vtech RM5756HD 5 Inch Smart Wi-Fi 1080p Video Monitor User Guide

: June 9, 2024
: vtech

Table of Contents

RM5756HD 5 Inch Smart Wi-Fi 1080p Video Monitor
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RM5756HD 5 Inch Smart Wi-Fi 1080p Video Monitor

Baby unit: 2412 – 2472 MHz Parent unit: 2412 – 2472 MHz 13 5” Colour LCD (IPS 1280×720 pixels)
Actual operating range may vary according to environmental conditions at the time of use.
Baby unit power adaptor: Output: 5V DC, 1A. Parent unit power adaptor: Output: 5V DC, 2A. Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery

Technical specifications

Transmit frequency Channels LCD Nominal effective range Power requirement

RM5756HD
5″ Smart Wi-Fi 1080p Video Monitor
Quick start guide
Congratulations
on purchasing your new VTech product. Before using this baby monitor, please read the Important safety instructions.
What does HD Video Monitor do?
VTech 5″ Smart Wi-Fi 1080p Video Monitor allows you to stay close to your baby when you are on the move or away. This monitor is Wi-Fi enabled, using your home wireless network to stream live video and audio through the 1080p baby unit and 5-inch colour screen parent unit. It allows you to maintain a constant connection to your baby. You can also monitor from your smartphone or mobile tablet. VTech 5″ Smart Wi-Fi 1080p Video Monitor uses MyVTech Baby Pro app to let you instantly see and hear what’s happening with your baby from anywhere in the world. The app can be downloaded from the App Store or the Google PlayTM Store.

Important safety instructions

The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above.
4. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.
5. This product is not intended for use as a medical monitor.
6. Do not use this product near water, for example, near to a bath, sink, swimming pool or shower.
7. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage transportation. Disposal of battery in fire or a hot oven, mechanically crushing or cutting the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in instructions .
8. Use only the adaptors included with this product. Incorrect adaptor polarity or voltage can seriously damage the product.
Power adaptor information: Parent unit output: 5V DC 2A VTech Telecommunications Ltd. Model: VT07EUK05200 Baby Unit output: 5V DC 1A VTech Telecommunications Ltd. Model: VT05EUK05100

19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorised service facility. Disassembling or removing parts of the product other than via the battery door may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
20. You should test the sound reception every time you turn on the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time.
23. Children should be supervised to ensure that they do not play with the product.
24. The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach of children.
25. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
· Use and store the product at a temperature between 0oC and 40oC.
· Mishandling batteries can cause burn, fire or explosion hazards.
· Batteries should not be exposed to excessive heat such as bright sunshine or fire.
· Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.

Rechargeable battery information: 3.7V 5000mAh, 18.5Wh Lithium-ion battery Zhuhai Great Power Energy Co., Ltd. Model: GSP806090-5Ah-3.7V-1S1P 9. The power adaptor is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, underthe-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet (power adaptor) should be installed near the equipment and should be easily accessible.
11. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

·

Warning–Strangulation Hazard–Children

have STRANGLED in cords. Keep this cord out of

the reach of children (more than 0.9m away). Do

not remove this tag.

· Never place the baby unit inside the baby’s cot or playpen. Never cover the baby unit or parent unit with anything such as a towel or a blanket.

· Other electronic products may cause interference with your

camera unit. Try installing your camera unit as far away from

these electronic devices as possible: wireless routers, radios,

cellular telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless

telephones.

12. Do not modify the power adaptors or replace with other adaptors, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.

14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or electricity supply provider .

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat source.

18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.

What’s in the box
Your baby monitor package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Quick start guide

x 2

Requirements

For mobile access: MyVTech Baby Pro mobile app Network Wi-Fi router
Internet connection

Wi-Fi 2.4GHz 802.11 b/g/n
1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per baby unit

Download app for mobile access

1 Download the free MyVTech Baby Pro mobile app and install it to a
mobile device, then use your mobile device and the mobile app to monitor your baby remotely.
1. Press MENU/SELECT when the parent unit is idle.

2. Go to

Connect Mobile Phone.

3. Scan the QR code in the parent unit to download the app into your mobile device if you have not installed the app yet.
4. Follow the instructions in the mobile app to set up and pair your baby unit to the mobile app.

Alternatively, you can download the mobile app from the App Store or Google Play store.

Install MyVTech Baby Pro mobile app
1. Browse the App Store or the Google Play store . 2. Search for the mobile app with the keyword “myvtech baby pro”. 3. Download and install the MyVTech Baby Pro mobile app to your mobile device. OR Scan the QR codes on the right to get the app.

