TCL 5K UN Mechanical Window Air Conditioner User Guide
- June 8, 2024
- TCL
Table of Contents
TCL 5K UN Mechanical Window Air Conditioner
Register and protect your purchase
Register easily with your smartphone Scan or text a photo of the camera icon
to 71403
Or register online at register.tcl.com
Need help? Visit photoregister.com/help
or text HELP to 71403
Add a TCL Protection Plan when you register your product and be covered
from life’s mishaps
Thank you for choosing TCL. We want your ownership experience to bring you as
much joy as the product you purchased does, so we’re offering you a special
price on TCL Protection Plans when you purchase during registration. Add a TCL
Protection Plan within your first 30 days of ownership to receive the best
value and we’ll make sure nothing gets in the way of you enjoying your new
product.
IMPORTANT SAFETY INSTRUCTIONS
Before installing and using your air conditioner, please read this owner’s
manual carefully. Store this manual in a safe place for future reference. Your
safety and the safety of others is very important to us. Please pay attention
to all safety messages outlined in this owner’s manual.
WARNING: To reduce the risk of fire, electrical shock or injury when
using your air conditioner, follow the following basic precautions: ELECTRICAL
REQUIREMENTS
The electrical ratings for your air conditioner are listed on the model and
serial number label located on the front left side of the unit (when facing
the front).
REGISTER YOUR APPLIANCE
You can register your appliance online by going to
register.tcl.com Be sure to retain your original
sales receipt. A valid proof of purchase is required for all warranty claims.
BATTERY WARNING STATEMENT
Do not mix old and new batteries and do not mix alkaline, standard (carbon-
zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries
RECOMMENDED GROUND METHOD
For your personal safety, this air conditioner must be grounded. This air
conditioner is equipped with a 3 prong power supply cord with a grounded plug.
To minimize the possibility of electrical shock, the cord must be plugged into
a 3 prong outlet and grounded in accordance with all local codes and
ordinances. If a 3 prong outlet is not available, it is the customer’s
responsibility to have a properly grounded 3 prong outlet installed by a
qualified electrician.
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The distance between user and device should be no less than 20cm.
INSTALLATION MANUAL—Important considerations
When compared with other refrigerants, R32 is more environmentally friendly.
Please use this product as instructed. This refrigerant is flammable and may
combust under certain conditions, however when this product is used as
directed these risks are significantly reduced. Always consult with a trained
professional when maintaining or repairing an air conditioner.
Warning
- Please read the manual before installing, using, or conducting maintenance.
- Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
- Be aware that refrigerants may not contain an odor.
- Do not pierce or burn the appliance.
- The appliance shall be stored in a room without continuously operating sources (for example: open flames, an operating ignition gas appliance or an operating electric heater).
- Please contact the nearest after-sale service center when maintenance is necessary. At the time of maintenance, the maintenance personnel must strictly comply with the Operation
- Manual provided by the corresponding manufacturer and any non-professional is prohibited to maintain the air conditioner.
- It is necessary to comply with the provisions of gas-related federal, state, and local laws and regulations.
- It is necessary to clear away the refrigerant in the system when maintaining or recycling an air conditioner by a trained professional.
Important Considerations
- The air conditioner you buy must be installed by professional personnel and the “Installation manual” is used only for the professional installation personnel!
- The installation specifications should be subject to our after-sale service regulations.
- When filling the flammable refrigerant, please use caution to avoid serious injury.
- A leak test must be done after the installation is completed.
- It is a must to perform the safety inspection before maintaining or repairing an air conditioner using flammable refrigerant in order to ensure that the fire risk is reduced to a minimum.
- Requirements for the total weight of filled refrigerant and the area of a room to be equipped with an air conditioner (are shown as in the following Tables GG.1 and GG.2)
The maximum charge and the required minimum floor area
m1 = (4 m3) x LFL , m2 = (26 m3)) x LFL, m3 = (130 m3 )x LFL
Where LFL is the lower flammable limit in kg/ m3,R290 LFL is 0.038 kg/ m3,R32
LFL is 0.038 kg/ m3.
For the appliances with a charge amount m1 < M = m2:
The maximum charge in a room shall be in accordance with the following:mmax=
2.5 x (LFL)(5/4) x h0 x (A)1/2
The required minimum floor area Amin to install an appliance with refrigerant
charge M (kg) shall be in accordance with following: Amin = (M/ (2.5 x
(LFL)(5/4) x h0)) 2
Where:
mmax is the allowable maximum charge in a room, in kg;
M is the refrigerant charge amount in appliance, in kg;
Amin is the required minimum room area, in m2;
A is the room area, in m2;
LFL is the lower flammable limit, in kg/m3;
h0 is the installation height of the appliance,in meters for calculating mmax
or Amin, 1.8 m for wall mounted;
Table GG.1 – Maximum charge (kg)
Table GG.2 – Minimum room area (m2)
Installation Safety Principles
- Site Safety
- Operation Safety
Please note that:
- The installation site should be in a well-ventilated area.
