Comfort Zone CZHVW30 Series 30 Inch Wall Mounted Fan Instruction Manual
- June 9, 2024
- Comfort Zone
Table of Contents
30″ Wall Mounted Fan
CZHVW30 Series
Instruction Manual
Features:
- 2-Speed Industrial Fan
- Individually Balanced Aluminium Blade
- All Metal Body
- Steel Safety Grilles
- Pull String for Power and Speed Control
INTENDED USE:
This product is intended for indoor residential and office use only, not for
industrial or other commercial applications. Use only with electrical wiring
that is in good working order and that meets applicable codes and ordinances.
If you have any questions whether your wiring is adequate, consult a qualified
electrician.
While using your fan, you should follow the IMPORTANT INSTRUCTIONS listed
below. As part of those instructions, we have used the word “WARNING” to
indicate the level of hazard:
WARNING indicates a hazard which, if not avoided, could result in injury
or death.
IMPORTANT INSTRUCTIONS
As with all electrical appliances, basic safety precautions should always be followed to reduce the risk of electric shock, fire, or injury to persons, including the following precautions:
-
Read all the instructions before using this fan.
-
Use this fan only as described in this manual. Any other use not recommended by the manufacturer may cause electrical shock, fire or injury to persons.
-
Do not operate the fan with a damaged power cord or after the fan malfunctions or has been dropped in any manner.
-
Use of extreme caution is necessary when any fan is used by or near children, disabled persons or pets and whenever the fan is left operating unattended.
-
Do not place the fan on a small, unlevel, uneven or any surface which might allow fan to tip or fall.
-
For proper operation, fan should be placed on a smooth, non-combustible, level surface.
-
Always unplug fan when not in use, when moving from place to place, when assembling or disassembling parts, and before cleaning.
-
The use of attachments, not recommended or sold by the manufacturer, may cause hazards.
-
Do not use outdoors.
-
Do not use fan in window. Rain may cause electrical hazard (for non-window models).
-
Do not operate the fan with blade guards or any safety device removed.
-
Avoid the use of extension cords due to risk of fire. If an extension cord must be used, the cord must be minimum 14 AWG and rated not less then 1875 watts.
-
Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic area where it will not be tripped over.
-
Do not insert or allow any object to enter any openings on the fan. Doing so may cause electric shock and/or fire hazard.
Avoid contact with moving parts. -
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure they do not play with the appliance.
READ & SAVE THESE INSTRUCTIONS
WARNING: SHOCK HAZARD
Use your fan only in dry environments. This fan is not intended for use in a
bathroom, laundry area, or similar locations, or near sinks, washing machines,
swimming pools or other sources of water. Never locate fan where it may fall
into a bathtub or other water receptacle. Do not use in damp environments such
as flooded basements.
WARNING: HOT SURFACES
Do not touch fan motor when in use. This motor is hot when in use, to avoid
burns, do not let bare skin touch hot surfaces.
WARNING: FIRE HAZARD
Fans have arcing or sparking parts inside. Do not use near combustible
materials or flammable gases or sources of heat.
DO NOT USE in areas where gasoline, paint or flammable materials are used or
stored. To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock, fire, or damage the fan.
WARNING: ELECTRICAL SHOCK HAZARD
Do not use with damaged cord or plug. Use with adequate electrical system that
is up to code.
CAUTION: TO PREVENT ELECTRIC SHOCK, this product has a three prong
grounded plug that must be inserted into a matching properly grounded outlet
to reduce the risk of electrical shock. Do not attempt to defeat this safety
feature.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not use this
product with any solid-state speed control device.
DO NOT operate any fan with a damaged cord or plug or after fan malfunctions,
has been dropped or damaged in any manner.
Do not operate fan with a broken blade, safety cage or any visual
imperfections. Disconnect power before servicing. For repairs covered under
warranty, see warranty statement. For all other repairs contact Comfort Zone®
Customer Service by telephone or mail for information and assistance.
DO NOT run power cord under carpeting. DO NOT cover cord with throw rugs,
runners or the like. Arrange cord away from traffic area where it will not be
tripped over. Avoid the use of extension cords due to risk of fire. If an
extension cord must be used, the cord must be minimum 14 AWG and rated not
less then 1875 watts. Do not use an extension cord unless the plug can be
completely inserted into its receptacle. Unplug the fan when not in use. Do
not operate fan with its ventilation obstructed.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC, SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by qualified person(s)
in accordance with all applicable codes and standards, including fire-rated
construction.
b) When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
Installation Instructions
The wall fan must be mounted on 12 inch (300mm) thick dry and cement – grouted
firm wall or on 4 by 5 inch wood studs / joists.
