BASS JAXX SP-0201 Stadium Wireless Speaker Instruction Manual
- June 9, 2024
- BASS JAXX
Table of Contents
Instruction Manual
Thank you fa purchasing the Studlum Wayless Speaker. TT is manual provides more information about this wireless speaker. please read too instructions before using.
Product Overview
Package Contents
1(One) Wireless Speaker 5.7 in. x 5.7 in. x 5.1 in. (14.5cm x 14.5 cm x 13 cm)
1(One) Charging Cable 19.7In. (50cm)
1(One) Instruction Manual
Power On/Off
Power on
Slide the ON/OFF switch to the ION” position.
Power off Slide the ON/OFF switch to the -OFF’ position.
Pair Wireless speaker with your mobile device
- Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
- Power on the wireless speaker.
- Activate the Bluetooth function on your phone within range and select -13T STADIUM SPEAKER” from the list shown.
- You will hear a beep sound when pairing is successful.
Reconnect Wireless speaker to your mobile device
When powered on, the wireless speaker will automatically connect with the
last successfully paired device.
Charging your Wireless speaker
- Use the Micro USB charging cable provided with this wireless speaker.
- Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charr.
- The light will turn red while charging and will turn off once fully charged.
NOTE:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Wireless speaker if it has been not used for more than 6 months.
Technical Specification
Driver Diameter: 52 mm
Impedance: 4 Ohms
Power Supply: Li-ion
Battery 3.7V 300 rnAh
Playtime: 1.5-2 Hours
Charging lime. 1.5-2 Hours
Bluetooth Range: 32.8 Feet
Micro USB Charging Cable Included
FAQ
• If the Wireless speaker cannot be paired with your device, please try the
following:
– Ensure that your speaker is in pairing mode or reconnection mode. Ensure
that Bluetooth search function of your mobile device is activated.
• If the Wireless speaker cannot be recharged:
– If you use a power outlet, ensure that the power supply is connected
securely and the outlet works. If you use a computer, ensure that it is
connected and the USB port is powered.
Safety instructions for the lithium battery and charging the product
-The input voltage to the product is DC 5V 1A.
-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product
-Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.
– Do not heat above 70 deg °C1158 deg °F, eg. Do not expose to sunlight or
throw into fire.
-Switch off the product after use
-Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. RF warning statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
FCC ID: 2ADM5-SP-0201 Item# SP-0201
Class 1 LED product
Keep All Relevant Information for Future Reference
Made In China Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200
Philadelphia, PA 19106
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>