Sea Gull Lighting 6025 Brentwood Outdoor Pendant Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
6025 Brentwood Outdoor Pendant
Instruction Manual 
NEED HELP?
Installation Instructions for
Brentwood Outdoor Pendant
990P6025-BRE
1.0 6025
6025 Brentwood Outdoor Pendant
STOP
If you need installation assistance, replacement parts, or have questions
regarding our warranty, please call our customer care center:
1-800-347-5483
To register your fixture, please visit our website:
www.SeaGullLighting.com
SAVE THESE INSTRUCTIONS!
GENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
This product may be dimmed using a standard incandescent dimmer.
CAUTION RISK OF FIRE
– This product requires installation by a qualified electrician.
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under normal conditions of use, are warranted to be free from defects in materials and workmanship for one year from date of sale. LED light sources are warranted for five years. ENERGY STAR ® labeled products are warranted for three years. Sea Gull Lighting at its sole option will repair or replace, F.O.B. Factory, freight prepaid, any Sea Gull Lighting product defective in materials or workmanship. Such replacement is the exclusive remedy against Sea Gull Lighting should any of the products delivered prove defective. Invoices for labor charges and/or charge backs for labor will be denied unless prior written approval is given. Any modification to a Sea Gull Lighting product not made at the factory will void the or UL ETL listing as well as the Sea Gull Lighting warranty policy. To register your fixture, please visit our website: SeaGullLighting.com
Install the Fixture
- If necessary, screw the shorter end of the threaded nipple tightly onto the mounting plate.
- Secure the mounting plate to the junction box.
- Screw the screw collar tightly onto the threaded nipple.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
- Install the provided tape to the ends of the glass, insert the glass into frame, and secure it by ensuring that the tape properly sticks onto the frame.
- Install the frame to the fixture and secure it in place with the frame screws.
- Determine the wanted height of the fixture and remove a portion of the chain by opening a link and removing it from the bottom.
- Feed the fixture wires through the fixture loop and screw the fixture loop onto the fixture.
- Install the canopy and the collar nut onto the chain (in that order), then install the open link onto the fixture loop and secure it in place by closing the link.
- Weave the cord through the chain, screw collar, canopy, threaded nipple, and out of the junction box. Trim the cord leaving enough to make electrical connections.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut tightly onto the screw collar.
7400 Linder Ave, Skokie, IL 60077
800.323.3226 – 847.626.6300
www.SeaGullLighting.com
© 2016 Sea Gull Lighting.All rights reserved.
The “Sea Gull Lighting” graphic is a registered trademark of Sea Gull
Lighting.
Sea Gull Lighting reserves the right to change specifications for product
improvements without notification.
A Generation Brands Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>