CONDUCTIX Wireless Charger 3.0 Installation Guide
- June 8, 2024
- CONDUCTIX
Table of Contents
CONDUCTIX Wireless Charger 3.0 Installation Guide
Powerful | Reliable | Efficient
Wireless Charger 3.0 is a highly efficient power transfer system, by inductive means, ideal to provide electric power to charge batteries. Wireless Charger 3.0 meets the ever increasing requirements modern logistic solutions ask for. Offering best-in-class charging to fully automated transport solutions, being very robust, having no vulnerable contact surfaces, providing high efficiency Wireless Charger 3.0 allows highly dynamic and flexible transport solutions, especially when applying automated Opportunity Charging. With virtually no mechanical Wear & Tear, all this comes with an extremely competitive Total Cost of Ownership, compared to other solutions traditionally considered to provide power transfer
- Plant Control System
- Vehicle Control System
- Battery Management System
- Battery
Wireless Charger 3.0 is providing implementation freedom
There is no preferred or required mounting orientation for the pads. Depending
on vehicle design, available installation space and building structures in the
operational environment the chargers can be installed horizontally or
vertically
Conductix-Wampfler Batteries
The ideal complement for Wireless Charger 3.0
The IPS (Inductive Power Supply), is the heart and the brain of the Wireless Charger 3.0. It converts the 50 or 60 Hz mains frequency into a high frequency allowing highly efficient power transfer
The ISP (Inductive Stationary Pad), includes the sending coil for the power transfer and inductive communication. Horizontal and vertical arrangements are possible.
The IMP (Inductive Mobile Pad), is the matching counterpart to the ISP. Design and build are widely identical to the ISP. The IMP comes with a cable connection that can be easily cut to length.
The MPU (Mobile Power Unit) is taking up the current induced in the IMP and provides a stable DC output towards the battery. The output voltage range is 21 to 59 V DC. The wireless charger can charge on demand when communication to the battery management system is active, or to set values when no communication is present.
Conductix-Wampfler has just one critical mission: To provide you with energy and data transmission systems that will keep your operations up and running 24/7/365. To contact your nearest sales office, please refer to: www.conductix.contact