HOME ACCENTS HOLIDAY TY100L-SMTW-M 100L Multi Mini LED Twinkle Lights User Manual
- October 29, 2023
- HOME ACCENTS Holiday
Table of Contents
TY100L-SMTW-M 100L Multi Mini LED Twinkle Lights
User Manual
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed
including the following:
a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) Do not use seasonal products outdoors unless marked suitable for indoor and
outdoor use. When products are used in outdoor applications, connect the
product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installation.
c) This seasonal use product is nof intended for permanent installation or
use.
d) Do not mount or place near gas or electric heaters, fireplace, candles or
other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving tie house, when retiring for the night, or
if left unattended.
h) This is an electric product-not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or placed
where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire,, or light string.
k) Do not close doors or windows on the product or extension cords as this may
damage the wire insulation.
l) Do not cover the product with cloth, paper or any material not part of the
product when in use.
m)This product is equipped with push-in type LED lamps. Do not twist lamps.
n) This product employs overload protection (fuse) A blown fuse indicates an
overload or shod-circuit situation. If the fuse blows,,unplug the product from
the outlet. Also unplug any additional strings or products that may be
attached to the product. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check the
product. If the replacement fuse blows, a short-circuit may be present and the
product should be discarded.
o) Read and follow all instructions that are on the product or provided with
the product.
SAVE THESE INSTRUCTIONS USE AND CARE INSTRUCTIONS
a) When the product is placed on a live tree, the tree should be well
maintained and fresh. Do not place on live trees in which the needles are
brown or break off easily. Keep the tree holder filled with water.
b) If the product is placed on a tree, the tree should be well secured and
stable.
c) Before us ng or reusing, inspect product carefully. Discard any products
that have cut, damaged, or frayed wire insulation or cords, cracks in the
lampholders or enclosures,loose connections, or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is
placed, including trees, branches, or bushes, to avoid any undue strain or
stress on the product conductors, connections, and wires.
e) When not in use, store neatly in a cool, dry location protected from
sunlight.
f) The LED lamp has polarity. Do not deliberately change the direction of the
LED lamp in the lampholder.
USER SERVICING INSTRUCTIONS
To re lace the fuse:
a) Gras plug an remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of attachment plug
towards blades.
c) Remove fuse carefully. Turn plug over to remove fuse.
d) Risk of fire. Replace fuse only with 3 Amp, 125Volt fuse(provided with
product.)
e) Close fuse cover. Slide closed the fuse access cover on top of attachment
plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment plug is
damaged.
To replace a lamp
a) Grasp plug an remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
b) Unlock the burned out LED lamp by lifting the hook and pull lamp and
plastic base straighfout of lampholder as shown in Fig.1.
c) Insert the spare LED lamp into the lampholder in correct direction and lock
the hook of [amp base by pushing lock down into the tab as shown in Fig.2.
d) Replace lamp with only 3.4 volt, 0.068 watt LED type lamps provided with
this product.
CAUTION
a) Do not exchange the lamp base on the new lamp with the old one or the LED
wires may break.
b) Pull lamp and plastic base straight out of lampholder.
c) Do not deliberately change the direction of the LED lamp in the lampholder
(always match the hook to the tab, see Fig. 2 ).
CAUTION:
This string is rated 7.2 Watts ( 0.06Amps ), do not overload. Connect other
Lighting Strings or decorative outfits end-to-end up to a maximum of 216 Watts
(1.8Amps) total.
If connectinc to a lighting strip that does not have a wattage (W)
ratin.g.(found on the tag within 6 inches of the plug), Calculate The wattage
(W) as follows: Multiply the current (A which is on the flag type label
located Within 6 inches of the plug, by 120.
For example, siring is rated 1 OV, 60Hz, 0.06Amps
0.06×120=7.2 Waft.
Total amount of wattage that can be connected 216W-7.2W=208.8W
CAUTION:
a) Risk of fire. This product does not contain lamp shunts, which allow the
product to operate if one lamp burns out. Do not replace lamps with other than
the spare amps provided with this product.
b) Replace lamps only with 3.4 volt, 0.068 watt spare LED lamps provided with
this product.
CAUTION:
To reduce the risk of fire and electric shock:
a) Do not install on trees having needles, leaves or branch coverings of metal
or materials which look like metal.
b) Do not mount or support strings in a manner that can cut or damage wire
insulation.
FOR INDOOR AND OUTDOOR USE
MODEL NO.LED-1 00L/3WB-1 7-TW5-F-C
Documents / Resources
| HOME
ACCENTS HOLIDAY TY100L-SMTW-M 100L Multi Mini LED Twinkle
Lights
[pdf] User Manual
TY100L-SMTW-M, 100L Multi Mini LED Twinkle Lights, LED Twinkle Lights, 100L
Multi Mini Twinkle Lights, Twinkle Lights, Lights
---|---