saxby 80497 Extrusion Light Surface Instruction Manual
- June 9, 2024
- saxby
Table of Contents
saxby 80497 Extrusion Light Surface
DIMENION
Surface
Recessed
Corner
Plaster-in
Bendable
Thank you for purchasing this accessory. Please read the instruction carefully before use to ensure safe and satisfactory operation of this product. Please retain these instruction for future referenc
Specification
- Surface
- 80497: 2000mm x 17mm x 9mm
- 94946: 2000mm x 17mm x 9mm
- 97734: 2000mm x 17mm x 9mm
- 97735: 2000mm x 23.5mm x 11.2mm
- 80498: 2000mm x 16.5mm x 13.5mm
- 97738: 2000mm x 23.5mm x 21.5mm
- Recessed
- 94947: 2000mm x 21.7mm x 6mm
- 97736: 2000mm x 30.7mm x 11.2mm
- 97739: 2000mm x 30.0mm x 21.5mm
- 80499: 2000mm x 23.1mm x 13.4mm
- 102666: 2000mm x 21mm x 13.5mm
- Bendable
- 97732: 2000mm x 18mm x 5mm
- Corner
- 80501: 2000mm x 16mm x 16mm
- 97737: 2000mm x 30mm x 30mm
- 102668: 2000mm x 61mm x 61mm
- Plaster-in
- 80500: 2000mm x 56.9mm x 15.4mm
- 94948: 2000mm x 64mm x 14mm
- 94949: 2000mm x 100mm x 19.6mm
- 102665: 2000mm x 100mm x 29.6mm
- 102667: 2000mm x 95mm x 40mm
Installation
Surface / Recessed / Bendable / Corner
- Choose an ideal place to mount the profile.
- Remove the 4 brackets from the fixing pack.
- Using the brackets as templates, mark and drill the position of the fixing holes.
- Ensure the mounting structure is capable of holding the weight of the product. Take care to avoid damaging any concealed wiring and pipes.
- Attach both brackets to the chosen mounting surface using the plastic plugs and screws (not supplied) according to the following installation diagram.
- Remove the backing off of the chosen LED module strip and stick down inside the aluminium profile.
- Attach diffuser to the profile, sliding into the profile grooves.
- Place end caps onto the ends of the fitting.
- Push profile onto the brackets to secure.
- Your fitting is now ready for use.
Installation for Plaster-in
- Using the aluminium profile as templates, mark and drill the position of the fixing holes.
- Ensure the mounting structure is capable of holding the weight of the product. Take care to avoid damaging any concealed wiring and pipes.
- Remove the backing off of the chosen LED module strip and stick down inside the aluminium profile.
- Attach diffuser to the profile, sliding into the profile grooves.
- Place end caps onto the ends of the fitting.
- Push the aluminum profile into the existing groove.
- Then use the plastic plugs and screws (not supplied) to fix the aluminum profile to the wall.
- Cemented the sides of the aluminum profile.
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish. For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
V5 12/05/2022
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG, Brilliantstrasse 1, D-27442 Gnarrenburg
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>