· Make sure your mobile device meets the minimum requirement for the mobile app.
Minimum requirement The mobile app is compatible with: · AndroidTM 6.0 or later; and · iOS 12 or later.
2 After installing the mobile app, follow the instructions in the mobile app and Parent
Unit to set up and pair your baby unit.
In your mobile device:
1. Tap to run the mobile app in your mobile device, and then create a user account. 2. We recommend that you use common webmail services, such as Google Gmail for
registration of your user account. Check your email (and Spam folder), and activate your new camera account via the email link, then sign in to your account. 3. Follow the instructions in the mobile app to pair the camera. Tap , then Add Camera in the mobile app to get started.

Protect your privacy and online security
VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-recommended best practices to help keep your wireless connection private and your devices protected when online. We recommend you carefully review and consider complying with the following tips. Ensure your wireless connection is secure. · Before installing a device, ensure your router’s wireless signal is encrypted by selecting
the “WPA2-PSK with AES” setting in your router’s wireless security menu. Change default settings. · Change your wireless router’s default wireless network name (SSID) to something unique. · Change default passwords to unique, strong passwords. A strong password:
– Is at least 10 characters long. – Is complex. – Does not contain dictionary words or personal information. – Contains a mix of uppercase letters, lowercase letters, special characters and numbers. Keep your devices up to date. · Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates. · If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router. · UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network.
For more information on wireless connections and protecting your data, please review the following resources from industry experts: 1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips
www.fcc.gov/consumers/guides/how-protect-yourself-online. 2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet www .us-cert.gov/ncas/tips/ST15-003. 3. Federal Trade Commission: Using IP Cameras Safely https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely. 4. Wi-Fi Alliance: Discover Wi-Fi Security http://www.wi-fi.org/discover-wi- fi/security.

Connect, charge and power on the baby monitor

Connect the baby monitor
· The rechargeable battery in the parent unit is built-in. · Use only the power adaptors supplied with this product. · Make sure the parent unit and the baby unit are not connected to an electronically controlled electric outlet. · Connect the power adaptors in a vertical or floor mount position only. The adaptor prongs are not
designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adaptors may not properly connect to the outlets. · Make sure the parent unit, the baby unit, and the power adaptor cords are out of reach of children.

Charge the parent unit battery before use The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, keep the parent unit connected to AC power.
· Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the parent unit battery is fully charged, the battery icon becomes solid .
· The standby time varies depending on your actual use.
The parent unit turns on automatically after connecting to the power socket, and the welcome screen appears. You can press Power to turn the parent unit on or press and hold to turn it off.

Slide the switch to ON to power on your baby unit.

· After powering up, the baby unit status LED will turn on and then turn off after a short time.
· The status LED is set to off by default. If you want to keep the LED on, press MENU, then go to

Status LED and turn it on.

WARM

NOTE: Camera lens and surface may get warm during normal operation.

The battery icon indicates the battery status (see the following table).

Battery indicators

Battery status

Action

alert displays on the parent unit screen, and the battery icon shows empty , with the LED light flashes. The battery icon becomes solid
.

The battery has very little charge and may be used for only a short time.

Charge without interruption (about 30 minutes).

The battery is fully charged. To keep the battery charged, connect it to AC power when in use.

Raise the parent unit antenna for better reception

Android TM and Google Play TM are trademarks of Google Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Credits: The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license. The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license. The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license. The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.

Overview
Baby unit overview
6 1 2 3 4 5

9

7

8

10

13 11 12

1 Light sensor

2 Camera lens

3 Infrared LEDs · Allow you to see clearly in a dark environment.

4 Microphone

5 Night Light

6

Night Light Control Key

· Go to Night Light section to learn more.

7

ON/OFF switch

· Power it on or off.

8 LED indicator · Steadily on, then off, when the baby unit is connected to the parent unit.
· Flashes when the baby unit is connecting with the parent unit, or the link to the parent unit has lost.
9 Speaker
10 Temperature sensor
11 PAIR · The parent unit and baby unit provided are already paired. · Reset the baby unit to factory default. 1. Press and hold PAIR key until you hear a beep sound. 2. Release the PAIR key, and then press the PAIR key again five times until you hear another beep sound. 3. The baby unit will sound another beep when the reset completes. Then, the baby unit will reboot.
12 Power jack
13 Wall mount slots

Parent unit overview

1 2 3 4 5 6 7
8 9 10

1 LINK LED light
· On when the parent unit is linked to the baby unit.
· Flashes when the link to the baby unit is lost.

2

LED light

· On when the parent unit is connected to AC power, and the battery is charging.

