billboard KR742 True Wireless Earhooks User Manual

June 8, 2024
Billboard

billboard KR742 True Wireless Earhooks

billboard-KR742-True-Wireless-Earhooks-product

THANK YOU FOR PURCHASING OUR PRODUUCT. WE HOPE YOU ENJOY IT AS MUCH AS WE DO.

FOR INITIAL USE, PLEASE MAKE SURE THE EARPHONES AND THE CASE ARE FULLY CHARGED.

True Wireless Earbuds USER MANUAL

Introduction

Thank you for purchasing the Billboard Irue Wireless karhooks. For best use of this device we recommend carefully reading this user manual and keeping it for your records

Package Contents

  • True Wireless Earbuds
  • Charging cable
  • Charging case
  • Instruction manual
  • Ear gels

Device Safety

  • Your True Wireless Earhooks have internal rechargeable batteries. Improper usage may result in the Earhooks becoming hot, ignite or burst and cause injury if exposed to conditions of abuse.
  • Do not disassemble, throw away or damage the True Wireless Earhooks. Store the True Wireless Earhooks in a dry place, keeping them away from damp corrosive materials and environments such as salt air.
  • Keep the True Wireless Earhooks away from direct Sunlight, fire and high voltage equipment. Do not store the TrueWireless Earhooks inside a car during hot weather. Remember a closed car acts as a green house allowing the inside to reach high temperatures.
  • The True Wireless Earhooks are not a toy. Please keep them out of the reach of young children. Please do not discard the True Wireless Earhooks.
  • Consult your local waste collection agency for proper disposalor recycling methods. You may also contact “Call2Recycle” at 877-273-2925 or online at “call2recycle.org for a battery recycling drop off location near you.

Charging the earbuds

  1. Pug the earbuds into the charging case, the charging case indicator will be solid blue and the earbuds indicator will be solid blue during charging9
  2. When the battery of earbuds is fully charged, the indicator will turm off.

Charging the charging case

  1. Please plug the charger cable into the charging case.
  2. Connect the charger to a USB power source, the charging case indicator will lash red during charging. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the batteries fully may take hours.
  3. When the battery of the charging case is fuly charged, the red indicator light will be solid. Disconnect the charger from the USB power source and the charging case.

FCC Information

FCC ID:2AML6KR742
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. federal communications commission (FCC Statement his Equipment has been tested and Tound to comply With the limits Tor a Cass B digital device, pursuant to Part 15 Or tne F rules.nese limiS are designed to provide reasonabie protection against harmful interference in a residential installation. I his equipment generates, uses and can radiate radio trequency energy and, iT not installed and used in accordance with the instructions, may cause  harmrul interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. It thiS equipment does cause  harmful interference to radio or television reception, whichcan be derermined by turning the equipment OTT and on, the user IS encouraged to try to correct the interTerence by one or more of the following measures:

  • Reorient or relocate tne recelving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receilver is connected.
  • Consult the dealer or an experienced radio/TV/ technician tor help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. lested to comply With FCC standards.

FOR HOME OR OFFICE USE.
Warning:
This equipment complies withFCC RE radiation exposure imits set forth for an uncontrolled environment. Ihis device and its antennafs) must not be co- located or conjunction with any other antenna or transmitter.

Power on/Power off

  1. Take the earbuds out from the charging case the earbuds will turn on automatically,if not please long press the MFB to turn on.
  2. Long press the Multifunction button until power off.

Pairing One Earbud

  1. Activate the Bluetooths feature on your phone, and set the phone to search for wireless devices.(See the User Manual for your device)
  2. Tap the Earbuds on your device displayed as BB-BT-EB. if pass code is requested enter 0000)
    • When it isnt paired, the earbud will turn off automaticaly in a rew minutes.

