pTron Zenbuds 1 ANC Earbuds User Guide

: August 27, 2024
: pTron

Table of Contents

pron Zenbuds 1 ANC Earbuds
TO CHARGE THE CHARGING CASE
CHARGING THE EARBUDS
SMART PAIRING AND BLUETOOTH CONNECTIVITY
CONTROL FUNCTIONS
Troubleshooting
Safety Precautions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

pron Zenbuds 1 ANC Earbuds

Important: pTron ‘Zenbuds 1’ is set at 50% default volume. You can increase the volume through the Earbuds or the connected device.

TO CHARGE THE CHARGING CASE

Connect the C-type USB cable to the charging case and the USB end to a 5V power source.
Plug the USB connector of the cable into a USB 5V/1A power source.
The indicator light will blink orange while the charging case is getting charged. Depending on the power delivered to the charging case, the charging case will take approximately 1 to 1.5 hours to completely charge.
The charging case’s orange indicator light will get steady when the case is fully charged.

CHARGING THE EARBUDS

Place both the earbuds into the charging case properly and close the charging case cap/lid. Earbuds will start charging automatically.
The charging case indicator light will blink orange while the earbuds are getting charged.
The charging case indicator light will turn off when the earbuds are fully charged.

POWER ON/OFF

POWER ON : Simply open the charging case cap and take out the earbuds from the charging case. The earbuds will automatically turn on.
OR
Press and hold the Touch Sensitive Area (TSA) on both L and R earbuds for 3 seconds simultaneously, then release when you hear the voice prompts, “POWER ON”.
POWER OFF : Keep both earbuds in the charging case and close the charging case cap properly.

SMART PAIRING AND BLUETOOTH CONNECTIVITY

Open the charging case cap.The earbuds will automatically turn on.Take out the earbuds from the charging case.
Wait for 2-3 seconds until the left and right earbuds pair with each other.
Turn on the Bluetooth on your phone, and tap “pTron TWS” to connect. Both earbuds will respond with a voice prompt: “Connected”.
When the Bluetooth signal is lost, the earbuds will respond with a voice prompt “DISCONNECTED” and will shut down automatically after 5 minutes.
When the earbuds power on, the earbuds will connect to the last paired device automatically. If not, please repeat the above steps.

CONTROL FUNCTIONS

Mode Change:-

ANC, Transparency, Normal Mode: Long-touch TSA on either earbud. Both earbuds will respond with a voice prompt.

Game Mode : Three time-touch on either earbud TSA. Both earbuds will respond with a voice prompt, “Game Mode”.
Music Mode : Three time-touch on on either earbud TSA. Both earbuds will respond with a voice prompt, “Music Mode”.
Important: Whenever you switch on the earbuds, earbud mode will be in Music mode; you need to change the mode as per your preference, ENC (environmental noise cancellation) mode is by default activated all the time.

Call:-

To Answer A Call : Tap on the TSA of either earbud once.
To End A Call : Double tap on the TSA of either earbud. Both earbuds will respond with a voice prompt.
To Reject A Call : Double tap on the TSA of either earbud. Both earbuds will respond with a voice prompt.

Music:-

To Play and Pause Music : Touch TSA on either earbud once.
To Play the next song : Touch TSA on the right earbud twice.
To Play the Previous Song : Touch TSA on the Left earbud twice.
Voice Assistant : Four time-touch on either earbud TSA to activate the default smart voice assistant. The respective voice assistant screen pops up on the connected device and you may place your command.

Important: If Voice Assistance does not activate, the functionality must first be enabled through your media device settings.

Mono (Single) Earbud Usage

Please note that any earbuds can be used in mono mode. Take out any one earbud from the charging case and close the charging case cap.
The selected earbud automatically enters pairing (connecting) mode.
Turn on Bluetooth on your media device and search for “person TWS” to connect.

Important:

To switch to Stereo Mode (both earbuds), simply take out the other earbuds from the case. It will automatically power on and pair with the previously selected earbud, hence enabling stereo usage.
You cannot use the below functions in mono (single earbud) mode:-
- Next song or previous song function.

Troubleshooting

Scenario 1: One Earbud is Not Working

Place both the earbuds in the charging case and close the charging case cap.
Take out both the earbuds together from the charging case.
Wait until L & R earbuds pair with each other.
Turn ON the Bluetooth on your phone, search for “person TWS” & connect.

Scenario 2: Earbuds Not Connecting/Scanning

Place both the earbuds in the charging case and close the charging case cap.
Take out both the earbuds together from the charging case.
Restart your Bluetooth device or phone.
Now, search for ” pTron TWS” on your Bluetooth device & connect.

Scenario 3: Earbuds Disconnecting During a Phone Call

Charge earbuds 100% before use.
Restart the earbuds and reconnect with your device.

Important: Please use this TWS within a 10-meter wireless range from the connected device.

Safety Precautions

Keep the device out of extreme heat and humidity.
Play time may vary depending on personal habits,
Using incompatible USB cables or high-voltage chargers can damage the product & void the product
warranty. We strongly recommend using good quality DC5V-1A chargers & the USB cable included in the package.
Please don’t over-charge the product as it will decrease the service life of the battery.
Read all warnings on the product and in the operating instructions.
It is recommended to utilize the product below the maximum volume to protect hearing and extend the earbuds’ service life.
Please don’t open/temper the product or the product’s battery.
Please keep the product out of children’s reach.
Stop using this product immediately if it causes discomfort or pain.
Dispose of the product responsibly and adhere to your local authority guidelines.

Packing Box Content
1 pair of earbuds, 1 Charging Case, 1 USB Type-C charging cable, 1 User Manual/Warranty QR Card & 2 pairs of silicone ear tips

What is Covered in Warranty?

Manufacturing defects in materials and workmanship of the product ONLY. This warranty applies when the product is used under normal conditions and for the purpose for which the product was designed.
No warranty on product accessories such as silicone ear tips, ear hooks, and small charging USB cables.
To avail warranty, Product Registration is Mandatory at https://ptron.in/apps/product-registration
Please read through the complete warranty details at https://ptron.in/pages/repair-service-warranty

Customer Care Details

Mail: support@ptron.in
Tel: 040 – 67138888
Service Centers List: https://ptron.in/pages/ptron-service-centers

Disclaimer: The color and specifications shown in or mentioned in the user manual may differ from the actual product. Images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.