FEELWORLD FW568S 6 Inch Full HD Field Monitor User Manual

: June 8, 2024
: FEELWORLD

Table of Contents

FW568S 6 Inch Full HD Field Monitor
Key Features
Product Description
Menu Operation Instruction
Menu Interface Instruction
Menu Function Instruction
Technical Parameters
Trouble Shooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

6″ Full HD Field Monitor
F970 Install and Power Kit
User Manual

FW568S 6 Inch Full HD Field Monitor

Foreword
Thank you for purchasing our 6-inch Full HD monitor. Please read this manual carefully before using the unit. Have a great experience!
CAUTION

Please avoid the heavy impact and drop onto the ground when move the product.
Please do not cover the vents and holes on the enclosure and do not place the machine on a bed, sofa, and rug to ensure good ventilation. Otherwise it will lead to overheating and reduce the service life.
The screen of this product is made of glass. Please do not drop the screen towards the ground. Keep away from injury if the screen is broken.
Keep the product away from the heat source, such as the radiator, the water heater, the stoves and the other heating products.
Avoid the prolonged exposures to the sun as the LCD screen will be damaged.
To avoid damaging the product, please do not take apart or repair the unit by yourself without the adjustable components in the unit.
To maintain the LCD screen better, please notice the ways as below to avoid the scratch, the discoloration and the other damages.
1. Please refrain from using the hard objects to hit the screen.
2. Please do not force to wipe the screen.
3. Please do not use the chemical solutions to clean the screen.
4. Please do not spray any detergent on the screen.
5. Please do not write on the screen directly.
6. Please do not stick on the screen.
7. Please simply wipe with a clean soft cloth and make sure no water on the screen.
● To protect the plastic cover better, please follow these ways as below to avoid the damages;
1. Please do not use the chemical solutions to clean the cover.
2. Please keep away from the volatile things.
3. Please do not clean the case hard.
4. Please simply wipe with a clean soft cloth and make sure no water on the cover.

Key Features

6-inch 1920x1080full HD IPS screen
New UI interface, easier to setup
Scroll Wheel button operation, a button can complete all the operations
Supports 3D LUT Log to REC.709 and user 3D LUT upload (up to 32)
With Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome etc. functions, help you accurately exposure and focus every shot.
Multiple power supply modes: DC IN 12V, Type-C 5V and NP-F battery slot, meet the different selection.
Stereo Earphone output
DC 8V power out to power your DSLR camera or mirrorless camera

Product Description

Front Panel
Back Panel

1.1 Button Instruction

Button| Function when OSD is not displayed| Function when OSD is displayed
---|---|---
** MODE| Long press turn ON/OFF power Short press signal mode switching| Long press turn off power
F1| Custom button F1| /
F2/EXIT| Custom button F1| Return to previous OSD menu Exit the menu
MENU**| Short Press to bring up main menu; Volume/Backlight adjustment| Scroll to select next menu item or function/parameters value adjustment;
Short press to confirm the selected menu item or function; Long press return to previous OSD menu or exit the menu

1.2 Port Instruction (bottom)

Type-C: Type-C power input. It is recommended to be used for local power supply only. It is not recommended to connect other devices to provide loop- out power. It also use to firmware update and LUT files import.
: 3.5mm Earphone port output
DC OUT 8V : DC power output interface, polarity as the output power Barrel output for powering your camera with a separately available DC coupler via
adaptor (like NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic).
DC IN 12V: DC power input interface, polarity as the input power
1.3 Port Instruction (left)

HDMI IN: V1.4, HDMI signal input, up to 4K@30Hz.
HDMI OUT: V1.4, HDMI signal output, up to 4K@30Hz.
SDI OUT: SDI signal output
SDI IN: SDI signal input
1.4 Power Supply Way

The rear cover of the monitor is equipped with a F970 battery plate, which is applicable to F970 series of batteries.
● Sony F970 battery plate for battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 series. It is recommended to use standard original F970 battery. When using battery power supply: two power output interfaces (DC OUT 8V interface and external install and power kit) can be connected to other device. When powering other device, it is recommended to choose a battery with a larger capacity, so the longer the use time.
Remark: Please take off the battery from the monitor if you don’t use the monitor in a long time.
The left side of the monitor has a DC 12V input power port (5.5mm outer, 2.1mm inner) and supports 7 ~ 24V wide voltage. The DC power adapter needs to be purchased separately. When using external adapter input: two power output interfaces (DC OUT 8V interface and external install and power kit) can be connected to other devices. When powering other equipment, it is recommended to equip at least 3A power adapter.
The bottom of the monitor has a Type-C 5V input power port. This port can be connected to the power bank for power supply and is not used for data transmission; it is recommended to be used only for local power supply, and it is not recommended to connect other devices to provide loop-out power.

