Xmart HL-WALL-20 Solar Lamp User Manual
- June 9, 2024
- xmart
Table of Contents
Xmart HL-WALL-20 Solar Lamp
TECHNICAL SPECIFICATIONS
WARNING
- Keep the device away from TIre and tire risk
- There are no replaceable parts inside the lamp. If disassembled warranty will be void.
- Do not remove battery for other use. If backup time is too short, lamp’s battery needs to be recharged under bright sunlight
- Clean solar panel regularly for more efTIcient operation and longer backup (Suggestion: At least every 6 months)
- Long term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion
- Operation temperature for this lamp must comply with Technical Specitications
Parts Identification
Special Features: Monocrystalline Solar Panel Li-ion Rechargeable Battery sedoM noitarepO elbarugtinoC Material: Aluminum Alloy & PC
Installation Instructions
Fix Solar Panel Bracket to the wall:
-
D1 (10W/5W): 6.5 mm F
L1 (10W/5W): 100 mm -
Screw Solar Panel to Bracket:
-
Screw Lamp Bracket to the wall
-
Connect Lamp and Solar Panel cables
Solar Panel must be oriented toward sun for battery ycneictife gnigrahc
IMPORTANT
- Use standard installation accessories
- If stored, charge the lamp every 3 months, to avoid battery damage
- If stored for more than 1 year without charging, make a charge & discharge process to assure battery is in good condition, otherwise it is not allowed to use.
Operation Instructions
Power On/Off: Press switch for 1.5 Sec, approx.
Mode Change: Press switch shortly to choose Mode 1, Mode 2, or Mode 3.
Available Modes:
Mode 1 (Red): 50% x 5H + 10% Until dawn
Mode 2 (Green): 30% x 5H + 10% Until dawn
Mode 3 (Orange): 20% Until dawn
T Mode (Green Flasing): See note below
Select Operation Mode according to your own requirements
Battery Power Indication:
Green: > 70%
Orange: Between 30% and 70%
Red: < 30%
Note: Indicator LED regularly shows Battery Capacity. When changing
Operation Mode it shows selected mode for 5 Sec, then it returns to show
Battery Capacity
T Button on Remote Control
- Short press once for 100% bright for 1 hour
- Short press twice for 100% bright for 2 hours
- After selected time, lamp will go back to previous mode.
Dimensions
Top View
Front View
Right Side View
Packing Information
Net and Gross weight information is for reference purposes only
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>