GE Holiday 22005 Pre-Lit Christmas Trees Instruction Manual
- October 30, 2023
- GE Holiday
Table of Contents
22005 Pre-Lit Christmas Trees
Product Information
The pre-lit Christmas tree by Nicolas Holiday Ltd. eliminates cord connections and comes with a remote control that offers multiple lighting options. The tree has a height of 7.5 feet and includes three sections labeled A, B, and Top, a metal tree stand, and an ON/OFF foot pedal. The tree is designed for indoor use only and operates on 120V power supply.
Product Usage Instructions
- Remove the tree from the carton and inspect the sections labeled A, B, and Top, along with the metal tree stand.
- Insert section A into the tree stand and tighten the thumbscrew. Then, plug the tree into an electrical wall outlet.
- Properly align and insert section B into the top of section A. Adjust branch tips for a fuller look. Repeat this step for shaping.
- Properly align and insert the Top section into the top of section B. Adjust branch tips for a fuller look.
- Gently press on the foot pedal to turn on/off lights. The remote control offers multiple lighting options.
- If the tree does not illuminate, try stepping on the ON/OFF foot pedal and make certain the wall switch is turned on. If one section of your tree does not illuminate, check that section for cut or damage wires or that all electrical connections on tree are made.
- To store the tree, disconnect the main extension cord plug from the wall outlet. Starting at the top, disconnect the Top from section B and then disconnect section B from section A. Gently fold
the tips in branches and fold the branches up toward the center. Remove section A from the tree stand and close the tree stand to place it into the carton. Refer to the drawing on how to repack the tree. Store the carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.
Please note that using or installing any additional Christmas lighting or ornamentation that is powered by a light bulb socket may result in damage to your Christmas tree or cause personal injury. Such usage will also void the limited warranty of this product. Disconnect the decorative item from the power source before performing any maintenance or cleaning.
Pre-Lit Christmas Trees with Easy Light Technology®
eliminates cord connections
Color Choice® LED Technology
Assembly Instructions
Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree.
Should you have any problems with your tree, visit us at
www.geholidaylighting.com for more
information. You can call our toll free number at 1-877-398-7337.
Check our website for latest service hours and assembly instruction videos.
TREE ASSEMBLY DIAGRAM
SCHEMATIC DIAGRAM
NOTE: No tools required
**Tree Sections Tree Stand Approx. Asm Time***
7.5 ft tree 3 Metal 5 – 10 minutes
-
Carefully unpack the carton. Remove bubble wrap and inspect the sections of your tree.
The carton should include sections labeled “A”, “B” and “Top”, as well as a Tree Stand.
-
The tree stand should be open and set at 90° angle.
-
Insert Section labeled A into tree stand, tighten the thumbscrew. Then insert the plug into an electrical wall outlet.
-
Untie RED twist-tie to release branch panels. All branches should fall into place with a gentle pull on the outer layer of branches.
Fig. A. Start at the inner and stagger the tips. Move each tip up to 40°.
Fig. B. Make tips 2 & 3 to horizontal, tip 4 to vertical and tips 5 and 6 up to 45°.
-
To assemble the section labeled “B”, properly align and insert section “B” into the top of section “A”. (See Fig. C) Adjust branch tips, as needed, for a fuller look.
-
Repeat “Step 4” for shaping.
-
To assemble the tree top, properly align and insert the “TOP” section into the top of section “B”. (See Fig. D) Adjust branch tips, as needed, for a fuller look.
-
Gently press on foot pedal to turn on/off lights.
Tree Storage
- Remove the tree’s main extension cord plug from the wall outlet.
- Starting at the top, disconnect the “TOP” from section “B” and then disconnect section “B” from section “A”. {Fig. 1} Note: Gently fold the tips in branches and fold the branches up toward the center. {Fig. 2} Care should be taken to avoid damage to the lights. 3. Remove section “A” from the tree stand and close tree stand to place into the carton.
- Refer to the drawing on how to repack your tree. {Fig. 3}
IMPORTANT: Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.
Troubleshooting Tips
If the tree does not illuminate, try stepping on the ON/OFF foot pedal and make certain the wall switch is turned on. If one section of your tree does not illuminate, check that section for cut or damage wires or that all electrical connections on tree are made. Due to unique construction of the light sets, the individual LEDs are not replaceable. The light sets are designed for continued operation even if an individual LED fails to light.
DISCLAIMER : DO NOT USE OR INSTALL ANY ADDITIONAL CHRISTMAS LIGHTING OR
ORNAMENTATION THAT IS POWERED BY A LIGHT BULB SOCKET. DOING THIS MAY RESULT IN
DAMAGE TO YOUR CHRISTMAS TREE OR CAUSE PERSONAL INJURY. DOING THIS, WILL
RESULT IN A VOID OF THE LIMITED WARRANTY OF THIS PRODUCT.
Disconnect the decorative item from the power source before performing any
maintenance or cleaning.
For indoor use only 120V
THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.
GE is a trademark of General Electric Company and is under license by Nicolas
Holiday Ltd.
©2022 Nicolas Holiday Ltd.
9 F., No. 37, Guangfu North Rd., Taipei, Taiwan 10560 All rights reserved.
Printed in China 22005LO