- The sites for installing and maintaining an air conditioner using Refrigerant R32 should be free from open fire or welding, smoking, drying oven or any other heat source higher than 548°C which easily produces open fire.
- When installing an air conditioner, it is necessary to take appropriate anti-static measures such as wear anti-static clothing and/or gloves.
- Installation or maintenance location should not be surrounded by obstacles or close to any heat source, flammable, and/or explosive areas or objects.
- If the product suers refrigerant leak during the installation, all personnel should go out till the refrigerant leaks completely for 15 minutes. If the product is damaged, a professional must carry such damages product back to the maintenance station. It is prohibited to weld the refrigerant pipe or conduct other operations on the contaminated site.
- The air conditioner unit needs to sit on a flat even surface.
- It is necessary to avoid the places where there are other electrical products, power switch plugs and sockets, kitchen cabinet, bed, sofa and other valuables directly under the lines on two sides of the indoor unit.
- Any ventilation openings of unit should be free from obstructions.
What’s in the Box
Tip! Before unboxing, cut the tape along the top of the box to loosen contents inside. Once you lift and remove the box, check the inside of the box as some parts may be stuck at the top. You can find the screws and other parts located in the tray beneath the AC unit.
Let’s Get Started
Step 1: Testing
Before installing your AC, let’s test it to make sure it works properly and
your outlet has the proper power level. First, place it on a flat surface,
plug it directly into a wall outlet (never use a power strip or other device),
and turn it on. Next, put the mode to High Cool ****and set the temperature to
Max Cool 7. After 3 minutes, the AC should be blowing cool air. If so, please
continue on to the next step. If not, please go to the Troubleshooting tips at
the back of this guide or visit support.tcl. com/us for additional help.
Step 2: Installation
A few quick notes before installing:
- This unit is made to fit inside a standard double-hung window between the sizes of 23” and 36”.
- Check the size of your window before installing. The air conditioner can be installed without the accordion panels to fit in a narrower window opening.
- The Lower Sash (the lower part of the window that moves up and down) must allow for 14.5” of vertical clearance when open.
- The electrical outlet must be within reach of the power cord.
-
Use the included (4) 3/8” screws to fasten the top mounting rail to the unit.
-
Fasten the accordion style window panel expander pieces to the unit. They are marked “Right” and “Left”. Pull the leading edge of them to its maximum width (Fig 2a). Then slide the panel expanders into the grooved notches (slide downward) on the sides of the unit (Fig 2b), and make sure they are inserted into the metal rails tightly (Fig 2c).
-
Carefully place the window air conditioner into the window where it is to be installed (2 people are recommended for this step). Close the window securely. The AC unit should be slightly tilted to the outside area to allow water to drain out from the unit.
-
a. Fasten the air conditioner to the window frame, using the included ½” screws. Fasten each of the panel extenders (Left and Right). You may have to drill a pilot hole in the window frame to fasten these screws to the window sash.
b. Attach the lock frame between the panel extender and the window sill and fasten them together with the included ¾” locking screw. Repeat for each side.
c. Attach the sash lock between the top of the sliding window and window frame, using 1 of the included ¾” screw to secure the window closed.
d. To prevent outside air from entering the room, insert the foam top window gasket, cut to the width of the window. -
Plug the unit into the electrical outlet as specified above in the electrical requirements. Move the control to the COOL mode.
How to Control Your AC
All the basics you need to know to stay cool!
- Power – Turn on the unit by rotating the MODE dial to the desired setting.
- Cooling Mode – For maximum cooling, set the MODE dial to . In HIGH COOL mode, the fan will automatically go to high. This will circulate the air throughout the room.
- Fan Mode – For fan only modes choose either , or . The air conditioner will not cool the room in fan mode.
- Thermostat – Turn the TEMP dial to set the desired room temperature. For maximum cooling, turn the TEMP dial to “7” (Max Cool).
- Directional Vents – To direct the air flow, use the horizontal lever to control the horizontal (sideways) motion, and move the air deflector to control the vertical (up/down) direction.
- Minimize Wear and Tear – To minimize wear and tear, wait at least 3 minutes before changing MODES. This will prevent the compressor from overheating and the circuit breaker from tripping.
- Filter – It is recommended you clean your filter monthly. Remove the filter by sliding it out of the front right side of the air conditioner. Gently wash it with a mild dish washing detergent and let dry completely before reinstalling it into the AC.