Pairing Two Earbuds

  1. Two earbuds will pair automatically when you turn on the earbuds.lf they don’t pair automatically, please double click either side of Mutifunction button) When pairing is successful, the primary earbud will flash blue and red, the secondary earbud will not flash any light.
  2. Activate the Bluetooth feature on your device, and set the device to discovery mode to search for wireless devices.(See the User Manual for your device) fyou’ve previously paired a single earbud, the paired set should be paired as a new device with the name below.
  3. Tap the earbuds on your device displayed as BB-BT-EB. (if pass code is requested enter 0000) Once the Earbuds have been paired, they will automatically pair with each other and your device, when they are powered on and Bluetooth is activated on your device.
  4. When they arent paired, the earbuds will turn off automatically in a few minutes.

Music & Audio

  1. press & release either MFB to get your music to pause and
  2. Press & release either MFB to get your music playing again
  3. Press 2x right MFB to skip to the next track and
  4. Press 2x let MFB to skip to the previous track
  5. Press 3x right MFB to increase volume.
  6. Press 3x left MFB to decrease volume.

Bluetooth Calling

  • Press &release either MFB to answer a call.
  • Press & release either MFB to end a call.
  • Press 4x either MFB to redial the last dialed number.
  • Press and hold either MFB for 1.5-2 seconds to reject a call.

Activate Siri
Long press either MFB for 1.5-2 seconds to activate Siri. Press either MFB to exit Siri.

Battery Information

Your ear hooks are powered by a rechargeable battery. The full performance of new batteries is achieved only after two to three complete charge and discharge cycles. The batteries can be charged and discharged hundreds of times, but it will eventually wear out.

  • Do not leave a fully charged ear hooks connected toa the charger, overcharging may shorten their lifetime, f left unused, fully charged earbud batteries will lose their Charge over time.
  • Never use any charger that is damaged
  • Leaving the device in hot or cold places will reduce the capacity and lifetime of the batteries. The optimal temperature for the batteries is between 59 and 7/E.
  • A device with a hot or cold battery may not work temporarily, even when the batteries are fully charged.
  • Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Always dispose of batteries according to local regulations. Please recycle. Do not dispose as household waste. Billboard Media, LLC Billboard, and the Billboard logo are registered trademarks of Billboard IP Holdings, LLC. Used under license, Manufactured By ESI Cases & Accessories One Gateway Center Suite 2600 Newark, NJ 07102 TechSupport@esicellular.com

All other trademarks are the property of their respective companies. The Bluetooth” word mark and logos are registered trademarks owned by Bluetooth SlG, Inc. It may damage your hearing if you listen at a high volume for a long time. It is recommended you use the lowest volume possible for listening to music.

LIMITED WARRANTY

ESI Cases & Accessories, Inc, warrants to the first consumer purchaser that this product, when shipped in its original container to the original purchaser will be free from defective workmanship and materials for one year and agrees that it will, at its option, either repair the defect or replace the defective product or part thereof at no charge to the purchaser for parts or labor for the time periods described. This warranty does not apply to any appearance items of the product nor to the additional excluded item(s) set forth below nor at any product the exterior of which has been damaged or defaced which design or construction. The limited warranty described herein is in addition to applicable law.

ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OF ORIGINAL PURCHASE SET FORTH BELOW.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration of eyond the time period described herein on the behalf of ES any warranties Cases & Accessories, Inc. The warranties described herein shall be the sole and exclusive warranties granted by ESI Cases & Accessories, Inc. and shall be the sole and exclusive remedy available to the purchaser corrections of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of ESI Cases &Accessories, Inc. to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract negligence, strict liabilities and responsibilities of ES1 responsible, for any incidental of consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO es & Accessories, Inc. be liable or in any way STATE.

This warranty does not cover cables that have become frayed, cracked, or broken from use. The user should immediately replace this, or any, charge cable that has become frayed, cracked, or broken, as it may constitute a serious safety risk, including electrocution, if it is continued to be used. Send product with $11.95 shipping & handling fee to: ESI Cases & Accessories One Gateway Center, Suite 2600 Newark, NJ 07102 TechSupport@ESICellular.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals