HUAWEI M0004 FreeLace Wireless Earphone Bluetooth User Guide

HUAWEI M0004 FreeLace Wireless Earphone Bluetooth

Product Information

Specifications:

• Model: M0004
• Features: Touch controls, Bluetooth connectivity, noise cancellation modes
• Connectivity: Bluetooth, USB-C port
• Compatibility: Phones/tablets running EMUI 11/HarmonyOS 2 or later

Product Usage Instructions

Appearance:
The earphones consist of ear tips, touch control area, volume buttons, USB-C port, an indicator, function button, and power switch.

Power-on/off:
To power on, flip the Power switch to expose the green dot. To power off, expose the red dot. Hold down the Function button for 10 seconds to reset.

Pairing and Connections: Bluetooth Connection

1. Hold down the Function button for 2 seconds until the indicator flashes white.
2. Enable Bluetooth on your device and pair with HUAWEI FreeLace Pro 2.

Pairing via HUAWEI HiPair:
Connect the earphones to your device via the USB-C port and follow the onscreen instructions.

Shortcut Controls:

• Function button: Play/pause audio, skip tracks, answer/end calls.
• Volume buttons: Adjust volume levels.
• Touch control area on left earphone: Switch between noise cancellation modes.

Selecting Ear Tips:
Choose ear tips that fit best for noise cancellation. Follow the instructions for attaching ear tips to the earphones.

Downloading and installing the app

Scan the QR code to download and install the HUAWEI AI Life app, where you can try out more features and customize the settings for your earphones.

Appearance

1. Ear tip
2. Touch control area
3. Volume up button
4. Function button
5. Volume down button
6. USB-C port
7. Indicator
8. Power switch

Only the left earphone supports touch controls

Power-on/off

• Power-on: Flip the Power switch to expose the green dot. The earphones will automatically enter Pairing mode when powered on for the first time.

• Power-off: Flip the Power switch to expose the red dot.

• Hold down on the Function button for 10 seconds until the indicator flashes red. The earphones will be restored to their factory settings and then restarted.

• Power off the earphones or attach them to save power when you are not using them.

Pairing and connections

Method 1: Bluetooth connection

1. Hold down on the Function button for 2 seconds until the indicator flashes white.
2. Enable Bluetooth on your phone/tablet, then search for and pair with HUAWEI FreeLace Pro 2.

Method 2: Pairing via HUAWEI HiPair
Enable Bluetooth on your phone/tablet, connect the earphones to your phone/tablet via the USB-C port, and follow the onscreen instructions to complete the connection.

HUAWEI HiPair is only supported on phones/tablets running EMUI 11/HarmonyOS 2 or later.

Method 3: Magnetic switch
The earphones will disconnect when attached magnetically, and automatically reconnect when separated from each other.

Magnetic switch requires that the earphones have been paired with your phone/tablet, powered on, and are not being charged.

Shortcut controls

You can also enable/disable the touch control feature in the HUAWEI AI Life app.

Selecting a pair of ear tips and putting on the earphones

The earphones come attached with the M-sized pair of ear tips, but you can switch to another pair that better fits your ears and offers optimal noise cancellation effects (the following uses the left earphone as an example).

• The outside of the ear tip is marked with S, M, or L to indicate the size, and the inside is marked with L (left) or R (right).
• The tighter the fit, the better the noise cancellation performance.

1. To remove the ear tip from the earphone, hold the earphone with one hand and pull out the ear tip with Your other hand.
2. Select appropriately sized ear tips, align the ear tip with the earphone in the direction shown in the figure, and push the ear tip leftwards so that the hook on the earphone snaps into the ear tip’s groove.
3. Make sure that the ear tips are securely attached.
4. Put on the earphones and rotate them as needed to get the most comfortable fit.

Charging

Connect the earphones to the USB-C port on your phone, tablet, or other devices, to begin charging the earphones (your phone, tablet, or other devices will need to support On-The-Go (OTG) reverse charging). You can also charge the earphones with a USB-C adapter

Safety Information
Before using and operating this device, read the following precautions to ensure an optimal device performance and avoid dangerous use or unauthorized operations.

