KODAK INFINIO F882 Outdoor Security Cameras User Guide

KODAK INFINIO F882
OUTDOOR SECURITY CAMERAS
Quick Start Guide

Packing List

Product Overview

1. Lens
2. Microphone
3. Indicator Light
4. PIR
5. Light sensor
6. Reset Button
7. On/off button
8. Sync Button
9. USB Charging Port
10. Universal screw mount

Indicator Light Illustration

Base Station

Indicator Light 1| Solid Red: Activating
Quick Flashing Red:Waiting for Internet Pairing Quick Flashing Green:Connecting to Server Solid Green:Connected to Server Successfully Slow Flashing Red: Device Fault
Slow Flashing Green: Device Upgrading
Indicator Light 2| Flashing Green: Adding camera; The indicator light will turn off after completion
SYNC Key| SYNC:Press the SYNC key, the Base Station will enter Adding camera status
Siren Off:When Siren on, press the SYNC key to turn it off
Power Port| Power Supply Port
SD Card Slot| For local Storage(SD Card Max Capacity:128GB)
USB Slot| Connect USB storage device for local storage, up to 2TB
WAN Port| Port to connect Router’s LAN port
Reset Button| Press and hold for 3s, the base station will be reset.
Camera
Indicator Light| Red LED blinks quickly: Standby for configuration. Green LED blinks quickly: Network pairing.
Green LED on : Camera online.
Yellow LED blinks slowly : Firmware upgrade. Red LED blinks slowly : Device fault.
On/off Button| SYNC: Press the button, then the device will enter Waiting for Pairing status.
Power Button: Press the button to wake up it when the camera is in deep sleep mode; Press and hold the button for 3s, the camera will enter deep sleep mode.
USB Charging Port| Charging port
Reset Button| Press and hold for 3s,the device will power off and reboot after reset setting, but the camera will not be unbound.

User tips

For longer battery lifetime, you are recommended:

1. Adjust the motion detection sensitivity from high to low according to actual distance desired to detect.
2. Place and adjust the camera location to point to areas that have adequate illumination to avoid the camera from always entering night vision.
3. Ensure no small obstacles and random moving objects, for example tree branches and leaves, are placed in front of the outdoor camera to avoid the camera to be mis-triggered.

For always have video playbacks in APP:

1. Remember to place the SD card inside the card slot in the Base Station.

Getting Start

1. Use the Ethernet cable to connect the Base Station to Router’s LAN port
2. Insert the micro SD card to the Base station
3. Plug the adapter to the power outlet to power on the base station.

The Indicator light 1 will change from solid red to blink red when the base station is ready for paring.

1. Need one router connecting to internet
2. Need at uplink network with at least 2MB speed

Pairing in KODAK SMART HOME APP

1. Add Base Station
   1. Please connect your mobile to your router through WiFi (must 2.4GHz band WiFi)
   2. Open and follow the instructions to add the base station.

2. Add Camera
   1. Please press the On/off button of all cameras one by one, then the cameras will beep, and the indicator light of the camera starts to filash red; If the indicator light does not filash red, please press and hold the reset button for 5s to reset the camera.
   2. Follow the instructions to add the base station.
   or press the pairing button on top of the base station to enter pairing status, the Indicator light 2 will filash green.
   3. When the camera successfully pairs to base station, a voice prompt will be heard from camera and camera’s indicator light will turn green, while Indicator light 2 of base station will turn off and base station exit the pairing status. Then the added cameras will be displayed on the app.
   4. If there is any camera could not pair to the base station, please add the camera again following the above ① ② ③ steps.

Charging Camera

1. The camera is with built-in rechargeable battery
2. When charging, please use the camera USB cable to connect camera and camera adaptor, then plug the adptor into power outlet(100v-240v) for charging. The indicator light on camera will turns solid white indicating that the device is in charging(if the indicator light filashes when charging,please contact customer service)
3. It requires 4hrs for full charging. Once full charging, the white indicator will turns off.

Installing Camera

1. Drill or drive the mounting screws into the wall. If it’s stone wall, then requires screw anchor.
2. Mount the mounting base on the screws.
3. Install the camera on the mounting base and adjust the camera angle.

Recommended mounting height:2-3meter

KODAK Smart Home Apphttps://www.kodaksmarthome.com/app

The Kodak trademark, logo and trade dress are used under license from Kodak.
Distributed and sold by © eBuyNow eCommerce Ltd. All other trademarks are the property of their respective owners.© 2021 eBuyNow eCommerce Ltd. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>