billboard BB2710 Portable Party Speaker Instruction Manual
- June 5, 2024
- Billboard
Table of Contents
2×10″ PORTABLE
PARTY SPEAKER
model # 9132710
Instruction Manual
Instrucciones en espanol Incluldas
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED
TECHNICIAN
To prevent fire or electric shock, do not expose this equipment to rain or
moisture. Do not store or operate this product near any liquids, heat sources
such as radiators, or heat registers. Clean only with a dry cloth. Users
should exhibit extra safety when this symbol appears In this instruction
manual and follow all precautions as they are stated.
BB2710 BATTERY
The 682710 is a lithium battery-powered PA loudspeaker. Be sure that you have
completely charged the battery prior to first use to maximize the battery’s
lifespan Once the power adapter is connected to a power source, it will
automatically begin charging ( 3-4 hours to fully charge the lithium battery )
Even lithe battery power is low, it will power on when connected to a power
source. The Battery Indicator icon is always red when charging to a full
situation. Upon completion of the charging, please disconnect the unit. With
standard usage, a fully charged battery can play for about 2-3 hours. The
battery can be recharged about 300 times in its lifetime. When not in use, the
speaker should always be set OFF to prevent the unit from draining the
battery. When the unit is not used for prolonged periods of time, the battery
will gradually lose its power. It is recommended to fully charge the battery
at least every 60 days.
BB2710 BLUETOOTH
Bluetooth Mode: Open the Bluetooth of the phone. And the Bluetooth name of the unit called 11B-BT-Sr to connect After a successful match, you can play the music from the speaker. You won’t need to reconnect the Bluetooth when switching mode.
BB2710 REAR PANEL
- Power Switch: ON/OFF
- Light Switch: ON/OFF
- Master volume Knob: Adjust from Min to Max
- Bass Knob: Adjust from Min to Max
- Treble Knob: Adjust from Min to Max
- Echo of Microphone Adjustment: Adjust from Min to Max
- Microphone Volume Knob: Adjust from Min to Max
- Microphone Input 1
- Microphone Input 2
- Power Supply: DC 9V 1.5A
- AUX IN
- USB Slot
- TF Card Slot
- Battery Indicator light
- Mode Button: Toggle between AUX, USB, TF, FM, BT
Previous Track Button: Select the previous track Play/Pause Button
Next Track Button: Select next track REC/PLAY
MIC Priority: ON/OFF
BB2710 DISPLAY SYSTEM SETTINGS
- Input Mode: The LED display screen will display the information on Input mode for USB/TF/BT AUX /FM. When a USB flash drive /TF Card is inserted into the USB/TF input, the unit will automatically switch to USB/TF mode and begin playing Mp3 audio files from the USB flash drive /TF Card.
- Track Number: The tracking number currently playing from the USB/TF will display.
- FM Mode: All FM channels display here. Short Press the “play/pause” button to auto scan all channels. FM frequency is 87.5-108.0MHz.
BB2710 REMOTE CONTROL
- STANDBY: Make the unit to be standby mode.
- Input Mode Button:Toggle between USB,TF,FM,AUX,BT
- Mute: Mute the track
- PLAY/PAUSE
- Previous Track: Select the previous channel
- Next Track: Select the next channel.
- EQ: Select EQ mode.
- VOL-:Reduce the master volume
- VOL+: Increase the master volume
- REP: Repeat the playing track.
- Press to Scan Channel in FM Mode 12-21.KEY Number for selecting the curtain track for USB flash drive or TF card.
NOTE: #10 Repeat mode is only available for the USB and Micro-SD functions.
BB2710 Recording Function
Put the USB/TF card in the slot. Then Insert the wired microphone, and make
sure it is working. Long press “REC PLAY “to start recording sound, Then short
press “REC PLAY “to play the recording file. Press again to exit the recording
function.
BB2710 TWS CONNECTION
(1) TWS connection: TWS Connection is only for two speakers, and can not
support quantities over 2 PCS.
(2) Turn on the Speakers, press the MODE button to switch to BLUETOOTH mode,
and the word “BLUE” on the LED screen will flash.
(3) At the first time, please press the Play/Pause (TWS) button for 3 seconds.
Then two speakers will connect together.
(4) Connect the phone: Open the phone Bluetooth settings, Search and Connect
the main device Bluetooth Name “BB-BT-SP”.
(5)Select music from the phone and enjoy TWS playing in pairs with two
Speakers.
