MiBOXER P120-24-A LED Special Adapter Series User Guide
- June 8, 2024
- MiBOXER
Table of Contents
MiBOXER P120-24-A LED Special Adapter Series
Description
P120-24-A is special power adapter which designed for MiBoxer LED strip light and controller. It has improved 2.4G RF control distance and dimming performance. The input voltage is universal global standard (100-240Vac 50/60Hz)
Features
- Universal AC input/Full range
- 3 pole AC inlet IEC320-C14, Class I power unit
- Built-in active PFC function
- No load power consumption <0.21W
- Energy efficiency Level VI
- Protections: Short circuit/Over Load/Over voltage
- Fully enclosed plastic case
- LED indicator for power on
- Meet environmental standard: Rohs
- Improved 2.4G RF control distance: >30m
- Low operating noise: ≤30dB
- Improved dimming performance
- Strip light not flash once it is over full loaded
- 5 years warranty
Applications
- Indoor office lighting
- Decoration lighting
- Smart home lighting
- Garden lighting
Item ID instruction
Specification
| Model No | P120-24-A |
|---|---|
| OUTPUP | DC Voltage |
| Rated Current | Min：4.8A |
| Current Range | 0-5A |
| Ripple And Noise | 200mVp-p Max At 115/230Vac input and output Min and Max. |
Load, the ripple and noise are as follows when measure with Max. Bandwidth of
20MHz and Parallel 47uF/0.1uF, crossed connected at testing
10% Load Efficiency| 78.00% Min At 115/230Vac input voltage,10% load
efficiency
Setup, Rise Time| <1 Second Max.at 115Vac-230Vac input and output Max.load
Hold up time| 20mS Max.at 115Vac input and output Max load
Over-shoot| 10% Max.When power supply at turn off/on
INPUT| Rated input voltage| 100-240Vac (Operating range：90-264Vac) (Voltage
Limit)
Rated input frequency| 47Hz-63Hz
Rated input current| 2.0 A Max
Power Factor| 0.9Min Vin=115/230Vac, Full load
Power consumption (no loading)| 0.21W Max. (Input voltage 115V and 230Vac)
Average Efficiency| 88.00% Min At 115/230Vac input voltage, 1/4, 1/2, 3/4 and
full load calculation average efficiency. Adaptor meet efficiency level VI
Inrush Current| ≤80A&350uS@230Vac（Max）
Lnrush Current| ≤0.7mA
PROTEC TION| Over Load| CC mode，(Recovers automatically after fault condition
is removed)
Over Voltage| Protection Type:Hiccup Mode,Recovers automatically after fault
condition is removed
Short Circuit| Hiccup mode(auto-recovery)
ENVIRO NMENT| Operating Temperature| -0℃ – +40℃
Operating Humidity| 20-90%RH (no condensation)
Storage Temperature/Humidity| -40℃ – 85℃; 10-90%RH (no condensation)
Atmispheric Pressure| 86-106KPa
SAFETY &EMC| Certifications| TUV-ENEC、CE、CB
Withstanding Voltage| I/P-O/P：3kV , I/P-FG：2kV, O/P-FG：0.5kV 5mA 60S
Insulation Resistance| I/P-O/P：>100MΩ@500VDC
Safety Standards| UL62368-1 IEC62368-1
GB4706.1, GB4343, GB17625 BS EN62368
BS EN55032/55035
EMI| CE-EMC/RCM:EN55032，EN55014 CCC:GB9254，GB17625.1
FCC：part 15B
EMS| CE-EMC/RCM:EN 61000-4-2,3,4,5
Others
| IP Rating| IP40
RoHS| RoHS 2.0 (EU) 2015/863
Warranty Condition| 5 yrs（Tc ≤ 80℃）
Remarks|
- We suggest user to install over or under loaded protective device in power supply circuit of led light and ensure safety using electricity
- Please turn off power and AC input once user install wiring
- The PC cover, shell accessories for power adapter installation inside of led light must be UL94-V0 anti-fire level
- Power adapter is important accessories for Led light, EMC function is easy to be affected by inside wiring connection of power adapter, the end manufacturer should pass new EMC testing for whole finished unit.
- Without any special notice, above testing figure is under testing condition ( temperature 25℃, humidity 50%, input 230Vac, 100% full loaded )
Characteristic Curve
- PF Curve
- Efficiency Curve (TBD)
Label 
Structure size (unit: mm) 
Output line DC connector (unit: mm)
NOTE:
- UL2464 18AWG Ø4.5 80 oC 300V VW-1 L=1200±50mm
- PLUG: 5.52.110mm, Straight plug fork with groove
- POLARITY: inside: “+”, outside: “-”
- Color: Black
- RoHS
Packaging Specification
| Model | P120-24-A |
|---|---|
| Packaging Box Size | 490×405×260mm(L×W×H) |
| Ouantities | 10PCS/layer; 2 layers/ctn; 20 PCS/ctn |
Transportation & Storage
Transportation
Suitable transportation means: vehicles, boats and aircraft. During transportation, there should be awnings for rain protection and sun protection. Civilized loading and unloading are required. There should be no severe vibration or impact Storage. Storage in accordance with the provisions of the Class I environment. For products which have been stored for more than six months, they mustn’t be used until they pass the re-inspection.
Attention
- Please use this product according to its specifications otherwise there may be malfunction.
- Use light fixtures that have not been certified or are not compatible with the LED drivers may cause fire or other hazards.
- Man-made damage, any use beyond the specification and non-original-factory modification are not covered by warranty.
Manufacturer: Futlight Optoelectronics Co., Ltd
Address: 2 Floor Building 4, Good Mind Industry, No.68 ChaoYang Road, YanLuo Street, Bao’an District, ShenZhen City, China
E-mail: miboxer-team@futlight.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>