· Flashes when the parent unit battery is low and needs to be charged.

3 3- level sound indicator light · Green: low sound level is detected by the baby unit. · Green and amber: moderate sound level is detected by the baby unit. · Green, amber and red: high sound level is detected by the baby unit.
4 TALK / · Press and hold to talk to the baby unit. · While in a sub-menu, press to exit.

5 MENU | SELECT
· Press to enter the main menu. · While in a menu, press to choose an
item, or save a setting.

11

12 15
13
14

6

| | | Arrow keys

· Press to navigate left, right, up and down within the main and sub-menus.
· While viewing zoomed image, press to move the zoomed image leftward, upward, rightward or downward.

7 Microphone

8

|

· Increase or decrease parent unit volume.

9

Zoom

· Press to zoom in/out.

· While in a sub-menu, press to view the help menu.

10

Power | LCD ON/OFF

11 Antenna

12 Speaker

13 Power jack

14 RESET · Force reboot the parent unit.
15 Stand

Parent unit icons

Main Menu

Options

Night light

· Turn on or turn off night light. · Select a night light colour. · Adjust night light brightness. · Set a night light timer.

Melodies and soothing sounds

· Select to play all melodies, or play one of the five melodies and five soothing sounds.
· You can also set the timer to stop playing after 15, 30 or 60 minutes, or playing non-stop.

Alerts – Sound, motion and temperature

· Select the sound and motion sensitivity level.
· Turn on/off sound, motion and temperature detection alerts.
· Turn on/off Auto Wake Up function.

· Select maximum and minimum temperature for alert range.

Parent Unit settings

· Adjust parent unit screen brightness.
· Adjust Low Battery Alert Tone. · Adjust No Link Alert Tone. · Turn on/off Dim mode.

Baby Unit settings

· Turn on/off Night Vision. · Turn on/off baby unit Status LED. · Adjust baby unit speaker volume.

General settings
· Connect to home Wi-Fi network. · Connect mobile phone. · Reset Settings to factory default. · Software Update.

Status icons
Direct mode The parent unit and baby unit connect to each other directly. Red bars indicate no connection.
Router mode The parent unit and baby unit connect via the Wi-Fi network. The red icon on the baby unit or parent unit, indicates no connection between the respective unit(s) and the router.
Night vision is turned on.
Motion detection alert is turned on.

Sound detection alert is turned on.
Melodies and soothing sounds are playing.
Night light is turned on.
Auto night light brightness is activated.
Temperature alert is turned on.

Parent unit is muted.

21

Temperature (Blue: lower than 20°C; White: between 20-24°C; Orange:

higher than 24°C)

Battery level indicator.

Auto software and firmware update
To ensure that your HD video monitor is always at its best performance, the parent unit will prompt a message and ask you to update its software and the baby unit’s firmware when there are new versions available. Select “Now” to reboot the system, or switch off and on the parent unit later to reboot the system into the latest software. · To check if your device is running on the latest software, or to update your device
software, go to:

Software Update.
Connect your HD video monitor with home Wi-Fi network
· You must connect your video monitor to your secured home Wi-Fi network in order to receive the latest software and firmware updates. To set the Wi-Fi up, go to: > Configure Wi-Fi.
Note · Make sure the baby unit is on when you set up the Wi-Fi network.

Night Light

You can control the night light remotely on the parent unit or directly on the baby unit.

On the Parent Unit:

On the Baby Unit:

1. Press MENU.

2. Press or to scroll to

Night Light

menu, then press MENU or to enter.

3. Press or to choose below options:

Turn on/off night light Change night light colour Adjust night light brightness Set night light timer

Night Light Control Key Single Tap: Turn on/off Tap and hold: Adjust night light brightness

Basic operation

After powering up your baby monitor, the parent unit streams live video in direct mode. We recommend you follow the instructions on-screen to set up home Wi-Fi network with your monitor for functionality enhancements and mobile access. See Auto software and firmware update and Download app for mobile access in this Quick Start Guide.
Use the menu Press MENU on the parent unit to enter the main menu, choose a menu item, or save a setting. You can use the parent unit menu for advanced settings or operations, such as to play or stop the baby unit lullaby, or adjust the baby unit sound sensitivity.
While in the menu:
· Press | | | to scroll through the menu options.
· Press SELECT to select an item. · Press TALK to return to the live video. · Press to go to the Help & info page.

