dyson N308C Airwrap Multi Styler Hair Curlier User Manual
- June 5, 2024
- dyson
Table of Contents
Dyson airwrap log
User manual
In the box
Some attachments may not be included.
You can buy additional attachments at
www.dyson.com/mynewairwra
Getting started
Using your attachment
Connecting the attachment
Turn attachment into the main body until it fits securely
Changing attachments
To change attachment, pull down on the switch to release
Cool touch tip
During use, the Airwrap™ barrels, Round volumizing brush, and Coanda smoothing
dryer will get hot. To change to another attachment, hold the tip.
Take care when handling hot attachments
Hold the attachment only in the area indicated.
Some attachments may need occasional cleaning.
For more information, go to
www.dyson.com/mynewairwrap
Pre-styling
Coanda smoothing dryer
Before curling, pre-dry the hair until almost dry.
Comes with two modes (i) drying and (ii) smoothing.
Use the cool tip to switch between the two modes.
Curling
Barrels
Step 1
Take a section of hair and bring the barrel towards the tips. Hair will start
to wrap around the barrel.
Step 2
Move the styler towards the head, no need to twist. Hold for 15 seconds or
until dry.
Step 3
Press cold shot for 5-10 seconds to set the curl. Switch off to release.
To change the curl direction, rotate the cool tip.
Shaping
Smoothing brushes
Step 1
Rough-dry hair with Coanda smoothing dryer.
Step 2
Use a Smoothing Brush to brush from root to tip.
Tips:
For volume, the face bristles outwards.
Turn the brush inwards at the ends to create a shape.
Smoothing
Coanda smoothing dryer
Rotate the cool tip to select Smoothing mode.
Press against the hair to switch airflow direction.
Step 3
Use dry hair to hide flyaways.
Position against hair until it attracts then slowly run down to tips.
For use on dry and straight hair.
How to use the contact bar
Position the contact bar against the head until you hear a click and hair
attracts.
Run from root to tip to hide flyaways.
Regular filter maintenance
The filter must be cleaned when the white LED starts flashing.
Ensure that you unplug your appliance from the mains electricity supply and
allow it to cool down before cleaning your filter.
The Dyson Airwrap™ multi-styler has highly tuned technology to give
outstanding performance.
This technology needs to be kept free from dust and hair product residue.
Maintenance is required to maintain performance.
Step 1
Slide the filter cleaning brush over the cable and onto the filter cage.
Using a rotating action, clean the filter cage thoroughly.
Remove the filter cleaning brush.
Step 2
Hold the handle of your appliance and pull the filter cage downwards, onto the
cable.
Gently pull open the filter cage and slide it off the cable.
Step 3
Wash the filter cage under a warm, running tap.
Step 4
Shake the filter cage to remove the majority of the excess water, then leave
it to dry naturally.
Step 5
Using a rotating and up and down action, clean the filter mesh with the filter
cleaning brush until all the debris has been removed.
Do not use water or chemicals to clean the filter mesh.
Step 6
Gently pull the filter cage open and slide it onto the cable.
Slide the filter cage towards the handle and twist until it snaps into place.
SV12 JN.00000 PN.000000-00-00
00.00.00 VERSION NO.01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>