Sea Gull Lighting 77046 Westminster Small Two Light Semi-Flush Convertible Pendant Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
77046 Westminster Small Two Light Semi-Flush Convertible Pendant
Instruction Manual
77046 Westminster Small Two Light Semi-Flush Convertible Pendant
STOP
NEED HELP?
If you need installation assistance, replacement parts, or have questions
regarding our warranty, please call our customer care center:
1-800-347-5483
To register your fixture, please visit our website:
www.SeaGullLighting.com
SAVETHESE INSTRUCTIONS!
ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under
normal conditions of use, are warranted to be free from defects in materials
and workmanship for one year from date of sale. LED light sources are
warranted for five years. ENERGY STAR® labeled products are warranted for
three years. Sea Gull Lighting at its sole option will repair or replace,
F.O.B. Factory, freight prepaid, any Sea Gull Lighting product defective in
materials or workmanship. Such replacement is the exclusive remedy against Sea
Gull Lighting should any of the products delivered prove defective. Invoices
for labor charges and/or charge backs for labor will be denied unless prior
written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will
void the UL or ETL listing as well as the Sea Gull Lighting warranty policy.
To register your fixture, please visit our website:
SeaGullLighting.com
Install the Fixture
NOTE: Due to the complexity of this fixture, assistance will be needed for installation.
- Secure the mounting plate to the electrical box with two mounting plate screws.
- FOR SEMI-FLUSH MOUNT ONLY: Unscrew the chain hub loop inside the chain hub canopy and remove the ball nut bolts by unscrewing the ball nuts. SKIP TO STEP 6
- Determine the wanted height of the fixture and remove a portion of the chain by opening a link.
- Open the links on both ends of the chain and attach it to the chain hub loop and the canopy, then close the links.
- Weave the cord through the chain and trim the cord leaving enough to make electrical connections. Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and rigid tracer) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and smooth tracer) to the hot power line wire with a wire nut.
- Align then place the canopy onto the mounting plate studs and secure it with the two ball nuts.
- Install the candle tubes and screw the lamps into the socket.
- Gently place the shade into the shade base and secure them to the fixture by hooking the chains onto the chain hub canopy.
7400 Linder Ave, Skokie, IL 60077
800.323.3226 – 847.626.6300
www.SeaGullLighting.com
© 2015 Sea Gull Lighting.All rights reserved.The “Sea Gull Lighting” graphic
is a registered trademark of Sea Gull Lighting. Sea Gull Lighting reserves the
right to
change specifications for product improvements without notification.
A Generation Brands Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>