Sea Gull Lighting 84049 Yorktown Outdoor Wall Light Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
Installation Instructions for
Yorktown Outdoor Wall
84049, 84049P, 84050, 84050P
Instruction Manual
ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for wet locations.
Incandescent version may be dimmed with a LED standard incandescent dimmer.
version may be dimmed with a LED dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
CAUTION -RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and Use minimum 90°c supply
conductors.
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under
normal conditions of use, are warranted to be free from defects in materials
and
workmanship for one year from date of sale. LED light sources are warranted
for five years. ENERGY STAR® labeled products are warranted for three years.
Sea Gull Lighting at its sole option will repair or replace, F.O.B. Factory,
freight prepaid, any Sea Gull Lighting product defective in materials or
workmanship.
Such replacement is the exclusive remedy against Sea Gull Lighting should any
of the products delivered prove defective. Invoices for labor charges and/or
charge backs for labor will be denied unless prior written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will
void the UL or ETL listing as well as the Sea Gull Lighting warranty policy.
To register your fixture, please visit our website:
SeaGullLighting.com
Install the Fixture
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Neatly place the wires into the junction box, mount the fixture base onto the mounting plate studs, and secure it with the two cap nuts.
- Screw the lamp into socket. Refer to the label on the socket for Max Wattage Information.
- Install the shade to the fixture using the shade cap nuts.
- Caulk around the base of the fixture with waterproof construction sealant.
STOP NEED HELP?
NECESITA AYUDA?
If you need installation assistance, replacement parts, or have questions
regarding our warranty, please call our customer care center:
1-800-347-5483
To register your fixture, please visit our website:
www.SeaGullLighting.com
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077
800.323.3226 – 847.626.6300
www.SeaGullLighting.com
© 2017 Sea Gull Lighting.All rights reserved.The “Sea Gull Lighting” graphic
is a registered trademark of Sea Gull Lighting. Sea Gull Lighting reserves the
right to change specifications for product improvements without notification.
A Generation Brands Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>