Signature Hardware 434139 Kingston Manor Outdoor Wall Sconce Light Instruction Manual
- June 8, 2024
- Signature Hardware
Table of Contents
434139 Kingston Manor Outdoor Wall Sconce
Light
Instruction Manual
434139 Kingston Manor Outdoor Wall Sconce Light
KINGSTON MANOR
OUTDOOR WALL SCONCE
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing
electric fixtures. Signature Hardware accepts no liability for any damage to
the faucet, plumbing, sink, counter top, or for personal injury during
installation.
Observe all local plumbing and building codes. Unpack and inspect the product
for shipping damage. If any damage is found, contact our Customer Relations
team via live chat at
www.signaturehardware.com or by emailing
support@siganturehardware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.
ADDITIONAL QUESTIONS?
Still need help? Check out our Help Center at www.signaturehardware.com for product and warranty information, or contact us through live chat or by emailing support@signaturehardware.com.
KINGSTON MANOR
OUTDOOR WALL SCONCE
CARE AND MAINTENANCE:
To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that
contain alcohol.
CAUTION:
Shut off main power supply before cleaning product or changing light
bulbs.All glass is fragile. Use care when handling glass shades and bulbs.
RECOMMENDED TOOLS AND ACCESSORIES
SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE. READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THE PRODUCT: FOR PRODUCT OR INSTALLATIO QUESTIONS PLEASE CALL CUSTOMER. SERVICE AT 1-800-221-3379.
INSTALLATION (FIG 1)
-
Shut off the power at the circuit breaker and remove old fixture,
-
Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
-
Assemble the Top Cover (A) to the Cage (F) with screws (B).
-
CONNECTING THE WIRES Connect the black wire from the fixture to the supplied wire. Connect the white wire from the fixture to the white (neutral) house wire.
Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Tuck the wire connections neatly into the junction box. -
Attach the Cage (F) to the Tube (E), and secure with Screws (D).
signaturehardware.com
1.855.715.1800
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>