Adjust speaker volume

Press

|

to adjust the parent unit

speaker volume level received from the

baby unit.

Muted

Zoom

Press to zoom in or out in a fixed zoom

sequence.

indicates the image is

magnified 3 times.

Talk to your baby via the Baby Unit 1. Press and hold the TALK key. 2. When the icon displays on
screen, speak to your parent unit. Your voice is transmitted to the baby unit. 3. When finished talking, release the TALK key to hear your baby again.
Turn on/off Baby Unit’s status LED Turn on or turn off the baby unit status LED indicator. Go to:

Status LED.
Turn on/off the Parent Unit screen You can turn on or turn off the parent unit screen without powering off the unit. You will still hear sounds from the baby unit. · Press | LCD ON/OFF on the parent unit
to turn off the screen. · Press any key on the parent unit to turn
the screen on again.

To restore to the default settings or reset the Wi-Fi connection, you can reset the parent unit by pressing the RESET key at the back of the unit.
Insert a pin into the RESET hole on the back of the parent pnit, and then gently press the button inside.

Press and hold

Test the sound level and position the baby monitor

Testing the sound level of the baby monitor

· This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such.

· For hearing protection, make sure the parent unit is more than 1 metre away from the baby

unit. If you hear any feedback noise from the parent unit, move the parent unit further until

the noise stops. You can also press

on the parent unit to lower or mute the noise.

· Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit.

3. To avoid causing feedback noise from your baby monitor: · Make sure your baby unit and parent unit are more than 1 metre apart; OR · Turn down the volume of your parent unit.
Great>er1thmaentr3eft (1m)

13mm

Less<t1hamn e3tfrte(1m)

Positioning the baby monitor

· Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s cot or playpen.

1. Place the baby unit more than 1 metre away from your baby.

2. Adjust the angle of the baby unit to aim at your baby.

1 metre

test the location for the baby unit
If you plan to install your baby unit in a designated location, and use your home Wi-Fi network to connect your video monitor, you need to test which of your selected monitoring areas within the house have good Wi-Fi signal strength. After you have powered on your Parent Unit, you can use your Parent Unit Wi-Fi signal strength indicator to assist in checking. Once you have identified the suitable location, you can install your baby unit. Adjust the distance between your baby unit and the Wi-Fi router if needed.
· Depending on surroundings and obstructing factors, such as the effect distance and internal walls have on signal strength, you may experience reduced Wi-Fi signal. To improve the Wi-Fi signal strength, adjust the distance or direction of your Parent Unit. Check with your Parent Unit again.

mount the baby unit (optional)

Notes
· Check for reception strength and camera angle of the baby unit before drilling the holes.
· The types of screws and wall plugs you need depend on the composition of the wall. You may need to purchase the screws and wall plugs separately to mount your baby unit.

1. Place the wall mount bracket on a wall and then use a pencil to mark two holes in parallel. Remove the wall mount bracket and drill two holes in the wall (5.5mm drill bit).

2. If you drill the holes into a stud, go to step 3.
· If you drill the holes into an object other than a stud, insert the wall plugs into the holes. Tap gently on the ends with a hammer until the wall plugs are flush with the wall.

3. Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole first, so that the wall mount bracket position is fixed. You can tighten the other screw in the top hole.
4. Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Connect the power adaptor to the Baby Unit .

3. Insert the screws into the holes and tighten the screws until only 6.5mm of the screws are exposed.

OR

4. Place the baby unit on the wall

1

2

mount bracket, and then slide it

forward until it locks into place. Align

the holes on the wall mount bracket

with the screws on the wall, and slide

the wall mount bracket down until it

locks into place.

5. You can maximise your baby unit viewing angles by tilting the wall mount bracket. Hold the baby unit, and then rotate the knob in an anticlockwise direction. This will loosen the joint of the wall mount bracket. Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in a clockwise direction to tighten the joint and secure the angle.

How the system works

For better security and more stable connectivity, this baby monitor requires connecting to a Wi-Fi network and operating in Router mode connection.

Direct mode
Your baby monitor parent unit and baby unit connect to each other in Direct mode by default, which allows you to immediately stream video out of the box. It is NOT recommended to continue using Direct Mode connection after initial installation.

Local access, for starLtoucpalqaucicceksvs iew and setup stage.

Tip
You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are obstructing factors, such as internal walls, between them. You have to set up Router mode to connect the units via your home Wi-Fi network to improve the connection between your parent unit and baby unit.