1.5 Sony F970 Install and Power Kit

A Sony F970 external install and power kit design is added to the back of the monitor. The external kit can be used to install and install the external equipment, like wireless transmitter, LED light, video converter and others which can be powered by Sony F970 battery.
The kit has two cross grooves, you can adjust the position of the external device by loosening 2 screws up and down / left or right, or install the kit upside down. When you don’t need the kit, you can loosen the screws and remove the kit.
Note: Before disassembling the kit, make sure that the monitor is turned off, and then remove the battery or power adapter.

Just move the kit: Loosen 2 screws, and then adjust up / down / left / right.
Steps to remove the kit:
Loosen the 2 screws.
Use both hands to move the kit left.
Move the round holes to the corresponding 2 screws.
(You can also install the kit upside down.)
Then gently lift the kit upwards and carefully disassemble the 2P power cord.
Then remove the 2 screws.
Install back to the kit: first screw the 2 screws back to the screw hole used to install the kit on the back of the monitor, install the 2P power cable to the cutout, then
align the round hole of the kit with the screw, and then push the kit to the screw at the center of the kit cross, then tighten the screws.

1.6 Mount Points

¼-20 Thread Points
There are (3) ¼-20 thread points (top, bottom, right side) can be easily connected to the hot shoe mount, tripod fixed installation.
Tilt Arm Mounting
The monitor secures to your camera using the included Tilt Arm via shoe mount or 1/4″-20 thread. The Tilt Arm enables 180° of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment (like a microphone, LED light, or wireless receiver) that would otherwise be displaced from the
camera’s accessory shoe.

1.7 Sunshade

Attach the Velcro (hook side) ① to the outside of the sunshade frame of the monitor, open the sunshade ③, and align the Velcro (loop side) on the inside of the sunshade with the Velcro (hook side) ② on the monitor sunshade frame, and then complete the sunshade installation ④.

After correctly connect to the power supply, the indicator will turn (Red),
press ****to turn on monitor power, the indicator will be Yellow, and then input signals, the indicator will turn Green from Yellow.
2.1 When the menu is not displayed, scroll the wheel to adjust the volume or backlight. You can select “Left and Right Key Set” in the menu “User Options” to set volume or backlight.
2.2 Press “MENU” scroll wheel button to enter OSD main menu, and scroll the wheel to go through the secondary menu function.
2.3 Press the “MENU” wheel key to enter the secondary menu, scroll the wheel to select the function and then press “MENU” to confirm.
2.4 Scroll the wheel to adjust the parameters value.
2.5 Long press MENU wheel button or press F1/EXIT to exit the menu.

Assist

All Waves| On, Off
After turning on, waveform, vector, histogram and embedded audio will be shown.
---|---

** Waveform**

| On, Off
Mode：RGB、YUV、Y
This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The waveform feature also checks the evenness of the lighting when lighting a chromakey or background.
Waves Trans.：Off, 25%, 50%, 75%
---|---

**Vector**

| On, Off
shows how saturated the image is and where the pixels in the image land on the color spectrum.

**Histogram**

| On, Off
Mode ： RGB1 、 RGB2 、 Y

**Focus Assist**

| On, Off
Color： （Red, Green, Blue）
Peaking Level：you can adjust the peaking level after turning on（1～10）

**Embedded Audio**

| On, Off
The Audio Level Meters provide numerical indicators and headroom levels. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.

**Over Exposure**

| On, Off
Exposure Level：you can adjust the exposure level after turning on （10~100）

**Check Field**

| On, Off Mode：Red, Green, Blue, Mono

False Colors

| On, Off

Marker

**Nine Grid**

| **On, Off
Color: Red, Green, Blue, Black, White, Gray**
---|---

**Safe Frames**

| On, Off
Mode: 80%, 85%, 90%, 93%, 96%, 2.35:1
Color: Red, Green, Blue, Black, White, Gray

**Center Marker**

| **On, Off
Color： Red, Green, Blue, Black, White, Gray**

**Ratio Marker**

| On, Off
Mode: 4:3 、 13:9 、 14:9 、 15:9 、 16:9 、 1.85:1 、 2.35:1
Color: Red, Green, Blue, Black, White, Gray
Modified Mark：0~5