• To protect your hearing, do not listen to audio at a high volume for a long period of time.
• Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and hearing aids. When using the product, keep it at least 15 cm away from such medical devices. Consult the manufacturer of your medical equipment for more information.
• Ideal temperatures: 0°C to 35°C for operating; -20°C to +45°C for storage.
• Ensure that the power adapter meets the requirements of IEC/EN 62368-1 and has been tested and approved according to national or local standards.
• Observe all local traffic laws and regulations while using this product. Do not use this device when you are driving.
• Keep this device and its accessories that may contain small components out of the reach of children. Otherwise, children may damage this device and its accessories by mistake, or swallow the small components, which may cause choking.
• Avoid using the device in dusty, damp, or dirty environments, or near sources of magnetic interference.
• Avoid disassembling or modifying your device and its accessories. Unauthorized disassembly and modifications may result in voiding the factory warranty. If your device is faulty, visit an authorized Huawei Customer Service Center for assistance.
• Your device meets the requirements of IP55 (IEC 60529).

Warning:

• This device contains a coin, button, or small-sized cell battery. Do not swallow the battery, as it constitutes a chemical burn hazard.
• If the coin, button, or small-size cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Keep the battery away from fire, excessive heat, extremely low air pressure and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
• Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injury. The built-in battery in your device should be serviced by Huawei or an authorized service provider.

Precautions

• If you experience any skin irritation while wearing the earphones, remove them and clean them thoroughly. If the issue persists, seek advice from a medical professional.
• Enabling noise cancelling may affect your awareness of surrounding sounds and alarms. Ensure that you are in a safe environment when using this Vfunction.
• This device’s firmware will automatically update whenever it connects to a previously paired Honor device (released before the end of 2020) or a previously paired Huawei device, and Wi-Fi or mobile data is enabled. You can disable automatic firmware updates in Settings.

Disposal and recycling information
This symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service, or visit the website https://consumer.huawei.com/en/.

EU Regulatory Conformance
Hereby, Huawei Device Co., Ltd. declares that this device M0004 is in compliance with the following Directive RED 2014/53/EU, RoHS 2011/65/EU, EU
REACH regulation, and Batteries (where included) directive.
The full text of the EU declaration of conformity and most recent information about accessories & software are available at the following internet address:
https://consumer.huawei.com/certification.

Frequency Bands and Power
Bluetooth: 2.4 GHz 17 dBm.

RF Exposure Information
For the countries that adopt the SAR limit of 2.0 W/kg over 10 grams of tissue. The device complies with RF specifications. The highest reported SAR value: Body SAR: 0.487 W/kg.

Legal Notice
Copyright  Huawei Device Co., Ltd. 2024. All rights reserved. All contents in the documents in the packaging box, including but not limited to information about and portrayals of the appearance, colour, size, and supported features of the product (the latest features will come with software updates), are for reference only. The actual product may vary. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of this mark by Huawei Technologies Co., Ltd. is under license. Huawei Device Co., Ltd. is an affiliate of Huawei Technologies Co., Ltd.

Privacy Protection
To better understand how we protect your personal information, please see the privacy policy at https://consumer.huawei.com/privacy-policy, or read the privacy policy and service terms using the corresponding app.

Software License Agreement
Please read the software license agreement carefully before using this device. By using the device, you indicate that you agree to be bound by the license agreement. To read the agreement, please visit the following website: https://consumer.huawei.com/en/legal/eula/.

Open Source Software Notice
For the open-source software statement of your device, please visit https://consumer.huawei.com/en/opensource/ and search for the device name.

FAQ

Q: How do I reset the earphones?
A: Hold down the Function button for 10 seconds until the indicator flashes red to reset the earphones.

Q: Can I use the earphones with devices not running EMUI 11/HarmonyOS 2?
A: Yes, you can connect via Bluetooth, but HUAWEI HiPair functionality is limited to compatible devices.

References

• Huawei - Building a Fully Connected, Intelligent World
• Huawei Türkiye
• Certification | Legal | HUAWEI Global
• HUAWEI Global
• Software License - HUAWEI Global
• 【Huawei Open Source Release Center】 - Huawei Support - Huawei Official Site
• HUAWEI Polska
• banner

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>