Router mode
You are required to set up your monitor in Router mode to enjoy live video streaming via your parent unit with an enhanced connection. Router mode is the recommended mode for stable connectivity.

Mobile access

Router mode uses your home Wi-Fi

network to connect your video monitor.

It supports live video streaming through

the parent unit and smartphone app.

Connecting Wi-Fi to

If you want to stream live video remotely

enhance local access

with your mobile device, download and

install the MyVTech Baby Pro mobile app. With the mobile app, your Wi-Fi router (not included)

provides Internet connectivity to your HD video monitor system. It serves as a communicating

channel between your baby unit and mobile device, allowing you to monitor and/or control your

baby unit wherever you are. For more details, see Download app for mobile access section in this

quick start guide.

Note
· When both parent unit and app are viewing the camera simultaneously, the video quality will be optimised to deliver the best possible viewing result.

Scan to learn more on improving connectivity.

General product care
To keep this product working well and looking good, follow these guidelines: · Avoid placing it near heating appliances and devices that generate electrical noise (for example, motors or
fluorescent lamps). · DO NOT expose it to direct sunlight or moisture. · Avoid dropping the product or treating it roughly. · Clean with a soft damp cloth. · DO NOT immerse the parent unit and the baby unit in water and do not clean them under running water. · DO NOT use cleaning spray or liquid cleaners. · Make sure the baby unit and parent unit are dry before you connect them to the mains again.
Storage
When you are not going to use the baby monitor for some time, store the parent unit, the baby unit and the adaptors in a cool, dry place.
Adult supervision
· This baby monitor should be for use by adults only. · Do not place the baby unit inside the cot or playpen. · To ensure your children’s safety, do not allow them to touch or play with the baby monitor and its
accessories. THIS IS NOT A TOY.

Customer service and product warranty

PROD

ONE YEAR
UCT WARR

ANTY

PRODUCT WARRANTY
Thank you for choosing this quality product from VTech.

1. The product detailed above is covered by a one year warranty from the date of purchase, against any defects in materials or workmanship.
2. The product may be returned to the place of purchase. Alternatively the product can be returned to VTech Electronics Europe Plc (see address below), with proof of purchase, without proof of purchase no replacement will be provided.
3. VTech Electronics Europe Plc will examine the product and if it is found to be defective due to faulty materials or workmanship, will replace the product at their discretion.
4. If the product covered by this warranty is damaged due to misuse, modification or unauthorized repair, or because of faulty batteries, battery discharge or incorrect electrical connections, then this warranty becomes void.
5. This warranty is personal to the original purchaser and is not transferable.
6. Breakages to the LCD screen are not covered by the warranty.
7. Products returned to VTech Electronics Europe Plc, should be sent to the address shown below and packed carefully to avoid damage in transit. Please do not include batteries or adaptors. Please include details of the fault together with your name and address, contact phone number and/or email address.
8. To keep an online record of your warranty, please register your product online at www.vtech.co.uk/clubvtech

VTech Electronics Europe Plc, c/o XPO Logistics, Warehouse 350, Cat & Fiddle Lane, West Hallam, DE7 6HE
THIS WARRANTY IS OFFERED AS AN EXTRA BENEFIT AND DOES NOT AFFECT CONSUMERS’ STATUTORY RIGHTS.

This warranty is valid for the UK and Ireland only. For products purchased outside the UK and Ireland, please contact your local distributor or place of purchase.

IMPORTANT Please retain this booklet with your sales receipt as proof of the date of purchase.
Customer Service Please visit www.vtechphones.eu to contact our Customer Service Department.

Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health. The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pn) set out in Battery Directive (2006/66/EC). The solid bar indicates that the product was placed on the market after 13th August, 2005. Help protect the environment by disposing of your product or batteries responsibly.
Declaration of Conformity
This product is intended for use within Europe and UK. This equipment complies with the essential requirements to EU’s Radio Equipment Directive (2014/53/EU) and the UK’s Radio Regulations 2017 on radio systems and telecommunication equipment. VTech Telecommunications Ltd. hereby declares that this Video Monitor RM5756HD is in compliance with the essential requirements and other relevant provisions of EU’s Radio Equipment Directive (2014/53/EU) and UK’s Radio Equipment Regulations 2017. The Declaration of Conformity for the RM5756HD is available from www.vtechphones.eu.
Manufacturer: VTech Telecommunications Ltd. 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting kok Road, Tai Po, Hong Kong. Importer: VTech Electronics Europe Plc Napier Court, Abingdon Science Park, Abingdon, Oxon, OX14 3YT, U.K.