MONOPRICE 43249 Harmony Reuleaux Portable Bluetooth Speaker User Manual

MONOPRICE 43249 Harmony Reuleaux Portable Bluetooth Speaker

Harmony Reuleaux Portable Bluetooth° Speaker

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.

• Avoid prolonged exposure to excessive volume levels, which could cause hearing damage. Reduce the volume to minimum before using this speaker, then increase the volume toa comfortable listening level.
• Do not expose this device to excessively high temperatures. Do not place it in, on, or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
• This device contains a Lithium battery. Dispose of this device only in accordance with local, state, or federal regulations for electronic waste.
• Charge the battery before first use and at least once every1 months to keep it fresh and capable of holding the full charge.
• Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
• This device has no user serviceable parts. Do not attempt to open, service, or modify this device

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement.

• 1x Bluetooth® Speaker
• 1x USB Type-C® Charging Cable
• 1x 3.5mm Audio Cable
• 1x User’s Manual

PRODUCT OVERVIEW

1. . Microphone
2. Play/Pause/Phone Button
3. Volume-/Previous Track Button
4. Volume+/Next Track Button
5. Power Button
6. LED Indicator
7. USB-C® Charging Port
8. 3.5mm Audio Jack

CHARGING

Charge the battery before first use and at least once every three months to keep it fresh and capable of holding the full charge. Perform the following steps to charge the battery in the speaker.

1. The speaker will emit a beep every few seconds when the battery is low and needs charging.
2. Plug one end of the included USB Type-C® Charging Cable into the USB-C® Charging Port on the speaker, then plug the other end into a USB power source, such as a computer, wall charger, or power bank (available separately). The LED Indicator illuminates red while charging is in progress. It will take about 4 hours to fully charge the battery.
3. When the LED Indicator turns off, the battery is fully charged. Unplug the USB Type-C Charging Cable from the USB power source, then unplug it from the speaker. Store it in a safe place for future use.

BLUETOOTH PAIRING

Perform the following steps to pair your device with the speaker. Note that the speaker cannot enter Bluetooth® mode if an audio cable is plugged into the 3.5mm Audio Jack.

1. With the speaker powered off, press and hold the Power Button for 2 seconds to turn the speaker on. The LED Indicator will begin flashing blue and you will hear a tone, indicating that the speaker is in Bluetooth pairing mode.
   Note that if a device has already been paired, is powered on, and is within range, the speaker will reconnect with that device automatically. To pair the speaker with another device, delete he pairing on the other device, turn the speaker off by pressing and holding the Power Button
   for 2 seconds, then repeat step 1.

2. Open the Bluetooth® settings on your device.

3. Locate and select the MP43249 entry. If prompted for a passcode, enter 0000 (four zeros).

4. Once your device has paired and connected, the LED Indicator will stop flashing, it will then illuminate solid blue and a tone will be heard.
   Note that if a device is not paired with the speaker within 10 minutes, it will exit Bluetooth pairing mode. Repeat the above steps to pair it with a device.

OPERATION

• With the speaker powered off, press and hold the Power Button for 2 seconds to turn the speaker on.
• With the speaker powered on, press and hold the Power Button for 2 seconds to turn the speaker off.
• Momentarily press the Play/Pause/Phone Button to Pause or Resume playback.
• When an incoming call is received, momentarily press the Play/Pause/Phone Button to answer the call.
• When an incoming call is received, press and hold the Play/Pause/Phone Button to reject the call.
• With a call in progress, momentarily press the Play/Pause/Phone Button to hang up.
• Momentarily press the Volume+/Next Track Button to increase the volume level.
• Momentarily press the Volume-/Previous Track Button to decrease the volume level.
• Press and hold the Volume+/Next Track Button to skip ahead to the next track.
• Press and hold the Volume-/Previous Track Button to skip back to the previous track.

Notes:

• The playback and volume controls only function when using a Bluetooth® connection with a device that supports the AVRCP and A2DP Bluetooth profiles.
• The phone controls only function when using a Bluetooth connection with a device that supports the HFP Bluetooth profile.

WIRED CONNECTION

If your device does not support Bluetooth, you can use a wired connection with the speaker. Plug one end of the included 3.5mm Audio Cable into the 3.5mm Audio Jack on the speaker, then plug the other end into the headphone output on your device. The LED Indicator will slowly flash blue, indicating that the speaker is in AUX mode.
Note that the playback and volume controls will not function in AUX mode.

SPECIFICATIONS

TECHNICAL SUPPORT

Monoprice™ is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com or through email by sending a message to tech@monoprice.com. Check the website for support times and links.
To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and type the P/N into the search bar. If available, support files are linked at the bottom of the product page.

REGULATORY COMPLIANCE

Notice for FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU Conformity with applicable directives This equipment complies with the essential requirements listed below:

• Radio Equipment Directive (RED) 2014/53/EU
• RoHS 2 Directive 2011/65/EU with Directive (EU) 2015/863

UK Conformity with the relevant Union harmonization legislation This equipment complies with the essential requirements listed below:

• Radio Equipment Regulations 2017
• Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc

References

• HDMI Cable, Home Theater Accessories, HDMI Products, Cables, Adapters, Video/Audio Switch, Networking, USB, Firewire, Printer Toner, and more! - Monoprice.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>