Sea Gull Lighting 6640504 Chatauqua 4 Light Island Light Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 6640504 Chatauqua 4 Light Island Light Instruction
Manual
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer.
LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
NEED HELP?
If you need installation assistance, replacement parts, or have questions regarding our warranty, please call our customer care center:
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under
normal conditions of use, are warranted to be free from defects in materials
and
workmanship for one year from date of sale. LED light sources are warranted
for five years. ENERGY STAR® labeled products are warranted for three years.
Sea Gull Lighting at its sole option will repair or replace, F.O.B. Factory,
freight prepaid, any Sea Gull Lighting product defective in materials or
workmanship.
Such replacement is the exclusive remedy against Sea Gull Lighting should any
of the products delivered prove defective. Invoices for labor charges and/or
charge backs for labor will be denied unless prior written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will
void the UL or ETL listing as well as the Sea Gull Lighting warranty policy.
To register your fixture, please visit our website:
SeaGullLighting.com
Install the Fixture
- Determine the wanted height or look of the fixture with the provided stems and assemble them by screwing them together. All the parts may be used alone or used in combination.
- Feed the fixture wires through the stem assemblies and screw the assemblies to the top of the fixture.
- Feed the fixture wires through the swivels and screw the swivels to the stem assemblies.
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the canopy onto the mounting plate studs, and secure it in place by screwing the cap nuts onto the studs.
- Place the shade and spacer over the socket, then secure them in place by screwing the shade collar nut onto the socket. Repeat for remaining shades.
- Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
7400 Linder Ave, Skokie, IL 60077
800.323.3226 – 847.626.6300
www.SeaGuIILighting.com
© 2017 Sea Gull Lighting.All rights reserved. The “Sea Gull Lighting” graphic
is a registered trademark of Sea Gull Lighting. Sea Gull Lighting reserves the
right to change specifications for product improvements without notification.
A Generation Brands Company
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>