MONOPRICE Harmony Capsule 300 Portable Bluetooth Speaker User Manual
- June 8, 2024
- Monoprice
Table of Contents
MONOPRICE Harmony Capsule 300 Portable Bluetooth Speaker
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.
- Avoid prolonged exposure to excessive volume levels, which could cause hearing damage. Reduce the volume to minimum before using this speaker, then increase the volume to a comfortable listening level.
- Do not expose this device to excessively high temperatures. Do not place it in, on, or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
- This device contains a Lithium battery. Dispose of this device only in accordance with local, state, or federal regulations for electronic waste.
- Charge the battery before first use and at least once every three months to keep it fresh and capable of holding the full charge.
- Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
- This device has no user serviceable parts. Do not attempt to open, service, or modify this device.
FEATURES
- IP67 Ingress Protection rating
- Supports TrueWireless™ Stereo Mode
- Includes DSP technology
- Includes USB charging port for charging other devices
- 5000mAh battery capacity
- Supports hands-free phone operation
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your
ordering, purchasing, and delivery experience is second to none. If you have
any problem with your order, please give us an opportunity to make it right.
You can contact a Monoprice Customer Service representative through the Live
Chat link on our websitewww.monoprice.com or via
email at support@monoprice.com. Check the
website for support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the
items listed below. If anything is missing or damaged, please contact
Monoprice Customer Service for a replacement.
- 1x Bluetooth® Speaker
- 1x Micro USB Charging Cable 1x 3.5mm Audio Cable
- 1x Strap
- 1x User’s Manual
PRODUCT OVERVIEW
- Bluetooth® Button
- TWS Button
- Power Button
- Volume- Button
- Volume+ Button
- Volume/Charging LEDs
- Bluetooth LED
- Micro USB Charging Port
- 3.5mm Audio Jack
- USB Power Port
CHARGING
Perform the following steps to charge the speaker.
- Plug one end of the included Micro USB Charging Cable into the USB Power Port on the speaker, then plug the other end into a USB power source, such as a computer, wall charger, or power bank (available separately). The Volume/Charging LEDs illuminate blue while charging is in progress.
- When all four Volume/Charging LEDs are fully illuminated, the battery is fully charge. Unplug the Micro USB Charging Cable from the USB power source, then unplug it from the speaker. Store the cable in a safe place for future use.
USING THE SPEAKER AS A POWER BANK
This speaker features a large capacity 5000mAh rechargeable battery and a USB
Type-A output port, allowing you to use the speaker as a power bank to charge
another device. To charge another device, plug one end of its charging cable
into the device, then plug the other end into the USB Power Port on the
speaker.
BLUETOOTH PAIRING
-
When the speaker is first powered on, it will attempt to reconnect to a previously paired device. If that device is powered off or out of range, the speaker will automatically enter Bluetooth® pairing mode. The Bluetooth LED will blink white, indicating that it is in Bluetooth pairing mode.
If the speaker is connected to a device and you want to connect a different device, press and hold the Bluetooth Button for 2 seconds to disconnect the first device and put the speaker in Bluetooth® pairing mode. The Bluetooth LED will blink white, indicating that it is in Bluetooth pairing mode. -
With the speaker in Bluetooth pairing mode, open the Bluetooth settings on your device and scan for nearby Bluetooth devices.
-
Locate and select the MP43248 entry. If prompted for a passcode, enter 0000 (four zeros). Once connected, the Bluetooth LED will illuminate solid white.
BASIC OPERATION
- With the speaker powered off, press and hold the Power Button for 2 seconds to turn the speaker on.
- With the speaker powered on, press and hold the Power Button for 2 seconds to turn the speaker off.
- With an active Bluetooth® connection, momentarily press the Power Button to pause or resume audio playback.
- Momentarily press the Volume- Button to decrease the volume level.
- Momentarily press the Volume+ Button to increase the volume level.
- With an active Bluetooth connection, press and hold the Volume- Button for 2 seconds to skip back to the previous track.
- With an active Bluetooth connection, press and hold the Volume+ Button for 2 seconds to skip forward to the next track.
- When using a physical audio connection through the 3.5mm Audio Jack, momentarily press the Power Button to toggle audio muting on or off.
