solar-powered Metal Deck Lights User Guide

solar-powered Metal Deck Lights

IMPORTANT: Read all instructions carefully before use.

ABOUT THE SOLAR POWERED LED DECK LIGHT

Your MAXSA Solar Powered Metal Deck Lights convert sunlight into electricity during the day, enabling the 2 LED lights to turn on automatically at night. These Metal Deck Lights are perfect for lighting the edges and corners of your deck and they help prevent falls or tripping. You can also use them to light up your steps. They are solar powered. The included rechargeable battery gets powered up each day by the sun and lights up your deck or steps at night.
Your Solar Powered Metal Deck Light can light for up to 5 hours when the battery is fully charged. The sealed rechargeable AAA Ni-MH battery included with this product should last for many years before it needs to be replaced.

INCLUDED PARTS

Carefully remove and identify all the parts from their protective packaging and lay them out in front of you.

Your Solar-Powered LED Metal Deck Light comes complete with 4 LED light units and 8 screws

CHOOSING A LOCATION

Your Solar Powered Metal Deck Light comes complete with a built-in solar panel. For optimum sun exposure and longer light output, place the Solar Metal Deck Light where it will receive 6-8 hours of direct sunlight per day. Placing the product in a shaded location will not allow the batteries to charge fully, reducing the number of hours the light will operate per evening.
The Solar Powered Metal Deck Light is equipped with a power button and a light-sensitive trigger to automatically turn the light on at dusk.
For best performance, ensure that the Metal Deck Light is not placed near night time light sources such as porch lighting and street lighting. Click the power button to turn the light on, then it will automatically activate when it gets dark enough.

HOW TO INSTALL

Mount to a deck rail, edge or step. Take the two screws supplied with this product and install the Solar Metal Deck Light onto a wooden step, edge or deck railing and the light is ready to go! Make sure the screws are in the orientation you wish to mount the light and they are 23/8″ apart. Be sure to click the power button to turn the light on. Once it is on, it will activate automatically when it gets dark enough. You can also lay it on flat surfaces without mounting it!

There is a power button on the back of the Solar-Powered Metal Deck Light. The photosensor that senses when to turn the light on is located in the solar panel, so the panel should not be covered by anything and not in shadow to ensure the unit does not turn on during the daytime. You must click the power button to allow the light to activate automatically at night. If it does not come on at night, try clicking the power button once.
If the Metal Deck Light still does not light up long enough try and position
it somewhere it gets more sun during the day.
NOTE: The light will actually only illuminate if the power button has been pressed and it is dark out. If you are unsure if the power button has been pressed, you can cover the solar panels and see if the light turns on, you can take it to a dark area to see if the light turns on, or you can wait until evening to see if the light turns on.

MAINTENANCE

The LED lights in your Solar Metal Deck Light will last up to 30,000 hours and should never need replacement.
To keep your Solar Metal Deck Lights looking new, keep the solar panel free of dust and deposits by wiping occasionally with a dry cloth or with warm soapy water if necessary. A dirty solar panel will not allow the batteries to fully charge and this will shorten the life of the batteries and may cause the light to malfunction.

CHANGING THE BATTERY

The included AAA Ni-MH should last for at least 3 years. If you do need to change the battery, unscrew the screws on the back of the Metal deck light. This will expose a plastic cover. Carefully pull this cover out of the light and you will have access to the battery. Once the battery is replaced, you can snap the plastic cover back in place and replace the metal backing with the screws.

TROUBLESHOOTING

in direct sunlight for a full sunny day. Artificial light will not charge the battery. It must charge in sunlight.
Check to see that the solar panel receives 6-8 hours of sunlight per day, enabling the batteries to fully charge.
Check to see that the Solar Metal Deck light is not near night time light sources such as street lights or porch lights.
Click the power button once to ensure the light is on.
Light turns on during the daytime| The photosensor may be covered or in shadow. Be sure nothing covers the Solar Metal Deck Light so the photosensor can determine the proper time to turn the light on.
Light is not as bright as normal| Battery charge may be low. Check to make sure the solar panel is not covered and that the light is not turning on during daylight hours. Give it a full sunny day to recharge.

1 YEAR LIMITED WARRANTY

1 YEAR LIMITED WARRANTY: MAXSA Innovations, LLC warrants to the original consumer/purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for a period of one (1) year from the date of original purchase for use. When the original consumer/purchaser returns the product pre-paid (consumer pays return shipping) to MAXSA Innovations, LLC, 8412 Cathedral Forest Dr; Fairfax Station, VA 22039; USA within the warranty period, and if the product is defective, MAXSA Innovations, LLC will at its option repair or replace such. This warranty shall constitute the sole liability of MAXSA Innovations, LLC concerning the product. MAXSA Innovations, LLC expressly disclaims all other warranties INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO PERSON, FIRM, OR COPORATION IS AUTHORIZED TO ASSUME FOR MAXSA Innovations, LLC ANY OTHER LIABILITY IN CONNECTION WITH THE SALE AND USE OF THE PRODUCT. MAXSA Innovations, LLC and agents and distributors will bear no liability whatsoever for incidental or consequential damages or charges of any kind. Some states do not allow the reclusion or limitation of incidental or consequential damages, so the above disclaimer regarding incidental or consequential damages may not apply to you. This warranty is void if the product has been damaged or tampered with or if the product or any such parts have been opened. In all cases of damage during shipment, a claim must be filed with the shipping carrier and not with MAXSA Innovations, LLC.
This warranty gives you specific legal rights; you may also have other rights which vary from state to state. Please save these instructions for future reference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>