momi Balance Bicycle Nash Turquoise Instruction Manual

momi Balance Bicycle Nash Turquoise

Dear Customer,
Thank you very much for purchasing the MoMi MIZO bicycle. We hope that the purchased product meets your expectations.
If you have additional questions, please contact us via the website www.momi.store
For the safety of children, please read the manual carefully and follow its recommendations in order
to use the product safely. The person performing the assembly must be an adult, who will use all the components of the product in accordance with the instruction manual and their intended use in order to prevent injuries.

IMPORTANT
Remember to remove and throw away all the packaging elements that were attached to the product, so that they do not remain within the reach of a child (e.g. cardboard elements, plastic films, etc.).
This could cause a risk of harm, e.g. choking on the child, suffocating for the child. We recommend that you keep this manual for future reference, to read, if necessary, what to do in the event of an emergency or for proper maintenance.

PLEASE NOTE
Drawings and photos are for reference only. The actual appearance of the product may differ from the visualization in the manual.

WARRANTY

The manufacturer gives a 2-year warranty for the product.

WARRANTY EXCLUSIONS AND LIMITATIONS
We are responsible for the quality of our products. Our warranty does not include damages caused by improper use of the product or mechanical damages.

TAKE CARE OF THE ENVIRONMENT:
When you stop using the product, please dispose of it at an appropriate facility in accordance with local laws.
IMPORTANT! PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE SAFETY NOTES AND PRECAUTIONS WARNING.

WARNINGS

• Protective equipment should be worn (helmet, elbow pads, knee pads, etc.).
• Not to be used in traffic. Not suitable for use on public highways.
• The bike shall be used with caution since skills are required to avoid falls or collisions causing injury to the user or third parties.
• The product is intended for children over 3 years of age.
• Not suitable for children under 3 years old since the child at that age is not strong enough.
• This toy has no brake.
• The bike is to be used only on flat and dry surfaces without any obstacles. Do not use on climbs and slopes, around traffic, on wet or gravel surfaces.
• Do not use around any body of water (rivers, pools, etc.) and other obstacles.
• The product has to be used under adult supervision.
• The product has to be assembled by an adult. Keep all the parts of the product away from children while assembling the product. Keep the manual for future reference.
• A child should be instructed on how to use the product properly. Please make sure that the child is physically capable of controlling the bike and knows how to slow down and stop.
• The bike should be checked and maintained regularly. Before each use make sure that the bike is intact and that there are no loose parts or missing elements.
• Before using make sure that all bolts are securely tightened and that all components are securely installed.
• If any elements are missing or broken do not use the bike. Only use original parts for the bicycle.
• Do not use it in the dark and in bad weather. Do not use the bike around stairs and steps.
• Do not drag the bike around from a bumper of a car or other vehicle.
• The bike is fit for one person. The bike can be only used by one person at a time.
• It is crucial to make sure that while riding the bike child do not take their hands off the handles. Riding a bike with no handlebars can cause serious injuries for the child.
• The maximum capacity of the bike is 25 kg.

COMPONENTS

• A. Fork of the handlebar x1
• B. Frame x1
• C. Saddle height adjustment hoop x1
• D. Footrests x2
• E. Wheels x2
• F. Handlebar x1
• G. Seat x1
• H. I. J. K. L. Handlebar mounting hoops x2
• M. Screw cap x1
• N. Hex key x1
• O. Screw for handlebar mounting x1
• P. Screws for wheel mounting x4
• Q. Metal ring X2
• R. Wheel overlay X4

INSTALLATION

1. Place the overlays (R) and the metal rings (Q) on both sides of the rear wheel’s (E2) rod. Insert the wheel in the holes in the frame’s rear end. Next, place screws (P) in the holes from the outside, and turn them with a hex key to maximum resistance (fig. 1, 2, 3, 4, 5)
2. Place the hoops on the fork of the handlebar in the following sequence: L, K, J, I, H as seen in the illustration (fig. 6).
3. Place the fork of the handlebar in the hole located in the front part of the frame (fig. 7).
4. Place the rest of the hoops in the fork in the following sequence: H, I, J, K, L (fig. 8).
5. Place the handlebar on the very top of the fork as seen in fig. 9. Insert the screw (O) in the hole placed in the handlebar and turn it with the hex key. Next, place a cap on the turned screw (M).
6. Place the overlays (R) on both sides of the front wheel’s (E1) rod. Place the front wheel in the holes placed in the fork. Next, put the rest of the screws (P) in the holes and turn them with the hex key to the maximum resistance (fig. 14). To make installation of the front wheel easier you can turn the bike so that the handlebar is on the floor.
7. Loosen the screw in the saddle’s mounting hoop (C). Next, install the saddle by inserting a tube into the frame (fig. 15). Adjust the height of the saddle to the height of your child. A correct position is when both feet of a sitting child comfortably reach the floor. Next, turn the screw and close the clasp.

ATTENTION: Before a child starts using the product make sure that all the screws are secured tightly.
ATTENTION: Make sure to check and turn all the screws in the bike regularly.
NOTE: Make sure your child uses protective measures such as a helmet, elbow pads, knee pads and appropriate footwear.

PRODUCT MAINTENANCE

• The condition of the bicycle should be checked regularly.
• Cleaning and maintenance of the bicycle must be performed only by an adult.
• The product should be cleaned with a damp cloth or sponge. Protect against dust, moisture, water, high and very low temperatures, and dropping etc. Periodically check the tightness of screws and other parts. Use only certified spare parts. Keep the bike in a dry place. Prolonged exposure to direct sunlight can bend plastic parts.
• Before each use of the bike, you should carefully check whether the bike is not damaged and whether all screws securing the individual elements of the bike are properly tightened. Worn or damaged elements should be replaced with new ones at an authorized service center.
• Use only original spare parts available from the manufacturer.

Thank you for reading the manual. Please keep it for future reference.
www.momi.store

Producent/Producer/Hersteller/Producteur:
TelForceOne S.A., ul. Krakowska 119, 50-428 Wrocław, Poland

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>