SinoTrack ST-903 GPS TRACKER User Manual

SinoTrack GPS TRACKER
USER MANUAL

PREFACE
Thank you for purchasing the SinoTrack GPS tracker. This manual shows how to operate the device smoothly in detail, please make sure to read this manual carefully before using the device. Please be noted that any update of the manual is made without prior notice. Each time the update of the manual will be released in the latest product sales. The manufacturer won’t assume any legal responsibility for any errors or omissions made in this manual.

SUMMARY

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS, APP, and the Internet. It adopts the most advanced technology of GPS and AGPS dual positioning.

ST-904:783822mm
Weight| ST-903:56g
ST-904:75g
Network| GSM/GPRS
Band| 850/900/1800/1900Mhz
GPS sensitivity| -159dBm
GPS accuracy| 5m
Battery| ST-903:3.7V 1050mAh battery
ST-904:3.7V 1500mAh battery
Stand by| 15-20 days
Storage Temp.| -40°C to +85°C
Operation Temp.| -20°C to +55°C
Humidity| 5%–95% non-condensing
Car charger| 12-24V    input   ; 5V-1A     output
Wall charger| 110-220V   input ; 5V-1A      output

Hardware Description

1. Speaker
2. Indicator Light
3. SOS Button
4. MIC
5. SIM Card Slot
6. USB Charger Slot

Note: GSM SIM CARD INSTALLATION GUIDE:
Only a GSM SIM card works in this model If you use a 3G or 4G card, please confirm it should have a GSM function. Please confirm the SIM Card without a PIN Code.

TURN ON THE DEVICE

• Open the rubber cover; insert the SIM card (chip up) into the slot.
• The indicator light is on when the SIM card is inserted.
•  The device gets GPS location when there is a GPS signal and gets LBS location when there is no GPS signal.
• The device automatically turns off when the SIM card is removed.

SMS TRACKING

Note: The yellow space is a blank in the SMS command.
4.1. Call the SIM card phone number in the tracker, you will receive a Google Maps link of position,or send the message “6690000” to the SIM card phone number in the tracker. E.g:

http://maps.google.com/maps?

4.2. Admin number setting (After admin number setting, all SMS operations to the device are under this number only.)
Command: phone number+password 1（This phone number is your own mobile phone number, not the SIM card number in tracker . ）
Reply: SET OK!
E.g: 132657901800000 1

Voice Monitor:
Send command 66 to the GPS Tracker from the control number, The tracker will call back to this control number.

Or you can use the admin number to call the tracker to monitor.
When the unit is in over-speed alarm, shake sensor alarm, or low battery alarm, it will send an alert to the admin number. (13265790180) Admin number Canceling:
Command: D101#
Reply: SET OK!

4.3. Over-speed Alarm setting
Over-speed Alarm setting:
Command: 1220000 070（Suppose speed is 70km/h ）
Reply: SET OK!
E.g:

SET OK

When the unit speed is over 70km/h, it will send the message “speed alarm!” to the admin number every 5 minutes. Over-speed Alarm canceling:
Command: 1220000 0
Reply: SET OK!

4.4. Shake the Alarm setting
Command： 1810000T10
Message Reply: SET OK!
E.g:

SET OK

Note: Pls keep the tracker stationary for 5 minutes, this function will work. The tracker will send an SMS “Shock alarm!” to the admin number when the unit get shocked.
Shake alarm Canceling:
Command: 1810000T0
Reply: SET OK!

4.5. SOS Alarm (For ST-904 Only) If you press the SOS button, It will send SMS with the location,
And call the admin number:

maps.google.com

4.6. Device working mode setting

1. WORK-Keep working mode: (it can work 30 hours)
   Command: WORK0000
   Reply: SET OK!
   (The tracker will keep working and send data by time interval)

2. MOVE-Work when the tracker is moving: (it can work 3 to 7 days)
   Command: MOVE0000
   Reply: SET OK!
   (Factory setting is “MOVE” mode) (Tracker only works when it is moving, when it is stopped, it will sleep, GPS shut off, and GSM works in low consumption mode. Vibration, SMS command, and calling tracker can wake up the tracker to work in 5 minutes.)

