HOME ACCENTS Holiday TY-200SM-W 200L Cool White Faceted M5 LED Lights User Manual
- October 28, 2023
- HOME ACCENTS Holiday
Table of Contents
HOME ACCENTS Holiday TY-200SM-W 200L Cool White Faceted M5 LED Lights
IMPORTANT INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following!
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use, When products are used in outdoor applications, connect the product to a
- Ground Fault Circuit Interrupting (GFC) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use, the product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplace, candles, or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place it on sharp hoOKS or nails.
- Do not let lamps rest on the supply cord or on any Wire
- Unplug the product when leaving ihe house, when retiring for the night, or if left unattended.
- This is an electic produci-not a tõy! To avoid the risk of fire, būrns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from the cord, wire, or light string.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Do not cover the product with cloth, paper or any material not part of the product when in use
- This product is equipped with push-in type LED lamps.
- Do not twist the lampś.
- This product employs overload protection (fuse). A blown fuse indicates an overload or șhort-cirçuit situation
- lf the fuse blows, unplug the product from the outlet.
- Also, unplug any additional strings or products that may be attached to the product.
- Replaçe the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.
- If the replacement fuse plows, a snort circuit may be present and the product should be discarded.
- Read and follow all instructions that are on the product or provided with the product.
USE AND CARE INSTRUCTIONS
- When the product is placed on a live tree, the tree should be well-maintained and fresh.
- Do not place on live trees in which the needles are brown or break off easily.
- Keep the tree holder filled with water.
- if the product is placed on a tree, the tree should be well-secured and stable
- Before using or reusing, inspect the product carefully.
- Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, low connections, or exposed copper wire.
- When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires
- When not in use, store neatly in a cool, dry location protected from sunlight.
- The LED lamp has polarity. Do not deliberately change the direction of the LED lamp in the lamp holder.
USER SERVICING INSTRUCTIONS
To replace the fuse
- Grasp the plug and remove it from the receptacle or other outlet device.
- Do not unplug by, pulling on the cord.
- Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
- Remove Tuse carefully. Turn the plug over to remove Tuse.
- Risk of fire. Replace fuse only with 3 Amp, 125Volt fuse(provided with the product.)
- Close fuse coVer. Slide closed the fuse access cOver on top of the attachment plug,
To replace a lamp
- Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by, pulling on the cord.
- Unlock the burnęd LED lamp by liting the hook and pulling the lamp and plastiç base straight out of the lampholder as shown in Fig1.
- Insert the spare LED lamp into the lampholder in the correct direction and lock the hook of the lamp base by pushing the lock down into the tab as shown in Fig.2.
- Replace lamps with only 3.4 volts, 0.068 watts LED type lamps provided with this product.
CAUTION
-
Do not exchange the lamp base on the new lamp with the old one or the LED wires may break.
-
Pull lamp and plastic base straight out of lamp holder.
-
Do not deliberately change the direction of the LED lamp in the lampholder (always match the hook to the tab
-
This String is rated 7.2 watts (0.06Amps), do not overload. Connect other Lighting Strings or decorative outfits end-to-end up to a maximum of 216 watts (1.8amps) total
-
if connecting to a light string that does not have a wattage (W rating (found on the taq within 6 inches of the plug)
Calculate The wattage (W) as follows: Multply thế current (A) which is on the flag type label located Within 6 inches of the plug, by 120 -
For example, the string is rated 120V, 60Hz, 0.06AmpS 0.06x 120=7.2 Wats.
-
The total amount of wattage that can be connected is 216W-7.2W=208.AW
-
Risk of fire. This product does not contain lamp shunts, which allow the product to operate if one lamp burns out.
-
Do not replace lamps with other than lamps provided with this product.
-
Replace lamps only With 3.4 volt, 0.068 watt spare