PHILIPS KT Series MyCreation Tailored Lighting Instruction Manual
- October 30, 2023
- Philips
Table of Contents
PHILIPS KT Series MyCreation Tailored Lighting
Product Information
- Product Name: Pendant trackmounted (PT)
- Alternate Version: Pendant surfacemounted (PS)
- Model: T10
- Type: Trackmounted (T)
- Design: Drum (KT series)
- Code: GA 69CT
- Usage: Indoor
- Lifetime: LIFE L80B50
- Voltage: 220V
- Frequency: 50Hz
- Lifespan: 50 khrs at 240V 60Hz
- Coating Material: GLOMWax
- Maximum LEDs: Max. LEDs
- Protection Rating: IP20
- Impact Resistance: IK02
- Mounting Type: Surface or Track-mounted
- Power: Wiring through driver
- Luminosity: Lumen (lm)
- Color Temperature: CCT (K)
- Power Consumption: (W)
- UGR Standard: Standard UGR
- Weight: kg
- Driver: Driver Model
Product Usage Instructions
The product can be used for indoor purposes only. It can be mounted on a surface or on a track using the appropriate mountingtype. The wiring should be done through the driver provided with the product. The power consumption of the product is (W) and the voltage required is 220V with a frequency of 50Hz. The product has a lifespan of 50 khrs at 240V 60Hz and has a protection rating of IP20 and an impact resistance of IK02. The product has a luminosity of Lumen (lm) and a color temperature of CCT (K). The UGR standard is Standard UGR. The weight of the product is kg.
To use the product, follow the below instructions:
- Choose the appropriate mounting type, either surface-mounted (PS) or track-mounted (PT) for your requirement.
- If you have chosen track-mounted (T), select the TC KT X 11S/XXX, TC KT X 20S/XXX, or TC KT X 27S/XXX model depending on your requirement.
- If you have chosen surface-mounted (PS), select the PSE/DIA/WIA or PSU/DIA/WIA model depending on your requirement.
- Ensure that the voltage and frequency requirements are met.
- Mount the product using the appropriate mounting type and wiring through the driver provided with the product.
- Switch on the power supply to use the product.
WHAT’S IN THE BOX
INSTRUCTION
- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- This luminaire is not suitable for use as emergency lighting.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Clean with dry cloth.
Inrush current
Track-mounted (T)
Pendant track-mounted (PT)
Pendant Surface-mounted (PS)
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors.
The control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. The light source contained in this luminaire is not replaceable, in case of damage replace the luminaire.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label.
Disposal of the product.
This product is made of high quality materials and components that can be
recycled and reused. If a product is marked with the crossed-out circular
garbage can symbol shown here, it means that it is subject to the European
Directive 2012/19/EU. You should check the information about local facilities
collecting used electrical and electronic products and their packaging on your
own. Local regulations prohibiting the discarding of equipment and packaging
together with municipal waste must be strictly observed. Proper disposal of
used packaging and product will help to avoid potential harmful eff ects on
the environment and human health.
2023-05-16
4422 944 10229
© 2023 Signify Holding. All rights reserved
Data subject to change without notice
Keep for future reference: https://pro.mycreation.lighting.philips.com/