Normal Operating Sounds
You may hear a pinging noise, caused by the water hitting the condenser on
rainy days, or when the humidity is high. This design feature helps remove
moisture and increase efficiency. You may hear the thermostat click when the
compressor cycles on and off. Water will collect in the base pan on rainy
days, or high humidity days. The water may overflow and drip from the unit on
the outside. The fan may run, even when the compressor is not on.
Troubleshooting
Having trouble completing installation? Don’t worry, it’s usually an easy fix.
LIMITED PRODUCT WARRANTY
What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased as new from an Authorized Dealer of TCL brand products and packaged with this warranty statement.
WARRANTY PERIOD (NON-COMMERCIAL USE):
- Labor: Twelve (12) Months from the original date of purchase.
- Parts: Twelve (12) Months from the original date of purchase.
WARRANTY PERIOD (COMMERCIAL USE):
- Labor: Six (6) Months from the original date of purchase.
- Parts: Six (6) Months from the original date of purchase.
Commercial Use includes, but is not limited to, the use of this product in a commercial or business environment, the use of this product in an institution or for institutional purposes, or for other commercial purposes including rental purposes. Should your TCL device prove to be defective in material or workmanship under normal use during the warranty period listed above, effective from the date of original consumer purchase of the product, TCL North America at its sole discretion will, (1) pay an Authorized TCL Service Center for both labor charges and parts to repair your device, or (2) replace your device with a new or refurbished/recertified equivalent product. If repaired at an Authorized TCL Service Center, TCL is not responsible for the transportation costs to the Authorized TCL Service Center. However, TCL will pay for the return shipping. TCL will provide instructions for the packaging and shipping of the unit. Units that are improperly packed and damaged during shipping are not covered under this limited product warranty. This limited product warranty is good only to the original purchaser of the product and effective only when used in North America. You must have your original purchase receipt or proof of purchase (bill of sale or receipted invoice) which states the condition of the unit (new, used), the unit’s date of purchase, place of purchase, and model/serial number.
HOW SERVICE IS HANDLED: Call
1-800-825-6747 and choose the
appropriate prompt. Please have product type, model number, serial number, and
ZIP code ready.
Troubleshooting and prior approval from a TCL representative MUST occur before
sending in your product for repair.
Product Registration Information
You can find the model number and serial number on a label on the back or side
of the product. Register your product online at
register.tcl.com.
NO OTHER WARRANTY IS APPLICABLE TO THIS PRODUCT. THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. SOME STATES AND/OR TERRITORIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON THE LENGTH OF TIME AN IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU, THE ORIGINAL PURCHASER, SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR TERRITORY TO TERRITORY. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT WWW.TCL.COM/US TO VIEW THE MOST CURRENT VERSION.
THIS LIMITED PRODUCT WARRANTY DOES NOT APPLY TO:
- Service calls to your home for delivery or pick-up, installation, instruction, replacement of house fuses, connection of house wiring or plumbing, or to correct unauthorized repairs.
- Failure of the product to perform due to wireless signal reception problems not caused by your unit, or due to power failures or interruptions or inadequate electrical service.
- Damage caused by transportation or handling, including damage during shipment from a Retailer (please contact your Retailer for assistance).
- Damage caused to the product by accident, vermin, lightning, wind(s), fire, flood(s), or act(s) of God.
- Damage caused by operating the product in a corrosive or wet atmosphere.
- Repairs when your TCL product is used in other-than-normal, single-family household use, or contrary to the instructions described in the product User’s Guide.
- Damage resulting from accident, alteration, misuse, abuse, neglect, insects, normal wear-and-tear, cosmetic damage, mishandling, power line surges, improper or faulty installation, or improper repair or maintenance. Improper repair includes the use of parts not approved or specified by TCL.
- Markings or images on the product’s display panel.
- Normal maintenance as described in the User’s Guide (including but not limited to cleaning or replacing filters, cleaning coils, or other normal maintenance).
- Use of accessories or components that are not compatible with this product.
- Products with altered, missing, defaced, unreadable, or removed serial numbers.
- Changes in the appearance of the product that do not affect product performance.
- Increases in utility costs and/or additional utility expenses.
- Products purchased from non-authorized TCL resellers.
- Products sold in any condition other than new from the original manufacturer or sold outside of North America.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
CONTACT INFORMATION:
TCL North America
1860 Compton Ave
Corona, California 92881
1-800-825-6747
www.tcl.com/us
Need more help?
support.tcl.com
1-800-825-6747
TCL SUPPORT:
www.tclusa.com/support
1-800-825-6747
References
- Photoregister | Help
- TCL Support
- TCL Support
- TCL Electronics - Shop Home Appliances & Entertainment - TCL UK
- TCL USA | TVs, Sound Bars, Phones, Appliances
- TCL Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>