billboard BB2530 8 Inch Speaker Instruction Manual

billboard BB2530 8 Inch Speaker

BACK PANEL

Product features

• Ultra-low distortion amplifying circuit
• Built-in MP3 encoding supporting U disk
• Unique acoustic appearance design
• Professional treble and bass gain controlling circuit
• Built-in battery for outdoor activities
• Built-in professional microphone system
• Professional high-effective loud-speaking unit
• Compatible with DVDNCD/PC and other sound sources
• Suitable for adaptor and charging
• Intelligent power switch charging circuit

Warning

1. Do not place objects on top of the device,as objects may scratch the device.
2. Do not expose the device to dirty or dusty environments.
3. Do not insert any foreign objects into the device.
4. Do not expose the device to strong magnetic or electrical field.
5. Do not use the device in the rain.
6. Please check with your Local Authority or retailer for proper disposal of electronic products.
7. Do not disassemble the device. Only a certified service technician should perform repair.
8. The device has apertures to disperse heat.Do not block the device may become hot and malfunction as a result.

Powering up your speaker

1. Plug the micro USB plug into your speaker’s micro USB charging port
2. Plug the USB side of your cable into your computer or laptop’s USB charging port, or into a standard USB charger (not included)
3. Make certain that your computer or laptop is powered on, or the USB charger is plugged in to begin charging.
4. The Charging indicator LED light. When charging, the light will turn on. When full charged, the light will turn off.
5. Move the power switch to the ON position. The LED display should activate.
6. Adjust the volume control to the MIN position before connecting a device.
7. You’re now ready to connect your device!

FOR MAXIMUM BATTERY LIFE, IT IS IMPORTANT TO FULLY CHARGE YOUR BATTERY

PRIOR TO USE.

Connecting your BLUETOOTH TM Device

Your speaker can play almost all Bluetooth devices by simply pairing the device to the speaker. Please follow these steps to properly pair your device to your speaker.

1. Press the Mode button to choose the input signal source as BT channel when starting the machine.
2. Navigate to the Bluetooth section on your device and select “browse for devices’
3. Look for the speaker device name “BB-BT-SP” and press connect.
4. You should hear a connection sound on your speaker and your device should display”connected when the connection is successful, “tick” tone will prompt. If the speaker can’t be connected,please restart the speaker or the device and try again.
5. Play the music from your device and adjust the volume on your device.
6. Adjust the master volume level on the speaker to your desired volume level.

Instruction of U disk MP3 encoding playing

When you need to use the built-in MP3 encoding function, please format your”US­
B” disk (U disk for short below) as FA-T32 format in the computer first and then copy the file in MP3 format in U disk. When reading U disk, the encoding system will engage in encoding playing according to the generation sequence of MP3 songs file. Therefore, the song which is copied to U disk first will be played in priority or vice versa. When the user needs to play according to the specific sequence, they can arrange the copying sequence. If the files copied to U disk can not be played, please inspect whether the file format is in MP3 format. If not, please switch to MP3 format in the computer and then copy to U disk in order to play normally. When copying MP3 file, you shall copy to the cat­alogue of U disk. It is suggested to delete all the unnecessary files and file catalogs in order to reduce the occurrence of reading error when the encoding is played. When the user buys U disk, please select the ones with better quality and internal encoding supporting 64MB/128MB/256MB/512MB/1 GB/2GB/4GB/8GB and other volumes. During the playing process, please make it far away from the places with high temperature, high magnetic field and high- frequency interference. In case of crash, please close the power and restart for recovery!

Operation of FM receiving function

TWS key-pressing: press the key and the radio will scan the local radio station and save it automatically.
CH+ key-pressing: press the key and the radio will read the saved radio station and select the next one in ascending order;
CH- key-pressing: press the key and the radio will read the saved radio station and select the previous one in descending order;

TWS function

Turn on two speakers, make sure the two speakers are in BT mode,long-press the
“TWS” button. After an indication voice sounds, two speakers could be connected with the same Bluetooth device and then play music together.

Panel/rear plate/MP3 function and operation

Volume: it is used to adjust the sound of volume.
ECHO: it is used to adjust the music frequency curve and gain
and attenuation within certain frequencies.
LINE IN (external audio interface): it is used to connect the compatible audio equipment such as DVC and computer.
Display screen of MP3 encoding player: it is used to display the playing track, playing time or the receiving rate under receiving status.
USB interface (U disk interface): when MP3 function of U disk is need­ed, insert the U disk with MP3 songs to the interface.
TF CARD (interface of TF card): insert TF card with copied MP3 songs to the interface.
Key: pressing the key to switch pause status underplaying status or vice versa.
AUDIO INPUT: it is used to switch to use the external audio or built-in MP3 encoding sound as the signal source of audio amplifier.
MODE: press the key for switch mode.Long-press for the led light switch.

Battery information

Your device is powered by a rechargeable battery. The full performance of new batteries is achieved only after two to three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Do not leave fully charged Speaker connected to a charger, overcharging may shorten their lifetime. If left unused, fully charged Speaker batteries will lose their charge over time. Never use any charger or cord that is damaged. Leaving the device in hot or cold places will reduce the capacity and lifetime of the batteries. Optimal temperature for the batteries is between 59’F and 77° F. A device with a hot or cold battery may not work temporarily, even when the batteries are fully charged.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Always dispose of batteries according to local regulations. Please recycle. Do not dispose as household waste.