(6) Exit TWS: Long press the Play/Pause (TWS) button for 3 seconds to exit the
TWS function
LIMITED WARRANTY
ESI Cases & Accessories, Inc., warrants to the first consumer purchaser that
this product, when shipped in its original container to the original purchaser
will be free from defective workmanship and materials for one year and agrees
that it will, at its option, either repair the defect and replace the
defective product or part thereof at no charge to the purchaser for parts or
labor for the time periods described.
This warranty does not apply to any appearance items of the product nor to the
additional excluded item(s) set forth below nor to any Product the exterior of
which has been damaged or defaced which design or construction. The limited
warranty described herein is in addition to applicable law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OF ORIGINAL PURCHASE SET FORTH
BELOW.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you. Neither the sales personnel of the
seller nor any other person is authorized to make any warranties other than
those described herein or to extend the duration of any warranties beyond the
time period described herein on the behalf of ESI Cases & Accessories, Inc.
The warranties described herein shall be the sole and exclusive warranties
granted by ESI Cases & Accessories, Inc. and shall be the sole and exclusive
remedy available to the purchaser corrections of defects, in the manner and
for the period of time described herein, shall constitute complete fulfillment
of all liabilities and responsibilities of ESI Cases & Accessories, Inc. to
the purchaser with respect to the product and shall constitute full
satisfaction of all claims, whether based on contract negligence, strict
liabilities and responsibilities of ESI Cases & Accessories, Inc. be liable or
in any way responsible, for any incidental or consequential damages, so the
above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
Manufactured By:
ESI Cases & Accessories
44 East 32nd Street
New York, NY 10016
Tech Support: 212-883-8838
[email protected]
Return Instructions
If your speaker malfunctions during the warranty period of one calendar year
(90 days for battery), contact our customer service department at
212-883-8838 to obtain troubleshooting
information. If troubleshooting assistance fails to remedy the problem, you
will receive a return authorization # and instructions for sending your unit
to our Service Center. Your return authorization number must be clearly
visible and placed on the outside of the box when the unit is returned.
Enclose a copy of your original proof of purchase showing the original
purchase date, along with detailed information describing the exact nature of
your problem. Be sure to include your complete name, address, email address,
and daytime and evening contact numbers. In addition, please send a check or
money order made payable to “ESI Cases & Accessories “for the return freight
amount (given to you by our service agents). All of the above must be included
with your return, or your package will not be eligible for service under our
warranty.
The customer is responsible for packing the speaker in its original carton or
equivalent, and for ensuring, and shipping the unit to our service center.
Please make sure to pack all accessories included with your speaker so that we
can properly identify any issues. All freight costs to return the unit to ESI
Cases & Accessories., are the responsibility of the customer. If your speaker
is under warranty, then ESI Cases & Accessories. will at its sole discretion,
exchange or repair the speaker without charge for parts and labor. The
customer is responsible for return freight and should include a check or money
order payable to “ESI Cases & Accessories!’ with your return for the return
freight amount. Any shipments received without a Return Authorization number
will be refused. For more details please contact our customer service
department.
Send product:
ESI Cases & Accessories
44 East 32nd Street
New York, NY 10016
Tech Support: 212-883-8838
[email protected]
Bluetooth is a registered trademark of Bluetooth SIG All other trademarks are
property of their respective companies.
© 2021 Billboard IP Holdings, LLC. All rights reserved. Billboard°, the
Billboard logo, HOT 100, And associated characters, trademarks, and design
elements are owned and licensed by Billboard IP Holdings, LLC.
FCC Information FCC ID: OGGK3BE3271 0
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received;
including interference that may cause undesired operation. Federal
Communications Commission (FCC) StatementThis Equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV/technician for help.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. Tested to comply with FCC standards. FOR HOME OR OFFICE
USE. Warning: This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This device and its antenna(s) must
not be co-located or in conjunction with any other antenna or transmitter.
WARNING: CHOKING HAZARD-Small parts. Not for children under 3 years.
BATTERY CAUTION: Do not disassemble, short circuit, or expose to fire or
high temperature. Properly connect specified devices. Recycle batteries
according to local, state, and national regulations.
It may damage your hearing if you listen with a high volume for a long time.
It is recommended you use the lowest volume possible for listening to music.
WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARDOUS National Button
Battery Ingestion Hotline- 800-498-8666
ADVERTENCIA: ****NO INGIERA LA BATEReA, QUEMADURA QUeMICA L’nea directa de
ingestion—n de batter’s de bot—n Nacional
PELIGROSO800-498-8666