K nner S hnen KS 22A-FC Fast Li-Ion Battery Charger Owner’s Manual
- June 9, 2024
- K nner S hnen
Table of Contents
K nner S hnen KS 22A-FC Fast Li-Ion Battery Charger
INTRODUCTION
Thank you for your purchase of Könner & Söhnen® products. This manual contains
a brief description of safety, use and debugging. More information can be
found on the official manufacturer’s website in the support section: www
.konner-sohnen.com/manuals
You can also go to the support section and download the full version of the
manual by scanning the QR code, or on the website of the official importer of
Könner & Söhnen products: www.konner-sohnen.com
We care about the environment, therefore, we consider it expedient to saveWe care about the environment, therefore, we consider it expedient to save paper and leave in print a short description of the most important sections.paper and leave in print a short description of the most important sections. Be sure to read the full version of the manual before getting started!
Manufacturer reserves the right to make alterations into the generators, which may not be reflected in this manual. Pictures and photos of the product may vary from its actual appearance. At the end of this manual,You may find contact information which you are free to use in case of any issues occurrence
All data, specified in this operation manual is the most up to date for the moment of its publishing. The cur-rent list of service centers you can find at the website of official importer: www.konner-sohnen.com
ATTENTION/DANGER: Failure to follow the recommendations marked with this
sign may lead to serious injury or death of the operator or third parties.
IMPORTANT: Useful information while operating the machine.
USER INSTRUCTION MANUAL
To reduce the risk of battery failure, follow these instructions and those published by the manufacturer of the battery and any equipment you intend to use in the vicinity of the battery. Review the cautionary markings on these products and on the engine.
- Keep out of reach of children.
- Use only attachments recommended or sold by the battery charger’s manufacturer. Use of non-recom- mended attachments may result in a fire, electric shock or injury.
- Locate the battery charger’s power cord so it cannot be stepped on or subjected to damage or stress.
- Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a qualified professional for inspection and repair.
- Do not disassemble the charger. Take it to a qualified professional when service or repair is required.
- To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning.
- Do not use an extension cord.
- Always charge the battery in a well- ventilated area.
- Do not set the charger on flammable materials, such as carpeting, upholstery, paper, cardboard, etc.
- NEVER smoke or allow sparks or flames in the vicinity of the battery.
- Do not expose the charger to rain or snow.
- When disconnecting the battery charger, pull by the plug, not by the cord. Pulling on the cord may cause damage to the cord or plug.
- Do not operate the charger with a damaged cord or plug.
IMPORTANT: This charger can be operated from the mains supply with a nominal voltage of 230 V. The mains plug must be in-serted into the outlet, and the outlet must be properly installed and grounded under applicable local codes and regulations. The plug contacts must fit in the outlet.
SPECIFICATIONS
Model| KS 22A-FC ***| KS 40A-FC ****| KS 37A-FC
---|---|---|---
Charge battery type| Li-Ion battery| Li-Ion battery| LiFePo4
Output power| 500 W| 1000 W| 1000 W
Max. output voltage| 25.2 V ± 0.2 V| 25.2 V ± 0.2 V| 28 V ± 0.2 V
Output current| 22 A ± 3%| 40 A ± 2%| 37 A ± 2%
Power efficiency| ≥ 85%| ≥ 85%| ≥ 85%
Rated input voltage| 200-230 V, AC/50 Hz| 200-230 V, AC/50 Hz| 200-230
V, AC/50 Hz
Shell material| black aluminium| black aluminium| black aluminium
Operating temperature| -10 °C to +40 °C| -10 °C to +55 °C| -10 °C +55 °C
Storage temperature| -20 °C to +70 °C| -20 °C to +70 °C| -20 °C +70 °C
Humidity| 5%~80%| 5%~90%| 5%~90%
| Software over voltage| Software over voltage| Software over voltage
| protection| protection| protection
Protection| Thermal protection
Current limiting protection
| Thermal protection
Current limiting protection
| Thermal protection
Current limiting protection
| Short circuit protection| Short circuit protection| Short circuit protection
| Reverce polarity protection| Reverce polarity protection| Reverce polarity
protection
Dimensions (LxWxH), mm| 210x120x73| 260x158x91| 260x158x91
Net weight, kg| 2.2| 4.3| 4.3
- Suitable only for portable power stations KS 1200PS-FC, KS 2200PS-FC.
- Suitable only for portable power stations KS 2200PS-FC.
- Suitable only for portable power stations KS 3000PS-FC. For Li-Ion batteries only!
