Apple MC30 MagSafe Charger User Guide
- June 16, 2024
- Apple
Table of Contents
Apple MC30 MagSafe Charger
Safety Information
- charging pad
- Indicator light
- USB-C port
- Mounting clamp
- Dashboard Mount+Sticky Dashboard Pad
Indicator Light Guide
| Charger Status | Plugged In | Standby | Charging/ Fully Charged | Error Detected |
|---|---|---|---|---|
| Indicator Light | Red & Blue Flash | Red | Blue | Flashing |
If an error is detected:
- Check that your phone supports wireless charging and does not have any credit cards, stands, or other metal attachments on the back(other than the magnetic ring)
- After checking the above,unplug and plug in the charging cable again to resume normal charging.
Important Reminders
-
Compatible with Magsafe-enabled iPhones and cases
-
The maximum output of this charger is 15W,Its maximum output for iPhone is 7.5W. 3. Only use the cable provide with charger.
An Apple cable or other third-party cable may interfere with charging -
This charger requires a charging adapter that supports QC or PD fast charging and an output
of at least 18W. 5. This charger will only attach to a caseless iPhone 13/12 series phone, official Mag Safe cases.
Safety Warnings
-
Do not place the device in temperatures below 0℃ or above 60℃.
-
Do not attempt to disassemble the device, expose it to an open flame,or submerge it in water
to avoid damaging the device. -
Always check for damage to the device, cables, or other accessories before using the device. If
damaged, do not use the device. -
Do no attempt to disassemble or modify the device in any way, as it may cause serious damage and void the warranty.
-
Do not expose the device to extremely hot, humid, or corrosive environments to avoid damaging the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>