CONDUCTIX wampfler 0811 Conductor Rail System Single FlexLine User Guide
- June 3, 2024
- Conductix Wampfler
Table of Contents
CONDUCTIX wampfler 0811 Conductor Rail System Single FlexLine User Guide
NOTICE
The animations do not replace the Installation Instruction. Please refer also
to our Technical Documentation („BAL0811-0001“ und „MV0811-0018“)!
SingleFlexLine 0811 Conductor Rail System
Please click the hyperlink or scan the code to start each animation:
System Overview SingleFlexLine 0811: MOV0811-0001
Cutting Rail and Producing Notch for Connector: MOV0811-0002
Mounting Hanger Clamps (clip-in, screwable and turnable): MOV0811-0004
Mounting End Cap Bars: MOV0811-0005
Connecting Rails and Mounting Line Feed: MOV0811-0006
Mounting and Adjusting Expansion Unit: MOV0811-0007
Mounting Anchor Points with pins (081133): MOV0811-0008
Drilling Jig for Anchor Point with Pin: MOV0811-0014
Mounting Screwable Anchor Points (081131/081132): MOV0811-0009
Current Collector Tolerances: MOV0811-0010
Mounting the Air Gap Insulation Section: MOV0811-0011
Mounting Towing Bracket: MOV0811-0012
Mounting the Outrigger: MV0811-0013
Conductix-Wampfler GmbH
Rheinstraße 27 + 33
79576 Weil am Rhein – Märkt
Germany
Phone: +49 (0) 7621 662-0
Fax: +49 (0) 7621 662-144
info.de@conductix.com
www.conductix.com
Importer for the United Kingdom:
Conductix-Wampfler Ltd.
1, Michigan Avenue
Salford
M50 2GY
United Kingdom
Phone: +44 161 8480161
Fax: +44 161 8737017
info.uk@conductix.com
www.conductix.com