3. STANDBY-SMS or Call to tracker, it will work 5 minutes.
   (it can standby 12 days)
   Command: STANDBY0000
   Reply: SET OK!
   (Standby mode, GPS shut off, GSM works in low consumption. SMS, calling can wake up the tracker to work 5 minutes.)

4.7 Terminal (local) Time Setting (factory setting GMT 0)
Command: 8960000E00
Reply: SET OK!

4.8 Reset Hardware
Command: RESET
Reply: SET OK!
4.9 Read the Configure data
Command: RCONF
Reply: the ID, work mode, IP and Port, APN of tracker.

EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE

It’s the setting of the tracker

• ST-904(ST-903) is the model of the tracker.
• ID:9170913138 the ID of GPS Tracker
• UP:0000 the password of SMS
• U1:, U2:, U3: The control number
• MODE: GPRS-MOVE: GPS work mode.
• DAILY: OFF, GEO FENCE: OFF, OVER SPEED: OFF, VOICE: ON, SHAKE ALARM: OFF, SLEEP: ON status of the tracker
• APN: internet APN of the SIM Card
• IP:45.112.204.245:8090 the IP and port of the tracker
• GPRS UPLOAD TIME :20 is the GPS time interval
• TIME ZONE:0.0 time zone of the tracker

START ONLINE TRACKING

Every sim card carrier has its own APN content, we have two methods to find out apn content: check sim card carrier on the internet or put a sim card into a cell phone to find out APN

SMS: 8030000 APN
(APN is the Access Point Name of your SIM Card, please check with your SIM Card provider if you don’t know it)
E.g:
For MTN SIM cards in South Africa, we got APN information below.
APN name: internet
APN username:
APN password:
Send SMS to set up below
8030000 internet
If the APN needs a User name and Password, please send the command:
SMS: 8030000 APN APNuser APNpassword
E.g:
For Tesco mobile SIM card in the UK, we got APN information below.
APN name:prepay.tesco-mobile.com
APN username:tescowap
APN password: password
Send SMS to set up below
8030000prepay.tesco-mobile.com tescowap password
6.1 WEBSITE TRACKING
WEBSITE Tracking (PC Version):

Platform: www.sinotrackpro.com
User name: ID number on the tracker
Password: 123456
6.2 APPLICATIONS FOR ANDROID/IOS You can search SinoTrack PRO on APP Store (iOS) or Google Play (Android) Or Download from the QR Code:

http://www.sinotrack.com/download/

Server: SinoTrackPRO
User Name : ID number on tracker
Password: 123456
If you have more SinoTrack GPS trackers and want to manage them in one account, please contact us, we will create an account for you, so you can monitor multiple devices on the platform at the same time.

Notices:

1. GPS tracking can be worked outdoor.
2. Please make sure the GSM SIM card supports making calls, sending messages, and GPRS network.
3. Please make sure the GSM SIM card is with sufficient balance.
4. Please make sure the GSM card has opened the call shows and turned off the call transfer.
5. Please insert the GSM phone card correctly.
6. Do not assemble and disassemble the device at will.

FAQ and processing methods.

· Please check if the SIM card is GSM network.
·Don’t turn on the PIN code
·no calls can be diverted
· Please check if the voltage of the power is normal
Please check if the voltage of the power is normal
No GPS| A more open view of the sky is recommended to make sure the device can receive the GPS signal normally.
No reply to SMS| Password wrong or the format is wrong.
No reply to calling & No alarm message| The authorized / admin phone number is incorrect or has not setup
SMS position OK, cannot use the APP and web platform| Please check if APN is correctly set. And please find out the correct APN content of the SIM card. (Please refer to 6 settings.)
The platform position is different from the actual position.| No upload position-time or GPS signal: call the device phone number and receive the position message. If it no GPS signal. The position is the last GPS positioning location; If it has a GPS signal, it means the device doesn’t reach the uploading time.

References

• Loading...
• Loading...

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>