Baseus Bowie D03 Wireless Headphones User Manual
- June 9, 2024
- Baseus
Table of Contents
Baseus Bowie D03 Wireless Headphones
Pairing
-
Power-on
When powering on the device for the first time, press and hold the multifunction button for 2s. At this time, the red and white indicators blink quickly, and the device enters the wireless pairing mode. -
Wireless connection
Turn on the wireless function of the mobile phone to enter the search and pairing state. Select the device model: Baseus Bowie D03 -
Power-off
Press and hold the multifunction button for 4s to power off the headphones.
Instructions
Music mode
Play/Pause:Press the multifunction button.
Previous: Press and hold the volume- button for 1.5s.
Next: Press and hold the volume+ button for 1.5s.
Volume-: Press the volume- button.
Volume+: Press the volume+ button.”
Low-latency mode: Double-press the multifunction button
Activate the voice assistant: Triple-press the multifunction key.
Call mode
Answer/hang up a call: Press the multifunction button.
Reject a call: Press and hold the multifunction button for 1.5s.
Charging power indicator
During charging: The power indicator is steady on red.
Fully charged: The power indicator is steady on white
Restore to default settings
Turn on the earphones, press the + button and – button for 4s at the same time, the indicator flashes red for 3 times, meaning it’s successful.
Warnings
Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- This product contains battery inside. Please avoid exposing the product to the sunlight, electric heater or similar overheating environments. Do not store the product in high temperature, strong light and strong magnetic places.
- Do NOT keep it in other harsh environments such as nearby the fire source. Intense physical actions such as knocking, throwing, trampling on squeezing, or putting into fire shall be avoided. Do not use it in case of expansion
- The ambient temperature of product is 0-45℃ .
- Inappropriate use of the product against this user manual or ignoring warnings can easily cause damage to the product or may endanger personal and property safety. Consumers shall bear for all the consequences, to which our company will not assume any legal liability.
- Decomposition of this product by non-professionals is strictly prohibited. Otherwise, it may cause a fire or damage the product.
- Do NOT use a load (electrical appliances) that exceeds the output current of this product. A circuit protection mechanism is built-in to automatically stop working if loads exceed.
- Do NOT put this product in water (or washing machine). If water enters the product, let it dry naturally before using it.
Content
Headphones x 1
| Charging cable x 1| User manual x 1| Warranty card x 1|
AUX cable x 1
---|---|---|---|---
Specifications
| Name: | Baseus Wireless Headphones |
|---|---|
| Model No.: | Baseus Bowie D03 |
| Material: | ABS+PC+metal |
| Wireless version: | V5.3 |
| Communication distance: | 10m |
| Music playing time: | 30 hours (volume at 70%) |
| Battery capacity: | 300mAh/1.11Wh |
| Rated input: | DC5V⎓170mA |
| Rated consumption current: | 17mA |
| Fully charging time: | About 2 hours |
| Frequency response range: | 20Hz to 20kHz |
| Charge interface: | Type-C |
| Application scope: | Playback devices with wireless functions |
*The above data sources are measured values from the Baseus laboratory, but the data may be different or inaccurate due to changes in the actual environment.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
Part Description
| Toxic or hazardous substances and elements
---|---
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr VI)|
Polybrominated biphenyls (PBB)|
Polybrominated diphenyl ethers (PBDE)
PCB
| Ｘ| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ
Plastic| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ|
Ｏ
Accessory
| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ
| Ｘ| O| O| O| O|
O
This form is prepared in accordance with SJ/T 11364 regulations.
O: Indicates that contents of the toxic and hazardous substances in all
homogeneous materials are below the limit requirements specified by GB/
T 26572 standard.
X: Indicates that contents of the toxic and hazardous substances exceed
the limit requirements specified by GB/T 26572 standard in at least one
homogeneous material of the component.
This product complies with EU RoHS 2.0 Directive(2011/65/EU).
Warm Tip: The 5-year icon refers to the “valid environment-friendly use
period,” not the product quality assurance period. Electronic products contain
toxic and harmful substances such as lead, mercury, and cadmium. The overdue
use of these products may lead to leakage or mutation of these toxic and
harmful substances, cause environmental pollution, or severe damage to people
and property. The term “environment friendly use period” means that all
electronic products shall be used within this validity period. We are free of
any responsibility against safety issues caused by using the product beyond
its safe service life.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Customer Support
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou
Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB4943.1
Hotline: +86-4000-712-711 Website:www.baseus.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>