K nner S hnen KS 2100iG S Running Generator User Manual

June 8, 2024
K nner S hnen

K nner - logo1 Shnen KS 2100iG S Running Generator
User Manual

KS 2100iG S Running Generator

COMMISSIONING OF A INVERTER GENERATORS

RUNNING GENERATOR IN GASOLINE MODE FOR MODELS KS 2100iG S, KS 3100iG S

  1. Please read the operating manual carefully before getting started.
  2. Fill the engine with motor oil for gasoline engines SAE 10W-30 or SAE 10W-40.
  3. Check oil level.
  4. Check fuel level.
  5. Close the gas valve on the cylinder.
  6. Open the vent on the fuel cap to the “ON”.
  7. Turn the Multifunctional engineswitch to the “START” position (fig. 1).
  8. Pull the manual starter until a slight resistance is felt, then pull it toward you relatively sharply. Slowly turn the manual starter by hand, do not release it abruptly.
  9. Turn the Multifunctional ngineswitch to the “RUN” position.
  10. If the generator does not start after several attempts, please contact our customer support on the website: ks-power.de/en.

K nner - logo1

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

K nner S hnen User Manuals

Related Manuals