Device Safety

• Your Wireless Speaker have an internal rechargeable battery. Improper usage may result in the Speaker becoming hot, igniting or bursting and causing injury if exposed to conditions of abuse.
• Do not disassemble, throw away or damage the Wireless Speaker.• Store the Wireless Speaker in a dry place, keeping them away from damp corrosive materials and environments such as salt air
• Keep the Wireless Speaker away from direct sunlight, fire and high voltage equipment. Do not store the Wireless Speaker inside a car during hot weather. Remember a closed car acts as a greenhouse allowing the inside to reach high temperatures.
• The Wireless Speaker are not a toy. Please keep them out of the reach of young children.
• Please do not discard the Wireless Speaker.Consult your local waste collection agency for proper disposal or recycling methods. You may also contact” Call2Recycle” at 877- 273- 2925 or online at “call2recycle.org” for a battery recycling drop-off location near you.

Charging The Battery

1. Plug the charger cable into the charge port.
2. Connect the charger to a USB power source. The red indicator light will display during charging. If charging does not start, disconnect the charger plug it in again, and retry. Charging the battery fully may take hours.
3. When the battery is fully charged, the red indicator light will turn off. Discon­nect the charger from the USB power source and the Speaker. The fully charged battery has power for hours of music time.
4. Important! To prevent a complete discharge of your Speaker’ battery, charge them up at least every six months.

LIMITED WARRANTY

ESI Cases & Accessories, Inc., warrants to the first consumer purchaser that this product, when shipped in its original container to the original pur­chaser will be free from defective workmanship and materials for one year and agrees that it will, at its option, either repair the defect and replace the defective product or part thereof at no charge to the purchaser for parts or labor for the time periods described.
This warranty does not apply to any appearance items of the product nor to the additional excluded item(s) set forth below nor at any product the exte­rior of which has been damaged or defaced which design or construction. The limited warranty described herein is in addition to applicable law.

ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OF ORIGINAL PURCHASE SET FORTH BELOW

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration of any warranties be­yond the time period described herein on the behalf of ESI Cases & Acces­sories, Inc.

The warranties described herein shall be the sole and exclusive
Warranties granted by ESI Cases & Accessories, Inc. and shall be the sole and exclusive remedy available to the purchaser corrections of defects, in the manner and for the period of time described herein, shall constitute com­plete fulfillment of all liabilities and responsibilities of ESI Cases & Acces­sories, Inc. to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract
negligence, strict liabilities and responsibilities of ESI Cases & Accessories, Inc. be liable or in any way responsible, for any incidental of consequential damages, so the above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
Manufactured By:
ESI Cases & Accessories
One Gateway Center, Suite 2600
Newark, NJ 07 102
Tech Support: 212-883-8838
TechSupport@ESICellular.com

Return Instructions

If your speaker malfunctions during the warranty period of one calendar year (90 days for battery), contact our customer service department at 212-883-8838 to obtain troubleshooting information. If troubleshooting assistance fails to remedy the problem, you will receive a return authorization # and instructions for sending your unit to our Service Center. Your return authorization number must be clearly visible and placed on the outside of box when the unit is returned.
Enclose a copy of your original proof of purchase showing the original purchase date, along with detailed information describing the exact nature of your problem. Be sure to include your complete name, address, email address, daytime and evening contact numbers. In addition, please send a check or money order made payable
to “ESI Cases & Accessories ” for return freight amount (given to you by our service agents). All of the above must be included with your return, or your package will not be eligible for service under our warranty.
The customer is responsible for packing the speaker in it’s original carton or equiva­lent, and for insuring, and shipping the unit to our service center. Please make sure to pack all accessories included with your speaker so that we can properly identify any issues. All freight cost to return the unit to ESI Cases & Accessories., are the respon­sibility of the customer. If your speaker is under warranty, then ESI Cases & Accesso­ries. will at its sole discretion, exchange or repair the speaker without charge for parts and labor. The customer is responsible for return freight and should include a check or money order payable to “ESI Cases & Accessories:’ with your return for the return freight amount. Any shipments received without a Return Authorization number will
be refused. For more details please contact our customer service department.
Send product:
ESI Cases & Accessories
One Gateway Center, Suite 2600
Newark, NJ 07 102
Tech Support: 212-883-8838
TechSupport@ESICellular.com

FCC Information

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: ( 1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission
(FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV /technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME OR OFFICE USE.
Warning: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
Bluetooth® is a registered trademark of Bluetooth® SIG
All other trademarks are property of their respective companies.

BATTERY CAUTION: Do not disassemble, short circuit, or expose to fire or high temperature. Properly connect specified devices. Recycle battery according to local, state and national regulations.

WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN
HAZARDOUS National Button Battery Ingestion Hotline- 800-498-8666

WARNING: This product can expose you to chemical Di(2-Ethylhexyl) phthalate, which is known to the State of California to cause cancer and birth defects. For more information go to www.P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>