GE Holiday 90876 StayBright LED Net Style Lights Instructions
- June 8, 2024
- GE Holiday
Table of Contents
Model No. 3-100/3F/B-065
When using electric products, basic precautions should always be followed including the following:
a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS
b) Donotuse seasonal products outdoors unless marked suitable for indoor
and outdoor use.
When products are used in outdoor applications, connect the product to. a
Ground Fault Circuit Interrupting (GFC!) outlet.
lf one is not provided, contact a qualified electrician for proper
installation.
¢) This seasonal use product is not intended for permanent installation or
use.
d) Donotmount or place near gas or electric heaters, fireplaces, candles or
other similar sources of heat.
e) Donot secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f) Donotlet lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or
if left unattended.
h) This is an electric product-not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or placed
where small children can reach it.
i) Donotuse this product for other than its intended use.
j ) Donothang ornaments or other objects from cord, wire, or light string.
k) Donotplace lighting string on carpeting, drapes, furniture, or allow it to
contact vinyl siding while the power is on.
|) Donot perform any maintenance or troubleshoot for bad or broken lamps while
the power is on.
m) Donotclose doors or windows on the product or extension cords as this may
damage the wire insulation.
N) Donotcover the product with cloth, paper or any material not part of the
product when in use,
0) This productis equipped with push-in type lamps. Do not twist lamps.
p) This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the product
from the outlet. Also unplug any additional strings or products that may be
attached to the product. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check the
product. If the replacement fuse blows, a short-circuit may be present and the
product should be discarded.
q) Read and follow all instructions that are on the product or provided with
the product.
r) SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
a) When the productis placed on alive tree, the tree should be well maintained
and fresh. Do not place on live trees in which the needles are brown or break
off easily. Keep the tree holder filled with water.
b) Ifthe product is placed on a tree, the tree should be well secured and
stable.
¢) Before using or reusing, inspect product carefully. Discard any products
that have cut, damaged, or frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is
placed, including trees, branches, or bushes, to avoid any undue strain or
stress on the product conductors, connections, and wires.
e) When notin use, store neatly in a cool, dry location protected from
sunlight.
USER SERVICING INSTRUCTIONS
Fuse replacement: Most often, fuses blow because too many sets have been
strung end-to-end.
a) Before changing fuses, make sure the set is unplugged.
b) Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
¢) Usinga flathead screwdriver, open fuse cover. Slide open the
fuse access cover on top of attachment plug towards blades.
d) Remove fuses carefully.
e) Risk offire, Replace fuse only with 3 Amp, 125 Volt fuse (provided with
product).
f) Close fuse cover. Slide closed the fuse access cover on top of attachment
plug. Make sure door is fully closed and fuses are completely covered.
q) Risk of fire. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard productif the attachment plug is
damaged. Bulb replacement: Before changing bulbs, make sure set is unplugged.
Step 1: Grasp plug and remove from the receptacle or other outlet device. Do
not unplug by pulling cord.
Step 2: Hold bulb by the plastic base and Step 3: Replace lamp with only 3.8 volt, 0.068 watt pull bulb/base straight out of socket. LED type lamp (provided with product).
Ifthe spare bulbs provided with the product have no plastic base or the
plastic base does not fit, first follow steps1-2above, Then
a) Remove the old bulb by straightening the bulb wires and pulling bulb
straight from the base.
b) Replace the new bulb by straightening the bulb leads and aiming each wire
into a separate hole in the plastic base.
¢) Make sure each bulb lead comes out an exit opening at the bottom of the
plastic base. Now bend each lead up such that each bulb lead fits closely
against the narrow side of the plastic base.
CAUTION:
-
This lighting string is rated 6.48 Watts (0.054 Amps), do not overload. Connect other lighting 1 Strings or decorative outfits end-to-end up toa maximum of 216 Watts (1.8Amps) total.
lf connecting to a lighting string that does not have a Wattage (W) rating { found on the tag within 6 inches of the plug} calculate the wattage as follows: Multiply the current (__A) which is on the flag – type tag by 120. For Example: Lighting string is rated 120 V, 60 Hz, 0.054 Amps. 0.054 X 120 = 6.48 Watts.
Add the wattage of each light string together for a total of 216 Watts or less. (Do not exceed 216 Watts.) -
Toreduce the risk of overheating, replace burned-out bulbs promptly. Use 3.8 volt, 0.068 watt LED type lamp only.
-
Toreduce the risk of fire and electric shock: a) Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal, and b) Do not mount or support strings in a manner that can cut or damage wire insulation.
For questions and/or assistance, call customer service at
1-877-398-7337
or visit us on the web at
www.geholidaylighting.com.
©2022 Nicolas Holiday Limited., 9F., No.37, Guangfu N Rd., Taipei, Taiwan
10560 All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>