GE Holiday 21151 Winterberry White Branch Tree Instruction Manual
- October 30, 2023
- GE Holiday
Table of Contents
Winterberry® Branch Tree
Color Choice® LED Technology
Assembly Instructions
21151 Winterberry White Branch Tree
CAUTION: EXERCISE CARE WHEN UNPACKING AND ASSEMBLING
Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree.
Should you have any problems with your tree, visit us at
www.geholidaylighting.com for more
information.
You can call our toll free number at 1-877-398-7337.
Check our website for latest service hours and assembly instruction videos.
WARNING:
Risk of fire and electric shock. Disconnect light set from power before
starting.
-
Keep wires clear of being pinched or cut during assembly or installation.
-
Do not press or grasp bulbs during assembly or installation.
-
Before starting make sure stakes are clear of underground: sprinkler, telephone and power lines.
-
Please read all instructions and warnings included with this product before using.
-
Carefully unpack, removing any bubble wrap and inspect the contents of your tree. {Fig. A}
The tree stand should be open and set at 90 angle. Remember to tighten the thumbscrew after connecting bottom section and tree stand. See {Fig. B}
Untie red twist-tie to release branch panels.
Gently position any branches that do not fall into place.
Your assembled tree may be heavy and difficult to move when done, so place the stand in desired location before assembling.
Secure in place using the (4) metal stakes. -
When you connect two tree sections, it is important that you align the mark on the tree poles. See {Fig. C}
-
To electrically connect the lighted sections:
First, locate the 2 white connector cord tags between each section.
Then fully insert the 2-pin polarized male and female connectors.
Fully screw on the cap to secure connection. -
To illuminate, find and unhank the long lead wire from the bottom section.
Fully insert the direct plug-in adapter into a working GFCI outlet or an outdoor rated extension cord.
TREE ASSEMBLY DIAGRAM
Assemble section by section.
Disconnect the decorative item from the power source before performing any
maintenance or cleaning.
Indoor/ Outdoor 120V
THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.
GE is a trademark of General Electric Company and is under license by Nicolas
Holiday Ltd.
NOTE: Hammer/Mallet may be required for stakes
| Tree Sections| Tree Stand| Approx. Asm Time
---|---|---|---
7 ft tree| 3| Metal| 5 – 10 minutes
Troubleshooting Tips
If one section of your tree does not illuminate, check that section for cut or
damage wires or that all electrical connections on tree are made.
Due to unique construction of the light sets, the individual LEDs are not
replaceable. The light sets are designed for continued operation even if an
individual LED fails to light.
IMPORTANT: Store your carton neatly in a cool, dry location protected
from sunlight to prolong the tree life and to better keep the light sets in
working order. Do not place a heavy load on the carton to avoid damage to or
crushing the carton and tree inside.
NO Spare Bulbs
Nicolas Holiday Ltd.
©2022 Nicolas Holiday Ltd.
9 F., No. 37, Guangfu North Rd.,
Taipei, Taiwan 10560 All rights reserved.
Printed in China
21151LO
Documents / Resources
| GE
Holiday 21151 Winterberry White Branch
Tree
[pdf] Instruction Manual
21151 Winterberry White Branch Tree, 21151, Winterberry White Branch Tree,
White Branch Tree, Branch Tree, Tree
---|---