LUXON A19E26 Series Radar Motion Sensor Light Bulb Instructions
- June 15, 2024
- LUXON
Table of Contents
A19E26
Series Radar Motion Sensor Light
Bulb Instructions
A19E26 Series Radar Motion Sensor Light Bulb
Radar Motion Sensor LED Bulb Series
IMPORTANT SAFTGUARDS
WARNING – Risk of fire or electric shock. Disconnect power at fuse or circuit breaker before installing or servicing.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
- WARING – Risk of fire or electric shock. LED bulb installation requires knowledge of electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- WARING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Each light bulb should be installed in a matching lamp base.
- To prevent electrical shock, make sure the power is off before installing.
- Try to avoid touching the surface of the led bulb with your hands after lighting the bulb.
- Suitable for indoor locations only.
- Please don’t squeeze the bulb when installing to prevent damaging the bulb or injuring your finger.
- The product should not be installed in places where high temperature or corrosive present.
- Every time re-install, the sensor bulb will keep lighting up for 40-60s.
- Make sure the installation distance between the 2 bulbs is more than 25ft.
- It will not work when covered with a glass or closed fixture, make sure bulb top is completely exposed
- We do not advise installing the bulb into an enclosed fixture or clear glass cover due to it will reduce motion detection radius, If you have to do this to avoid getting wet, leave the motion sensor exposed so it can detect motion well.
TO INSTALL:
Step1:
Make sure the power is off before installing to avoid electrical shock and
burn out the light fixture. Should be installed downward and the best height
is 10 feet
Step2:
Please check the specification and your fixture to make sure it is compatible.
Step3:
Installing the led bulb into the socket by moving clockwise follow example
pictures.
Step4:
Every time re-install, the sensor bulb will keep lighting up for 40-60s.
Step5:
After installed, The bulb will keep lighting for 40-60s, PER FIRST INSTALLED
WITHOUT detecting any motion in sensor area (If there is any object moving,
The bulb will always keep lighting until without any detecting motion–only for
first installation ), and then turns off automatically, it only turns on in
the dark and dusk when detecting motion.
The bulb automatically turns on when it detecting any object moving in the
dark and turns off 30 seconds after you leave the area
ELECTRICAL RATINGS
Model| Input volts| Sensing Angle| Install Height|
Sensing Distance| 2 bulbs spacing| Automatic on/off within less than
5-10Lux light intensity
Radar Motion sensor bulb| 85-260V/AC| 180°| 10 FT| 13-26 FT| More than 25 FT
Specification:
Product size: 60*110mm
Power: 5W
Voltage: 85-265V AC
Power Supply: IC Constant Current Power Supply
Light source: LED chip
Luminous flux: 450lm
Color temperature: 2700K
CRI:≥80
Dimmable : No
Lamp socket: E26
Light emitting angle: 180°
Sensitivity image:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>