Salente - Every day lighter, every moment more precious.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>