- With an active Bluetooth connection, press and hold the Bluetooth Button for 2 seconds to disconnect your device. The speaker will then automatically reenter Bluetooth pairing mode.
- When an incoming call is received with an active Bluetooth connection, momentarily press the Bluetooth Button to answer the call.
- When an incoming call is received with an active Bluetooth connection, press and hold the Bluetooth Button to reject the call.
- With a call in progress, momentarily press the Bluetooth Button to hang up.
Note that when TrueWireless™ Stereo Mode is active, the phone controls are only active on the master (left) speaker. All other controls are active on both speakers and effect both speakers.
TRUEWIRELESS STEREO MODE
If you have two 43248 speakers, you can connect them together to form a stereo
pair for true stereo audio playback by performing the following steps.
- Ensure that neither speaker is connected to a Bluetooth® device and that both speakers are powered off.
- Power on both speakers, then momentarily press the Bluetooth Button to initiate TrueWireless™ Stereo Mode pairing. Once pairing is complete, an audible tone will be heard and the Bluetooth LED on the master (left) speaker will blink white, while the Bluetooth LED on the slave (right) speaker will illuminate solid blue.
- Open the Bluetooth settings on your mobile device and scan for nearby Bluetooth devices.
- Locate and select the MP43248 entry. If prompted for a passcode, enter 0000 (four zeros). Once your device is connected, the Bluetooth LED on the master (left) speaker changes to solid white and an audible tone can be heard.
- While TrueWireless Stereo Mode is active, restart both speakers to exit TrueWireless Stereo Mode.
Note that when in TrueWireless Stereo Mode, the 3.5mm Audio Jack on the slave (right) speaker is inactive. Use the jack on the master (left) speaker for a physical connection.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist
you with any questions you may have about installation, setup,
troubleshooting, or product recommendations. If you ever need assistance with
your new product, please come online to talk to one of our friendly and
knowledgeable Tech Support Associates. Technical support is available through
the online chat button on our website
www.monoprice.com or through email by sending a
message to tech@monoprice.com. Check the website
for support times and links.
To download the latest drivers, firmware, manuals, etc., go to
www.monoprice.com and type the P/N into the search
bar. If available, support files are linked at the bottom of the product page.
SPECIFICATIONS
| P/N | 43248 |
|---|---|
| Frequency Response | 80Hz ~ 20kHz |
| Signal-to-Noise Ratio | ≥ 75dB |
| Total Harmonic Distortion | ≤ 0.1% |
| Drivers | 2x 2.5″ |
| Nominal Impedance | 4Ω |
| Amplifier Output Power | 2x 15 watts |
| Bluetooth® Range | Up to 32 feet (10 meters) |
| Supported Bluetooth Profiles | AVRCP v1.6, A2DP v1.3, HFP v1.7, HSP v1.2 |
| Bluetooth Pairing Name | MP43248 |
| Ingress Protection Rating | IP67 |
| Input Power | 5 VDC, 2A (USB) |
| Output Power | 5 VDC, 1A (USB) |
| Battery Capacity | 5000mAh |
| Dimensions | 10.6″ x 4.3″ x 4.5″ (268 x 110 x 114 mm) |
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Modifying the equipment without Monoprice’s authorization may result in the
equipment no longer complying with FCC requirements for Class B digital
devices. In that event, your right to use the equipment may be limited by FCC
regulations, and you may be required to correct any interference to radio or
television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a non-interference basis with other
devices operating at this frequency. Any changes or modification to said
product not expressly approved by Monoprice, including the use of non-approved
antennas, could void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity with applicable directives
CE
This equipment complies with the essential requirements listed below:
- Radio Equipment Directive (RED) 2014/53/EU
- RoHS 2 Directive 2011/65/EU with Directive (EU) 2015/863
UK Conformity with the relevant Union harmonization legislation
UKCA
This equipment complies with the essential requirements listed below:
- Radio Equipment Regulations 2017
- Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG,
Inc.
Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. TrueWireless™ is a trademark of Qualcomm
Technologies International, Ltd. Qualcomm® TrueWireless™ is a product of
Qualcomm Technologies International, Ltd.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>