IMPORTANT: Manufacturer reserves the right to make changes and/or improvements in design, components set and technical attributes without notice and without incurring obliga-tion. The pictures in this manual are schematical and may not match the parameters of original product.
USING THE APPLIANCE
To charge the portable power station, the portable power station, you must first connect the charger to the battery and then plug the charger into a power outlet. Check the indicators on the charger.
- Indicator 1 should light up, which means that the charger is on, and indicator 2, which means that the battery is charging. Indicator 3 (green) means that the battery is not connected to the charger.
- Finishing battery charging: Finishing battery charging: first unplug the charger from the power outlet and then from the battery. Fold up the charger.
SECURITY AND MAINTENANCE
A minimal amount of care can keep your battery charger working properly for years.
- Occasionally cleaning the case of the charger with a soft cloth will keep the finish shiny and help prevent corrosion.
- Coil the input and output cords neatly when storing the charger. This will help prevent accidental damage to the cords and charger.
- Store the charger unplugged from the AC power outlet in an upright position.
- Store inside, in a cool, dry place. Do not store the clamps clipped together, on or around metal, or clipped to the cables.
WARRANTY SERVICE TERMS
The international manufacturer warranty is 1 year. The warranty period starts from the date of purchase. In cases when warranty period is longer than 1 year according to local legislation please contact your local dealer. The Seller which sells the product is responsible for granting the warranty. Please contact the Seller for warranty. Within the warranty period, if the product fails because of defects in the production process, it will be exchanged on the same product or repaired.
All faults caused by the manufacturer during the warranty period will be eliminated free of charge. Warran-ty repair is carried out only if you have a fully completed warranty card, the Buyer’s signature of acceptance of the warranty terms, as well as a document supporting the purchase (cash receipt, sales slip or invoice). In the absence thereof, as well as in the event of errors or corrections not authenticated by the seller’s seal or illegible inscriptions in the warranty card or tear-off coupon, no warranty repair is carried out, no objections to quality are accepted and the warranty card is withdrawn by the service center as invalid. The device is accepted for repair clean and full.
EC Declaration of Conformity
The following products have been tested by us with the listed standards and found in compliance with the European Community Electromagnetic compatibility Directive (EMC) 2014/30/EC.
- Manufacturer: DIMAX INTERNATIONAL GmbH
- Address: Flinger Broich 203, 40235 Duesseldorf, Germany
- Product: Fast Li-lon battery charger “Könner & Söhnen”
- Type/Model: KS 22A-FC, KS 40A-FC, KS 37A-FC
The statement is based on a single evaluation of above mentioned products. It does not imply an assessment of the whole production and does not permit the use of the test lab. logo. The manufacturer should ensure that all product in series production are in conformity with the product sample detalied in this report. The applicant should hold the whole technical report at disposal of the competent all the right.
Applied EC Directives: 2014/30/EC Electromagnetic compatibility Directive (EMC)
- Directive 2011/65/EU (RoHS) as last amended by
- Directive (EU) 2015/863
Applied Standards
- EN 55035:2017
- IEC 62321-3-1:2013, IEC 62321-5:2013
- IEC 62321-4:2013+AMD1:2017, IEC 62321-7-1:2015,
- IEC 62321-7-2:2017, IEC 62321-6:2015,
- IEC 62321-8:2017
- EN 55032:2015
- EN 61000-3-3:2014
- EN 61000-3-3:2013
Issued Date: 2022-11-10
Place of issue: Duesseldorf
General director: Fomin P.
We DIMAX INTERNATIONAL GmbH hereby declare that specified above conforms covering European Parliament and Council Directives, Electromagnetic compatibility Directive (EMC) 2014/30/EC of 26 February 2014. The CE mark above can be used under the responsibility of manufacturer. After completion of an EC declaration of Conformity and compliance with all relevant EC directives.
CONTACTS
Deutschland
DIMAX International GmbH Flinger Broich 203 -FortunaPark- 40235 Düsseldorf,
Deutschland koenner-soehnen.com
Ihre BestellungenIhre Bestellungen
[email protected]
Kundendienst, technische Fragen Kundendienst, technische Fragen und
Unterstützungund Unterstützung [email protected]
Garantie, Reparatur und Service
Garantie, Reparatur und Service [email protected]
Sonstiges
[email protected]
Polska
DIMAX International Poland Sp.z o.o.
Polska, Warczawska, 306B 05-082 Stare Babice,
[email protected]