Signature Hardware 941443 Black Woodberry Single Light 17 Inch Tall Instruction Manual

June 8, 2024
Signature Hardware

Signature Hardware - logo 941443 Black Woodberry Single Light 17 Inch Tall
Instruction Manual

BEFORE YOU BEGIN

We recommend consulting a professional if you are unfamiliar with installing electric fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing,  sink, counter top, or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage.
If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing support@siganturehardware.com.

GETTING STARTED

Ensure that you have gathered all the required materials that are needed for the installation.

OUTDOOR WALL SCONCE

Signature Hardware 941443 Black Woodberry Single Light 17 Inch Tall - Figure
1

CARE AND MAINTENANCE:

To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.

CAUTION:
Shut off main power supply before cleaning product or changing light bulbs. All glass is fragile. Use care when handling glass shades and bulbs.

RECOMMENDED TOOLS AND ACCESSORIES

| Wire Connectors (3pcs)
---|---
| Pre-assembled (3pcs)
| Spare mounting screw (1pc)

SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE.
READ THESE INSTRUCTIONS COMPLETELY BEFORE

INSTALLATION (FIG 1)

Signature Hardware 941443 Black Woodberry Single Light 17 Inch Tall - Figure
2

  1. Shut off the power at the circuit breaker and remove old fixture,

  2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.

  3. Assemble the Top Cover (A) to the Cage (F) with screws (B).

  4. CONNECTING THE WIRES
    Connect the black wire from the fixture to the supplied w ire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Tuck the wire  connections neatly into the junction box.

  5. Attach the Cage(F) to the Tube (E) , and secure with Screws (D).

Signature Hardware - logo1.855.715.1800
signaturehardware.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Signature Hardware User Manuals

Related Manuals