Use wall bracket as a template for locating the holes to be drilled.
After determining the hole locations, use an appropriate sized drill bit and,
drill holes through mounting surface.
It is recommended that a minimum of grade 5 fasteners be used.
The following are acceptable surfaces for mounting wall mount assembly.
STEEL SURFACE – When mounting to a steel surface, such as vertical I-beam,
drill through holes at pre-marked locations, using a 9/32″ drill bit. Attach
wall mount assembly to mounting surface using 1/4″-20 hex screw, in
combination with 1/4″ flat washers, 1/4″ lock washers, and 1/4″-20 hex nuts.
MASONRY SURFACE – When mounting to a masonry surface use a 1/4″ expansion type
bolt or 1/4″ masonry lag with shield.
Drill holes at pre-marked locations using appropriate sized drill bit as
recommended for fastener.
NOTE: HARDWARE NOT SUPPLIED
Assembly Instructions:
- Install the wall bracket following Installation Instructions.
- Install the fan motor on the angle support bracket.
- Assembling the back guard, blade, font guard to the motor.
USAGE:
Fan operation: Always operate the fan in the upright position following all
instructions and recommendations listed in this manual.
Fan location: Place the fan in the area of the room that will provide proper
fan cooling.
Fan connection: Plug fan directly into 120 volt A.C., 60 Hz wall outlet. Be
sure plug fits tightly in outlet. A loose connection may cause overheating and
damage to the plug or fan.
Note: To prevent overloading a circuit, do not plug the fan into a
circuit that is servicing other electrical needs. Speed control: To operate
the fan, each pull of the string will cycle through the following settings:
- OFF
- LOW
- HIGH
- OFF
To Adjust Airflow Upward or Downward:
Loosen the position screw first and then loosen the pivot nut.
Tilt motor to the desired angle then firmly tighten the pivot nut first and
then tighten the position screw.
Specifications
Voltage
120V
Frequency
60Hz
Wattage
Low| High
185W| 250W
Max. Amperage
2.1A
Recommended Extension Cord Gauge
16 AWG
CARE AND MAINTENANCE:
Cleaning: CAUTION-Before cleaning the fan be sure to disconnect power
cord from the plug. Unscrew and remove front grille only. Clean the grille and
fan blade surface with a clean damp cloth. Do not use harsh chemical or
abrasive cleaners. DO NOT IMMERSE THE FAN OR ANY WIRES IN WATER. Replace front
grille before fan use. Allow fan to dry completely before use. Periodic grille
cleaning with a vacuum will prevent dust build up. The motor does not require
any interior maintenance, cleaning or lubrication.
Maintenance: The Internal motor bearings are permanently lubricated at the
factory and do not require any additional lubrication.
Repair: DO NOT OPERATE THE FAN WITHOUT THE GRILLE IN PLACE. DO NOT USE THE FAN
IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
STORAGE: Keep original package for storage of the fan. Coil and tie the power
cord to avoid damage during storage.
LIMITED WARRANTY
This unit is guaranteed to the original retail purchaser against defects in
quality or workmanship for a period of one year from the date of original
purchase. If this unit fails because of a manufacturing defect within 30 days
of purchase, return the unit, with your receipt, to the retailer. After 30
days, but within the warranty period, if the unit was purchased within the
continental United States, return it, freight prepaid, to World and Main for
repair or replacement. If the unit was purchased outside the continental
United States, return the unit to the place of purchase. This warranty does
not cover damage caused by misuse, abuse, overheating or alteration. Repairs
made by anyone other than World and Main are not covered in this warranty.
World and Main will not be held liable for any losses due to neglectful
operation. All implied warranties, including the warranties of merchantability
and of fitness of purpose, if applicable, are hereby limited in duration to
the period of one year from the date of original retail purchase. Some states
do not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you. Incidental or consequential damages arising
from a breach of either express or implied warranties are hereby disclaimed
and excluded. Some states do not allow the exclusion of limitation of
incidental or consequential damages, so this limitation or exclusion may not
apply to you. Upon the expiration of this warranty all such liability will
terminate. No other warranties are expressed or implied.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
No informal dispute settlement mechanisms are available. This limited warranty
is given in lieu of all other warranties.
Manufactured for:
World and Main (Cranbury), LLC
324A Half Acre Rd.
Cranbury, NJ 08512 USA
800-221-6895
www.comfortzoneproducts.com
Rev. 10/18/2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>