GE Holiday 00179 Random Sparkle LED 20pc Twinkling Ice Crystal Icicle Set User Guide

June 9, 2024
GE Holiday

GE-Holiday-LOGO

GE Holiday 00179 Random Sparkle LED 20pc Twinkling Ice Crystal Icicle Set

GE-Holiday-00179-Random-Sparkle-LED-20pc-Twinkling-Ice-Crystal-Icicle-Set-
PRODUCT-IMAGE

ITM./ART.1419025

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

20 count / 100 LED Twinkling Ice Crystal Icicle Set Model: 00179 When using electrical products, basic precautions should always :b e followed including the following.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS CAUTION:

  • To reduce the risk of fire and electric shock:

    • Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal, and
    • Do not mount or support strings in a manner that can cut or damage wire insulation.
  • To reduce the risk of overheating, replace burned out lamps promptly. Use 2.5 Volt , 0.5 Watt lamps only.

  • This is an electrical product – not a toy! To avoid the risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.

  • This product is equipped with push-in type lamps. Do not twist lamps.

  • Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided contact a qualified electrician for proper installation.

  • This seasonal use product is not intended for permanent installation or use.

  • Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

  • D o not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

  • Do not let lamps rest on the supply cord or on any wire.

  • Unplug the product when leaving the house, when retiring for the n ight, or if left unattended.

  • Do not use this product for other than its intended use.

  • Do not hang ornaments or other objects from cord, wire, or light string.

  • Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the power is on.

  • Do not perform any maintenance or troubleshoot for bad or broken lamps while the power is on.

  • Do not close doors or windows on the product or extension cord as this may damage the wire insulation.

  • Do not cover the product with cloth, paper or any material not part of the product when in use.

  • This product employs overload protection (fuse).
    A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded.

  • Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS

USE AND CARE INSTRUCTIONS

  • When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.

  • If the product is placed on a tree, the tree should be well secured and stable.
    Before using, or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
    When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.

  • When not in use, store neatly in a cool, dry location protected from sunlight.

USER SERVICING INSTRUCTIONS

To replace lamp:
Bulb locking feature keeps bulbs securely in place, to replace bulb, you have to remove the lock from the slot .After replacing the LED, put the lock back into the slot to ensure a secure fit.

  • Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
  • Pull lamp and plastic base straight out of lamp holder.
  • To reduce the risk of overheating,
    • replace burned out lamps promptly. Use 3.3 Volt, 20 mA LED lamps provided with this product.
    • Risk of fire. This product does not contain lamp shunts in order to allow the product to operate if one lamp burns out. Do not replace lamps with other than the spare lamps provided with this product. GE Holida- 00179 Random Sparkle LED 20pc-Twinkling Ice Crystal-Icicle-Set-User-Guide-01

Connecting Sets End to End

  •  This lighting string is rated 14.4 Watts (0.12 Amps), do not overload. GE light set come pre-attached to a plug. For end-to-end connections up to two (2) sets, you will need only one (1) plug. To begin, choose one (1) set as your master set. This set would be the only set connected to a plug. Next, unscrew the coaxial connector between the light set on all of the sets you would connect to your master set. Lastly, connect each set of lights end-to-end using the coaxial connections, screwing each connection cap tightly.
    Note: you may only add one (1) additional sets to your master set for a total of two (2) connected sets.

CAUTION: To reduce the risk of overheating,

  • replace burned out lamps promptly. Use 3.3 V, 20 mA LED lamps provided with this product .
  • Risk of fire.

This product does not contain lamp shunts in order to allow the product to operate if one lamp burns out. Do not replace lamps with other than the spare lamps provided with this product.

Warning:

  1. Do not use where only part of the power unit is protected from rain or water (outlet boxes where there is only a partial cover shall not be used for outdoor installations).
  2. This power unit is intended to be correctly oriented in a vertical or floor mount position.
  3. If the connector of this lighting string does not properly fit into the connector of the driver, do not modify the product and discard product if the connector is damaged.

NOTE: Use only this GE branded, Class 2 Power Supply, Model TS-5W29V, manufactured by Guang Zhou Ting Shen Electric Co Ltd. that was provided with this product. DO NOT use this adapter with any other product CAN ICES-005(B)/NMB-005(B)

For Indoor and Outdoor Use 120V 60 Hz

Costco Wholesale Canada Ltd.* 415 W. Hunt Club Road Ottawa, Ontario
K2E 1C5, Canada
1-800-463-3783
www.costco.ca
Made in China
For customer service call: 1-866-489-0019

OPERATING HOURS:

  • January 3 – November 11:
    Monday to Friday, 10AM-7PM EST,

  • November 12 – December 23:
    Monday to Friday, 8AM-8PM EST, Saturday &
    Sunday,10AM-7PM EST

  • December 26 – 29: 10AM-7PM EST See complete schedule at www.geholidaylighting.com

©2022 Nicolas Holiday Limited, 9F., No. 37, Guangfu N. Rd Taipei, Taiwan 10560.

All rights reserved.
This is not a toy. For decorative use only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

GE Holiday User Manuals

Related Manuals