HOME ACCENTS HOLIDAY TY290-815R 25L Warm White Faceted C9 LED Lights User Manual

HOME ACCENTS HOLIDAY TY290-815R 25L Warm White Faceted C9 LED Lights

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should always be fallowed including the following:

• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit interrupting (GFC) Outlet. If one is not provided, contact a qualitied electrician for proper installation. CIS seasonal use product Is not intended Tor permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
• Do not secure the wiring or the product with staples or nails, or place on sharp ho0KS or nails. Do not let lamps rest on the supply cord or on any wire.  produce When leaVing ne noUSe, when retiring for the night, or if let unattended.
• This is an electric product-nota toy To avoid risk of fre, burns, personal injury and electric shock it should not be played with or placed where small children’s can reach it. DO not use  product  tian IS Irenaeus use. DO not ornaments or other objects iron cord, wire, or light string
• Do not Close doors or windows on the product or extension cords as this may damage the wire insulation. Do not cover the product with cloth, paper or any material not part of the product  in use.
• This product is equipped with push-in type LED lamps. Do not twist lamps.
• This product employs Overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. AlSQ unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking tor proper fuse raing) and check the product. if the replacement fuse blows, a short-circuit may be present and the product should be discarded.
• Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS

USE AND CARE INSTRUCTIONS

• When the product is placed on a live tree, the tree should be well maintained and fresh.
• Do not place on live trees in which the needles are brown or break off ,easily. Keep the tree holder tilled with water. f the product is placed on a tree, the tree should be well secured and stable
• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed Copper wire.
• When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, Connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight
• The LED lamp has polarity. Do not deliberately change the direction of the LED lama in the lamp holder.

USER SERVICING INSTRUCTIONS

• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
• Open Tues. cover. slide open Tues. access cover on top Of attachment plug towards bides.
• Remove fuse carefully. Turn plug over to remove fuse.
• Risk of fire. Replace fuse only with 3 Amp, 125Volt fuse provided with product.
• Ciose fuse cover. Side closed the fuse access cover on top of attachment plug.
• Risk of fire.Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

To replace a lamp:

• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by puling on cord.
• Remove the cover as shown in Fig,1, Take out the burned out LED lamp and pull lamp and plastic base straight out of lamp holder as shown in Fig.2.
• Insert the spare LED lamp into the lamp holder in correct direction as shown in Fig.3,Lock the cover on the lamp holder as shown in Fig.4.
• Replace lamp with only 3.4 volt, 0.068 watt LED Type lamps provided with this product.

CAUTION:

• Do not exchange the lamp base on the new lamp With the old one or the LED wires may break.
• Pull lamp and plastic base straight out of lamp holder.
• Do not deliberately change the direction of the LED lamp in the lamp holder (see Fig. 2)

• Fig.1 Remove the cover
• Fig. 2 Remove the burnt-out lamp
• Fig. 3 Replace with the spare lamp
• Fig. 4 Lock the cover ALTEIANG

CAUTION
This string is rated 2.4 Watts (0.02Amps), do not overload. Connect other Lighting Strings or decorative   end-to-end up to a maximum of 216 Watts (1.8Amps) total.
If connecting to a lighting string that does not have a wattage (W) rating (found on the tag within 6 inches of the plug), Calculate The wattage (W) as follows: Multiply the current (A) which is on the flag type label located Within 6 inches of the plug, by 120.
For example, string is rated 120v, 60Hz, 0.02AmpS O.02×120-2.4 Watts
Total amount of wattage that can be connected 216W-2.4W=213.6W

CAUTION:

• Risk of fire. This product does not contain lamp shunts, which allow the product to operate if one lamp burns out. Do not replace lamps with other than the spare lamps provided with this product.
• Replace lamps only with 3.4 vote, 0.068 watt spare LED lamps provided with this product.

CAUIION. To reduce the risk of fire and eclectic shock:

• Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.
• Do not mount or support strings in a manner that can cut or damage wire insulation.

FOR INDOOR AND OUTDOOR USE
MODEL NO. TY-B-25L/1W-c9-W-C

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>