Easee Equalizer Small Device User Manual
- June 9, 2024
- easee
Table of Contents
Equalizer Small Device
User Manual
Equalizer
Easee Equalizer is a small smart device, designed to optimize your charging experience. It connects to your power meter and automatically balances the total energy level between the Charging Robot(s) and your building. It enables you to charge smarter, safer, faster and to install more Charging Robots in your building without the need for expensive infrastructure upgrades.
Charge smarter, safer and faster
Why choose Easee Equalizer?
Benefits
– Dynamic load balancing between the Charging Robot(s) and the building
– Charge your EVs faster when the the building’s energy consumption is lower
– Avoid overload and power interruption while charging your EV
– Safely install more Charging Robots (hundreds) in a building (home, cabin,
apartment block or commercial building)
– Avoid unnecessary investments in infrastructure upgrades or cost of
increased electricity access
– Direct communication with Easee chargers through Easee Link™ or WiFi
– Monitor the power consumption in your building through the Easee app
– Magnetic backside snaps directly onto your fuse cabinet
– Up to 50m coverage in open air
– Quick and easy installation with optional support of full accessory kits
For a list of supported meters, go to http://easee.support
*When used together with an Easee Charging Robot.
Why choose Easee Equalizer?
Electric car charging requires a lot of energy, that has to be shared wisely
with your building. Therefore, Easee Equalizer allows you to use all available
power for car charging by constantly balancing the available energy to your
home and your charger to distribute it efficiently where it is needed. You
never have to think about fuses tripping.
Easee Equalizer connects to your power meter and communicates with the
Charging Robot(s). Whether the Equalizer can be set up by yourself or requires
an electrician depends on your location and electrical installation (ask your
electrician).
Charge when there is available power
Easee Equalizer makes sure that the charging of your EVs is done at the
most convenient time, when the demand for other loads is low. When you have
paired your Easee Equalizer to the system, it will automatically start to
balance the available power in the building based on its readings and optimize
your charging experience.
Easee Link ™ will ensure that the automatic load balancing will continue to
work even if the connection with the cloud is interrupted or should there be a
problem with your WiFi.
Monitoring
While the main purpose of the Easee Equalizer is to optimize the charging
experience, it also provides the opportunity to monitor your daily power
consumption through the Easee App.
With a full overview of your home’s consumption, you have the power literally
in your hands to save energy and hence the environment.
Specifications
Measurement in mm
Technical
General
Product (mm): H: 110 x W: 110 x D: 27.5
Packaging (mm): H: 130 x W: 130 x D: 39
Operating temperature: -20 °C to +50 °C
Weight: 95 g
Material: PC/ABS
Colour: White
IP degree: IP40
Power supply: 5-32 V DC 100 mA
RJ12 connector
Integrated magnets for attaching the product to metal surfaces or to wall
mount plate
Cabling
Cable length: 1.5 m
RJ12 custom made cable¹
Can be extended using an extension cable up to 15 m
Max transmitted power
Radio: 25 mW at 863–870 MHz
WiFi: 50 mW at 2.4–2.472 GHz
Connectivity
Easee Link RF™ and Wifi² P1 smart meter communication
Modbus RTU (RS-485) connection to energy meter³
Monitor power consumption with the Easee App
¹RFID / NFC reader
²RJ11/RJ12 uses the same connector.
WiFi is required for normal operation and for future software updates. When
offline or unstable, it will use Easee Link RF backup in small installations
with one primary charger. Easee Link RF™ via radio may be limited by walls,
concrete or other obstacles.
³Only for supported meters.
The product contains
Equalizer Kit
All in one solution: we offer the necessary accessory kits for one and
multiple circuits. No matter what type of power meter you are facing or how
old the installation is, we offer a complete solution including a manual to
connect the Equalizer to the building. All of the components are tested and
guaranteed to work with the Equalizer.
Download the intruction manual by scanning this QR code.
****https://download.easee.com/media/?mediaId=B0AE6EA9-BFAA-4006-987D9CC9FA20FEEE
The Equalizer Kit contains
Equalizer Kits – UK Commercial
The Equalizer P1 500A Kit contains
THIS
DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
The latest version of this publication can be downloaded at
http://easee.support
No part of this publication may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including, but not limited to, copying,
recording, retrieving data, or computer networks without the written
permission of Easee AS.
Easee and all other Easee product names and slogans are trademarks or
registered trademarks of Easee AS. Easee products can be protected by one or
more patents.
All other products and services mentioned may be trademarks or service marks
of their respective owners.
Illustrations of the product and user interface are exemplary and may differ
from the actual appearance.
July 2022 – Version 2.01
© 2022 by Easee AS. All rights reserved.
Easee is distributed and maintained by a network of qualified partners and
resellers. Find more information and your local partner at:
www.easee.com
Easee AS
Grenseveien 19
4313 Sandnes
Org.nr: 920 292 046
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>