Baby Trend AC01 Bounce N’ Play 3-in-1 Activity Center Instruction Manual

: June 8, 2024
: baby trend

Table of Contents

**** WARNING
- FALL HAZARD!
BABY TREND® CUSTOMER SERVICE
ASSEMBLY ASSEMBLY
TOY ATTACHMENT
MAINTENANCE
- FCC Statement
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Baby Trend AC01 Bounce N’ Play 3-in-1 Activity Center

Baby Trend AC01 Bounce N’ Play 3-in-1 Activity Center

**** WARNING

WARNING: Younger infants between 4 to 6 months are right at the critical age to be considered safe while playing in a seated styleactivity center. Your child MUST ALREADY be able to hold their head upright and steadily unassisted before being placed in the activity center. DO NOT use the activity center if they cannot.

STRANGULATION HAZARD Strings can cause STRANGULATION!

DO NOT place items with a string around child’s neck, such as hood strings or pacifier cords.
DO NOT suspend strings over product or attach strings to toys. The Stationary Activity Center is: Only for use by infants at least 4 months old and who can hold their head up unassisted.

FALL HAZARD!

Babies can FALL from unit resulting in head injuries.

Never leave child unattended. Always keep child in view while in product.
Never use near stairs, stoves or ovens, heaters, fireplaces, swimming pools, or other dangerous areas. To avoid tip over, place product on a flat, level surface.
NEVER lift this product with your child in it.
•
NEVER place product on counter tops, tables, or any other elevated surface.
Discontinue seated use mode if child can climb out or begins to walk, reaches 30 pounds in weight or 32 inches in height.
Do not use the stationary activity center if it is damaged or broken.
Discontinue use should any part become damaged. Please contact our customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.
Read all instructions before assembly and use of the stationary activity center.
Keep instructions for future use.

IMPORTANT! To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future

BABY TREND® CUSTOMER SERVICE

The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

Check that you have all the parts for this model before assembling the Activity Center

Seat and cover
Tabletop
3 Table Legs
Platform / Cover
Spinning Ball
Bendable Rattle
Toy Rings
Toy bar
Light and Sound Board

ASSEMBLY ASSEMBLY

SWIVEL SEAT MODE

**1**• Insert each leg into the underside of the tabletop (Fig. 1a).

NOTE: Ensure that the pin clicks into position.
Align the seat to the center opening and press it down firmly. The seat must completely click into to the tabletop (Fig. 1b).

NOTE: Rotate the seat to ensure the swivel function is active.
To attach and detach the seat cover, see step 7.

SEAT REMOVAL

**2** To remove the seat, use the edge of the seat to lift it off the tabletop ( Fig. 2).

ADJUSTABLE PLATFORM SET UP

**3** Underneath the tabletop pinch and pull out the 3 small straps (Fig. 3a).

Underneath the platform unhook the 3 adjustment plates, pinch and pull out the 3 large straps (Fig. 3b).
With the smooth side up, align the pointed side of the platform to the front of the tabletop. Hook the adjustment plate to small strap using the lowest hoop **(Fig. 3c).

** Repeat for the rear straps.

To adjust the height, unhook the adjustment plate and put it through the next division of the strap (Fig. 3d).
ATTENTION: Always secure the straps when the platform is not in use. Refer to step 4c and 4d.

NOTE: The Platform has 3 adjustable height levels. Always adjust all the straps to the same level (Fig. 3e)

ACTIVITY TABLE MODE

**4** If the platform is attached to the activity center, you must first reverse step 3.
NOTE: Always store away all straps for the tabletop mode as seen below.
Align the platform to the center opening, push the 2 tabs into the front first and press down firmly (Fig. 4a).
To remove the platform apply pressure from underneath at the pointed side of the platform while holding down the tabletop (Fig. 4b).

The platform should release easily

PLATFORM POSITIONS

Use level 1 to place the platform in the highest position, level 2 for middle position and level 3 for the lowest position (Fig. 3f).

NOTE: Always use the level that is most suitable for your child’s height.
To remove the platform: unhook the adjustment plate from the small strap **(Fig. 3g).

NOTE:** See strap storing in step 4.

STRAP STORAGE

Tabletop Straps: Underneath the tabletop, put the strap into the storage slot. Pinch the strap and put the second hoop into the tabs. Repeat for the other 2 straps (Fig. 4c).
Platform Straps: Always secure the straps when the platform is not in use. Be sure to lay each strap back over itself and clip each adjustment plate to the strap. Store the strap by pinching it into the small tabs (Fig. 4d). DO NOT USE product with any loose and unsecured straps. Always check product before each use

BATTERY INSTRUCTION

**5**Reference the diagram below. The light and sound board requires 3 AAA batteries. Reference (Fig. 5) for battery installation. Unscrew the battery door and pull outward. Install batteries as shown. Re-install battery door and push until it clicks into place.

WARNING

Requires three AAA (LR03) batteries (not included) for toy operation.
Non-rechargeable batteries are not to be recharged.
Different types of batteries or new and used batteries are not to be mixed. Batteries need to be inserted with the correct polarity.
Exhausted batteries are to be removed from the toy.
The supply terminals are not be short-circuited.
Rechargeable batteries are to be removed from the toy before being charged
Rechargeable batteries are only to be charged under adult supervision.

TOY ATTACHMENTS

**6** Place toys in this order as shown. Toys must be properly attached before use (Fig. 6a).

NOTE : ONLY the spinning ball, bendable rattle, and toy rings are interchangeable.
All toys must be aligned with their single or double tab housings on the activity center tray (Fig. 6b).

Set the toy base in alignment with the tabletop fitting. From underneath the tabletop push the lock up and turn it left to lock.

BATTERY DOOR

Light and Sound Board Diagram

NOTE: To activate the light and sound board, use the ON / OFF Switch.

TOY ATTACHMENT

Use the diagram below to lock the toys onto the tabletop. (1) Push the tab up and rotate it left to lock. (2) Rotate the tab right to release the toy. (3) Always put the small tab lock back into the tabletop when not in use.

MAINTENANCE

DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap

SEAT FABRIC

**7** To remove the seat fabric for maintenance, pull out all the plates from the tab on the seat base (Fig. 7a).
• To reattach the fabric, insert the warning label side towards the backrest of the seat base. Fold the fabric over and insert the rear center plate into the tab. Continue to connect all plates around the seat base tabs. All plates and tabs must be secured before use (Fig. 7b)

TABLE LEGS

**8** • To remove the legs from the tabletop, press in the pin and pull the leg out. Repeat for the other 2 legs.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

**** WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE
AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has hadits serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.