TESLA 32E320BH 32 Inch FHD TV User Manual

TESLA 32E320BH 32 Inch FHD TV

SAFETY INFORMATION

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operting in the literature accompanying the appliance.

Warning
The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

IMPORTANT SAFETY PRECAUTIONS

1.  Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug as two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at Plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments /accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus \m’ combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.
    Caution:

14. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

15. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

16. The socket-out shall be installed near the equipment and shall be easily accessible.

17. This product should never be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufactures instructions have been adhered to.

18. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the apparatus.

19. Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).

20. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

21. Never place the TY, remote control or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times.

22. The USB terminal should be loaded with 0.5 A under normal operation.
    These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions. unless you are qualified to do so.

23. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

24. [QI This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth

25. The maximum using environment temperature is 45 degrees. The Maximum using altitude is 2000 meters

INSTALLATION

TV Buttons And Terminal Interface

TV Buttons

• Display/Hide Key Icon: When there is no button icon popping up,press the key, they key icon will pop up like the picture shows above, the key icon will automatically turn off after 5 seconds of inactivity.
• Icon selection: Short pres the button, move the loop to the right, select the icon.
• Icon function selction : Long press the key to achieving the fuction of the selected icon.

Icon Description:

• Power off Icon: Corresponding to the “POWER ‘botton of remote.
• Menu Icon: Corresponding to the “MENU” button of remote.
• Source Icon: Corresponding to the “SOURCE” button of remote.
• CH+ Icon: Corresponding to the “CH+” button of the remote.
• CH- Icon: Corresponding to the “CH-” button of the remote.
• Volume+ Icon: Corresponding to the “Volume+ ” button of remote.
• Volume- Icon: Corresponding to the “Volume- ” button of remote

First Time Installation

1. TV will enter First Time Installation (or press MENU on remote, select SETUP>First Time Installation)
2. Follow the on-screen steps to setup language, country and channel scan.

SPECIFICATIONS

• Screen Size Power Consumption
• 32 56W

Main accessories

• User’s manual x1
• Remote controller x1
• Power cord x1
• AAA Batteries x2

REMOTE CONTROLLER

• POWER
  Set your TV to power on or standby mode.

• MUTE
  Press to mute the sound. Press again or press VOL+ to unmute.

• NUMBER BUTTONS
  Press 0-9 to select a TV channel directly when you are watching TV. The channel change after 2 seconds. Applicable for entering page number in teletext mode and so on.

• MTS: Press to search the NICAM different picture settings.

• MENU
  Allows you to navigate the on-screen menus.

• SOURCE
  Open the main menu, press to list the sources.

• THUMBSTICK (.&. /T /◄ /►/ENTER) Allows you to navigate the on-screen menus and adjust the system settings.

• DISPLAY
  Press to display the source and channel’s information.

• EXIT
  Exit from the menu or sub-menu and cancel the function in progress (if applicable).

• TV/RADIO: When watching channel, allows you to switch between TV and Radio modes.

• GUIDE: Launches the EPG (Electronic Program Guide).

• CANCEL: When a page is selected in the mode of text, it may take some time before it becomes available, pressing the CANCEL key will return to the TV mode. When the required page is found, the page number will appear at the top of the TV picture, press the CANCEL key to return to the mode of text for you to browse this page.
  : Previous chapter in PVR or Media Player mode.

• INDEX: Request the Index page in Teletext mode.

• : Exit the playing function in PVR or Media Player mode.

• SIZE: Change the size of display in Teletext mode.

• REVEAL: Reveal or Hide the hidden words.

• COLOR BUTTONS: Teletex switch of the analog parts, the items selection in the menu of the digital parts and the practice of the MHEG-5 in the DVB menu.

• CH+/CH-: Press to scan through channel FAY: Press to open the favorite list. ASPECT: Select picture scale.
  : Fast forward in PVR or Media Player mode.

• SUB. PG: Press to access sub page.

• : Next chapter in PVR or Media Playe mode.

• SUBTITLE : To show and set the language of current DTV.

• HOLD: HOLD On or Off for current pager display.

• TTX: Switch the teletext on and off. REC LIST: Show the recorded list.

• REC: Record begin in PVR mode.

Battery Installation
Remove the battery compartment lid on the rear of the remote control by sliding the lid down, then off. Put two AAA batteries inside the battery compartment with their+ and – ends aligned as indicated. Do not mix old and new batteries or different types of batteries. Slide the lid until you hear it click into place.

Using the Remote Control
Unless stated, otherwise, the remote control can operate all the features of the TV.
Always point the remote control directly at the remote sensor in front of the TV.
Note: Picture for reference purposes only.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>