Image

** Scan Mode**

| **Under Scan, Over Scan**
---|---

**Aspect Ratio**

| **Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen
Anamorphic| On, Off
Mode：1.33X,** 1.6X, 2.0X, 2.0X MAG, User
Under the User, can be customized（1.20X～2.00X）

**Image Flip**

| **On, Off
Mode: H Flip, V Flip, H_V Flip**
---|---

**Zoom Mode**

| On, Off
Mode ： 2X 、 4X 、 9X 、 16X 、 User
Under the User , can be customized（100%~200%）

**Image Freeze**

| **On, Off**

**P2P**

| **On, Off**

User Option

LUT| On, Off
After the LUT Switch is turned on, you can use the Lut (SLOG2, SLOG3, LOGC, VLOG).
Lut Import： Confirm
After copying the 3D LUT file to the USB flash drive and inserting it into the TYPE-C to USB Connector,
press “MENU” wheel button Confirm to import the 3D LUT file.
Lut Table
Show the 4 built-in Lut and the custom load Lut (up to 32）
---|---

**Display Adjustment**

| Backlight ： 0~100 Brightness ： 0~100 Contrast ： 0~100 Saturation ： 0~100 Tint ： 0~100
---|---

**Color Adjustment**

| Color Temp. ： 5600K, 6500K, 9300K, User
Under the User , the red, green and blue of the image can be adjusted (0~255)

Shortcut Key

| All Waves, Waveform, Vector, Histogram, Embedded Audio, Center Marker, Safe Frames, Nine Grid, Focus Assist, False Colors, Over Exposure, Anamorphic, Image Freeze, Check Field, Zoom, Image Flip, Aspect Ratio To set the 2 shortcut custom button F1, F2 on the panel e.g.: Using“MENU” scroll wheel keyto setting. Press it enter menu , then scroll to select User Option and press it to confirm. Then scroll to select Shortcut Key and press it to confirm, select F1 and confirm to pop-up function items，then scroll to select one of them and press to confirm, the cursor will be changed to gray color after confirmed.Same setting for F2

**Left Right Key Set**

| **Volume, Backlight**

System

Language

| English
---|---

**OSD Option**

| OSD Time：Off, 15Sec, 30Sec, 45Sec OSD Trans: Off, 25%, 50%, 75%
No Signal: Red, Green, Blue, Black, White, Gray

**Volume**

| On, Off
0~100

**Reset**

| Scroll the wheel to select Reset and press Confirm , the system back to original setting.

** Firmware Update**

| After copying the 3D LUT file to the USB flash drive and inserting it into the TYPE-C to USB Connector, press “MENU” wheel button Confirm to update. After the upgrade, monitor will automatically restart.

Technical Parameters

Panel Size	6″ IPS
Resolution	1920×1080 pixels
Dot Pitch	0.069 (H) × 0.069 (V) mm
Aspect Ratio	16:9
Brightness	450cd/m2
Contrast	1000:1
Viewing	80°/80°(L/R) 80°/80°(U/D)
Backlight	LED
Input	SDI, HDMI, DC IN 5V (Type-C)

Note: please use 5V/2A or more than 2A Type-C power
**Output| SDI, HDMI, DC OUT 8V, Barrel (5.5mm outer, 2.1mm inner)
---|---
Audio| 3.5mm Stereo Headphone
****HDMI Support Format| 480i /480p /576i /576p 720p(60/59.94/50/30/29/25/24/23.98） 1080i(60/59.94/50）1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) 4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz) DCI 4K 4096×2160p (24Hz)
****SDI Support Format| 720p (60/59.94/50/30/29/25/24/23.98) 1080i (60/59.94/50) 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
Input Voltage| DC: 7～24V
Power| ≦9W
Battery Plate| F970 Battery Plate
Install Way| 1/4-20 mount points (top, bottom, right)
Working| -20℃～50℃
Storage| -30℃～60℃
Unit Size| 151Lx92Hx31.4D (mm)
Unit Weight**| 203g

Trouble Shooting

6.1 Only black and white or monochrome picture:

please check saturation, brightness & contrast adjustment.
Please check “Check Field” is in black, white or monochrome image or other condition.

6.2 NO Image after put on the power

Check if signal cable connecting is in good condition.
Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.

6.3 Earphone No sound
Check if Volume control do not open, press the volume button, and try to increase the volume.