vtech 540703 Peek-a-Boo Surprise Instruction Manual

June 9, 2024
vtech

Peek-a-Boo Surprise
Instruction Manualvtech 540703 Peek-a-Boo Surprise
-

540703 Peek-a-Boo Surprise

VTech understands that a child’s needs and abilities change as they grow and with that in mind we develop our toys to teach and entertain at just the right level…

| |
---|---|---
Toys that will stimulate their interest in different textures, sounds and colours| Interactive toys to develop their imagination and encourage language development| Cool, aspirational and inspiring computers for curriculum related learning
I am…
…responding to colours, sounds and textures
…understanding cause and effect
…learning to touch, reach, grasp, sit-up, crawl and toddle| I want…
…to get ready for school by starting to learn the alphabet and counting
…my learning to be as fun, easy and exciting as can be
…to show my creativity with drawing and music so my whole brain develops| I need…
…challenging activities that can keep pace with my growing mind
…intelligent technology that adapts to my level of learning
…National Curriculum based content to support what I’m learning at school
vtech 540703 Peek-a-Boo Surprise - fig 1

To learn more about this and other VTech® products, visit www.vtech.co.uk

vtech 540703 Peek-a-Boo Surprise - Music Button

INCLUDED IN THE PACKAGE

  • Peek-a-Boo Surprise
  • Quick Start Guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.

GETTING STARTED

Battery Removal and Installation

  1. Make sure the unit is turned OFF.
  2. Locate the battery cover on the bottom of the unit, use a screwdriver to loosen the screw and then open the battery cover.
  3. If used batteries are present, remove these batteries from the unit by pulling up on one end of each battery.
  4. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
  5. Replace the battery cover and tighten the screw to secure.

WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.

IMPORTANT: BATTERY INFORMATION

  • Insert batteries with the correct polarity (+ and -).
  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
  • Only batteries of the same or equivalent type as recommended are to be used.
  • Do not short-circuit the supply terminals.
  • Remove batteries during long periods of non-use.
  • Remove exhausted batteries from the toy.
  • Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES:

  • Remove rechargeable batteries (if removable) from toy before charging.
  • Rechargeable batteries are only to be charged under adult supervision.
  • Do not charge non-rechargeable batteries.

Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the market after 13th August, 2005.
Help protect the environment by disposing of your product or batteries responsibly.

VTech® cares for the planet.
Care for the environment and give your toy a second life by disposing of it at a small electricals collection point so all its materials can be recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with your local council for kerbside collections.

PRODUCT FEATURES

  1. On/Off/Volume Switch
    To turn the unit On, slide the On/Off/
    Volume Switch to the Low volume or the High volume position.
    You will hear a playful song, a phrase and a short tune. To turn the unit Off, slide the On/Off/Volume Switch to the Off position.

  2. Automatic Shut-Off
    To preserve battery life, the Peek-a-Boo Surprise will automatically shut off after approximately 25 seconds without input. The unit can be turned on again by pressing the light up button or by triggering the motion sensor.

NOTE
If the unit powers down or if the light fades out during play, please install a new set of batteries.

ACTIVITIES

  1. Music Button
    Press the Music Button to learn about the sloths and hear sing-along songs, fun sounds and melodies.
    The light will flash with the sounds.

  2. Motion Sensor
    Shake, spin and roll the toy to hear a variety of playful sounds. The light will flash with the sounds.

MELODIES

1. Humpty Dumpty
2. A-Tisket, A-Tasket
3. Hey Diddle, Diddle
4. Frère Jacques
5. Diddle, Diddle Dumpling
6. Little Boy Blue
7. Bingo
8. Here We Go ’Round the Mulberry Bush| 9. Hickory, Dickory, Dock
10. Old King Cole
11. Polly, Put the Kettle On
12. Jack Be Nimble
13. Skip to My Lou
14. Teddy Bears’ Picnic
15. Yankee Doodle
---|---

SONG LYRICS

Song 1
Wiggle, giggle, roll, roll, roll!
Wibble, wobble on the floor!
Song 2
Sleepy baby sloth, do you want to play?
We can wobble and roll through the day.
Song 3
Peek-a-boo, sweet mummy sloth,
We see you hiding inside of the ball.
Song 4
Roll, roll, roll the ball, roll it ’round and ’round.
Roll it up, roll it down, roll it all around.

CARE & MAINTENANCE

  1. Keep the unit clean by wiping it with a slightly damp cloth.
  2. Keep the unit out of direct sunlight and away from any direct heat sources.
  3. Remove the battery if the unit will not be in use for an extended period of time.
  4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

  1. Turn the unit Off.
  2. Interrupt the power supply by removing the batteries.
  3. Let the unit stand for a few minutes, then replace the batteries.
  4. Turn the unit On. The unit should now be ready to use again.
  5. If the unit still does not work, install a new set of batteries.
    If the problem persists, please contact our Consumer Services Department, and a service representative will be happy to help you.

CONSUMER SERVICES

Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.
UK Customers:
Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support
Australian Customers:
Phone: 1800 862 155
Website: support.vtech.com.au
NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au

PRODUCT WARRANTY/CONSUMER GUARANTEES

UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.

Visit our website for more information about our products, downloads, resources and more.

www.vtech.co.uk
www.vtech.com.au TM & © 2022 VTech Holdings Limited.
All rights reserved.
IM-540700-001
Version:0

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals